Von Experten für Experten

What are Strain Gauges? Strain gauges convert mechanical deformation into measurable resistance changes through the piezoresistive effect. Small resistance shifts are detected using a Wheatstone bridge with amplification and temperature compensation. Common types include linear, diaphragm, rosette, torsion, and dual-parallel gauges—each suited to specific stress directions and materials. Used widely in structural testing, load and pressure measurement, and industrial condition monitoring, strain gauges provide precise data essential for safety, performance, and predictive maintenance across engineering applications.

Getaggt als:Blog, Get Curious

Understanding Thermocouple Wire Wire that is used in a thermocouple from the point of sensing to the point of cold junction compensation (cjc end) where the signal is measured.

Getaggt als:Product Info, Get Curious

All About Pressure Sensors Pressure measurement isn’t one-size-fits-all. From strain gauge to piezoelectric designs, different pressure transducers serve unique applications. This guide breaks down the main types, explains how they work, and shows you how to choose the right sensor for accurate, reliable performance. #Engineering #Sensors #IndustrialAutomation

Getaggt als:Blog, Get Curious

What is a Wheatstone Bridge? In order to measure strain with a bonded resistance strain gauge, it must be connected to an electric circuit that is capable of measuring the minute changes in resistance corresponding to strain.

Getaggt als:Technical Learning, Get Curious

What Are the Differences Between 2-Wire, 3-Wire, and 4-Wire RTDs? A Resistance Temperature Detector (RTD) measures temperature using a resistor with a resistance value that changes as its temperature increases or decreases. RTDs are typically manufactured in three different wiring configurations: 2-wire, 3-wire, and 4-wire. Each configuration is designed to compensate for lead wire resistance to varying degrees, impacting measurement accuracy.

Getaggt als:Product Info, Get Curious

What are Electromagnetic Flow Meters? A magnetic flow meter (mag flow meter) is a volumetric flow meter which does not have any moving parts and is ideal for wastewater applications or any dirty liquid which is conductive or water based.

Getaggt als:Product Info, Get Curious

What is a Thermal Imaging Camera? A thermal imager is a non-contact temperature measurement device.

Getaggt als:Product Info, Get Curious

Ultrasonic Level Sensors in Action By installing level sensors, operators can be proactive and monitor liquid levels - ensuring environmental regulations associated with the design and operation are consistently met.

Getaggt als:Technical Learning, Get Curious

Brewing Up Precision In this application, the purpose is to measure the temperature of the motor in an industrial coffee grinder during the grinding process to better understand the strain on the motor.

Getaggt als:Blog, Get Curious

Installation Obstacles: Invasive In-Pipe Immersion Sensors When it comes to process piping systems, temperature of in-pipe media is often a necessary measurement – and one that needs to be monitored accurately. Traditionally, in-pipe immersion sensors are used. However, invasive in-pipe immersion sensors are often not ideal for use within process piping systems. Here are 3 considerations to take before installing immersion sensors in process piping systems.

Getaggt als:Technical Learning, Get Curious

A Need for Speed: How HANI Technology Was Used to Expedite the Commission of a Productivity Enhancing Investment The brewing team at Allagash Brewing Company successfully utilized the versatility, non-invasiveness, and high accuracy of the HANI Clamp Temperature Sensor – which clamps right onto the outside of a desired pipe and measures the fluid inside with as much accuracy and with the same high performance as traditional sensors – to expedite the commissioning process and meet their ROI of an important investment to their system.

Getaggt als:Blog, Get Curious

The Future is Bright: Omega’s Own Co-Op Wins Prestigious Award The Omega Co-Op/Internship Program was created to help students grow and realize their full potential - setting them up with the experiences and tools needed to excel in their future careers. We sit down with one of our latest engineer co-ops, David Austin, to find out more about his time with Omega and his recent award from Drexel University.

Getaggt als:Blog, Get Curious

How to Monitor Walk-In Freezer Temperatures with IIoT Devices Maintaining optimal freezer temperatures is essential in protecting quality, ensuring food safety & reducing waste. Learn how companies are using Omega's products.

Getaggt als:Technical Learning, Get Curious

An Introduction to Industrial pH Measurement and Control In this article how pH describes the degree of acidity or alkalinity of a solution and how is measured is explained. Click here to learn how it´s done.

Getaggt als:Technical Learning, Get Curious

HANI Application: Temperature Monitoring for CIP Processes in Beer Brewing Systems

Getaggt als:Technical Learning, Get Curious

HANI Clamp Things to Know - Thermal Conductivity

Getaggt als:Product Info, Get Going

HANI Clamp Things to Know - Pipe Types, Sizes, and Metals

Getaggt als:Product Info, Get Going

Types of Accelerometers An accelerometer is a device that can measure acceleration experienced by an object. However, there are many types of accelerometers. In this article you will learn about those.

Getaggt als:Technical Learning, Get Curious

What to Look for When Selecting Accelerometers There are some specifications that you should always look when selecting an accelerometer. In this article the most important factors are explained.

Getaggt als:Technical Learning, Get Curious

Why Calibration Certificates Matter Calibration certificates validate the device’s accuracy levels to a standardized reference.

Getaggt als:Technical Learning, Get Curious

Measurement of Outflow Facility in the Eye Glaucoma is a world-leading cause of blindness. The major risk factor for glaucoma is elevated intraocular pressure (IOP), with the sole treatment for glaucoma patients being to reduce the IOP.

Getaggt als:Technical Learning, Get Curious

Advantages of New OMEGA PCC-SMD for Cold Junction Compensation OMEGA’s new PCC-SMD unique features make integration of cold junction compensation easier than it ever has been before.

Getaggt als:Technical Learning, Get Curious

K-Type Thermocouples A Type K thermocouple refers to any temperature sensor containing Chromel and Alumel conductors, that meets the output requirements as stated in ANSI/ASTM E230 or IEC 60584 for Type K thermocouples

Getaggt als:Technical Learning, Get Curious

What Are The Most Common Applications for Thermocouples? Thermocouples are used in a wide range of applications.

Getaggt als:Technical Learning, Get Curious

How to Install Thermocouples for Accurate Temperature Readings When connecting thermocouples to other devices care needs to be taken to ensure that the proper polarity is maintained.

Getaggt als:Technical Learning, Get Curious

FAQ: Thermocouple Characteristics and Specifications Thermocouples do have positive and negative wires, in order to read a correct temperature the polarity needs to be maintained throughout the circuit.

Getaggt als:Technical Learning, Get Curious

Thermocouple Styles and Constructions Thermocouples come in three types of junctions, Grounded, Ungrounded and Exposed.

Getaggt als:Technical Learning, Get Curious

Common Techniques to Calibrate Thermocouples Thermocouples are usually calibrated in one of three ways depending on the accuracy needed and the conditions where the calibration takes place.

Getaggt als:Technical Learning, Get Curious

FAQ: Thermocouple Installations When more than one measurement is needed, dual thermocouples provide that extra measurement signal.

Getaggt als:Technical Learning, Get Curious

A Deeper Dive into Pressure Transducers Pressure transducers are vital in underwater settings, ensuring equipment reliability and safety across various applications. Key considerations include material selection, sealing, depth rating, and signal output.

Getaggt als:Technical Learning, Get Curious

Pressure Transducer and Controllers Pressure not only needs to be measured, but your system needs to make changes based on pressure readings as well.

Getaggt als:Technical Learning, Get Curious

Pressure Transducer and Amplifier Selection Choosing the proper amplifier depends on the type of signal that your system needs.

Getaggt als:Technical Learning, Get Curious

Pressure Transducer for Gases ‘Gas’ is an incredibly broad term. Many industries use gas, but not every industry needs to accurately measure the pressure of the system.

Getaggt als:Technical Learning, Get Curious

Pressure Transducer for Air Air pressure was first measured all the way back in 1643: when the barometer was invented.

Getaggt als:Technical Learning, Get Curious

Pressure Transducer in Air Applications There are a wide variety of applications that need air pressure properly monitored.

Getaggt als:Technical Learning, Get Curious

Pressure Transducers and Dataloggers Data loggers are typically used to measure and store the pressure signals that a system puts out.

Getaggt als:Technical Learning, Get Curious

Pressure Measurement of Water Level Figuring out how much the water level has risen or fallen in a tank (or something similar) should be a simple task.

Getaggt als:Technical Learning, Get Curious

Pressure Transducers for Refrigerant Plenty of systems in the real world rely on the refrigeration cycle; from massive supermarket refrigeration systems to the AC unit in your car.

Getaggt als:Technical Learning, Get Curious

Pressure Transducer Specs Pressure transducers are useful in a variety of industries.

Getaggt als:Technical Learning, Get Curious

Pressure Transducer FAQ Pressure sensors may undergo contamination from the environment around it or from the working fluid that it measures.

Getaggt als:Technical Learning, Get Curious

Testing Pressure Transducers Pressure transducers are precise instruments, and like all instruments, they are prone to failure.

Getaggt als:Technical Learning, Get Curious

Pressure Calibration Procedure Calibration is an important step that helps devices to produce accurate measurements.

Getaggt als:Technical Learning, Get Curious

How to use Load Cells for Weight Measurement To measure the weight, the subject is placed on a load application point of a load cell.

Getaggt als:Technical Learning, Get Curious

Load Cell Specifications In this article all the specifications in a load cell's datasheet are explained. Click here to learn and understand more about the technical aspects.

Getaggt als:Technical Learning, Get Curious

How to Test a Load Cell? Set the multimeter in millivolts and connect the output wires of the load cell to it. Supply a excitation voltage and place a test weight on the load cell.

Getaggt als:Technical Learning, Get Curious

Why Load Cell Signal Conditioner is Critical to a Strain Gauge Setup Signal conditioners take the output from the load cell, modify it and then send it to digital monitors or data loggers.

Getaggt als:Technical Learning, Get Curious

How to Pick a Data Logger for Your Load Cell? A force to a load cell causes deformation on the strain gauge creating a electrical signal. A data logger takes that data and stores the data for later.

Getaggt als:Technical Learning, Get Curious

Load Cell Meter: Choosing the Right Strain Meters The load cell meter connects directly to the strain gauge to convert the signal into a displayed value. They can also power up the load cell.

Getaggt als:Technical Learning, Get Curious

Load Cell FAQ Have questions about load cells?

Getaggt als:Technical Learning, Get Curious

Load Cell with Remote Display To accurately read and process the load cell values, displays form an essential part of the weighing system.

Getaggt als:Technical Learning, Get Curious

Load Cell Controller A load cell controller is a device used in conjunction with a load cell to convert the electrical signals from the load cell to readable real-world values.

Getaggt als:Technical Learning, Get Curious

Load Cell Platform Scale – Example Illustration For high-precision weighing applications, load cell platform scales must measure the load accurately. To illustrate this measurement precision, an example with a test weight is explained here.

Getaggt als:Technical Learning, Get Curious

What is a Load Cell Amplifier? A load cell amplifier is a device that can increase the strength of signals coming from a load cell.

Getaggt als:Technical Learning, Get Curious

USB Load Cells: Do More with the Measurement Data Analog load cells can't record the data for further analysis. To make the load cell signals readable by a computer an USB output is useful. Read it here.

Getaggt als:Technical Learning, Get Curious

How to Achieve Precise Temperature Regulation of Experimental Materials Using a PID-Controlled Heat Source in Laboratory Applications To investigate whether the thermochromic phase change behavior of polydiacetylene thin films will be altered when placed onto a carbon substrate such as graphene, a researcher developed a transfer heat block whose temperature could be regulated over time.

Getaggt als:Application, Get Curious

How to Monitor pH Levels in a High-Temperature Environment In a process application, such as soaking wood in a water bath, unpleasant odors can be omitted. By neutralizing pH levels in the water bath, odors can be controlled.

Getaggt als:Application, Get Curious

How to Measure pH Levels in a Ruminant’s Digestive System The pH levels in each of a ruminant’s four stomachs play an essential role in a cow’s digestive process and milk production.

Getaggt als:Application, Get Curious

Load and Vibration Testing in Bicycle Manufacturing As part of a quality assurance process, a bike manufacturer developed a testing system that could quantify load and vibration forces on the physical parameters.

Getaggt als:Blog, Get Curious

Measuring the Force Applied to a Rocket Parachute Rockets deploy parachutes to aid in rapidly decreasing the rocket’s re-entry or landing speed. However, before use, it’s essential to test the system using s-beam load cells.

Getaggt als:Application, Get Curious

How to Measure the Bending Force of a Sheet Metal Bending Machine Measuring bending stress requires determining the average amount of force exerted on the material that results in a repeatable uniform surface.

Getaggt als:Application, Get Curious

How to Determine the Force Measurement of a Crossbow Crossbows work like a spring. The force and tension applied as you pull the string of the crossbow is what creates the movement and energy to propel the arrow from the bow at high speed.

Getaggt als:Application, Get Curious

Flow of Paper Stock A customer in the paper industry wanted to measure flow of paper stock pulp on a 250mm SS line with an average flow of 120-150 l/s and a pulp temperature of 45°.

Getaggt als:Application, Get Curious

Sanitary Precision Flow Measurement for Microbreweries All microbreweries need the ability to measure the liquid flow of their product in a manner that is sanitary and meets FDA regulations.

Getaggt als:Application, Get Curious

How to Bend Guitar Sides with a Silicone Heater There are several ways to bend guitar sides, including the traditional method of using a hot pipe. However, a faster and more cost-efficient method, which has become common, involves using flexible silicone heaters with a flexible thermocouple and controller.

Getaggt als:Application, Get Curious

Digital Signal Transmission In contrast to analog transducers that sense continuous variables such as pressure and temperature, many transducers provide an output that is one of two states: high or low, open or closed.

Getaggt als:Technical Learning, Get Curious

Stable and Accurate Temperature Signal Readings A number of applications require signal conditioning devices to operate in extremely harsh environments – natural gas compressors with heavy engine vibration is one example.

Getaggt als:Technical Learning, Get Going

Ship Engine Room Technology Upgrade A globally operating shipping and logistics company recently decided to refurbish a number of ships with newer technology.

Getaggt als:Technical Learning, Get Inspired

Safe and Precise Temperature Transmission and Control Stable, safe, and high precision measurement of temperature signals in all stages of the manufacturing process is of the essence at a polysulfide plant.

Getaggt als:Technical Learning, Get Curious

Re-Design of the Electrical Setup of a Mixing Station in an Ex Area Flexibility, safety, and ease-of-use were at the top of the list of requirements when a chemical manufacturer was looking for temperature converters for a mixing station re-design project.

Getaggt als:Case Study, Get Inspired

With an Isolated Repeater/Splitter A provider of electrical solutions to a wide range of customers and other electrical contractors, from temperature and pressure measurements to providing small PLC solutions needed a solution when working with temperature and isolation.

Getaggt als:Technical Learning, Get Curious

Improved Diagnostic Information Resulted in Significant Cost Savings On a recent project the data used provided by DRST-CM to develop software modules in the DCS that provide full diagnostics, a client’s company has been able to use the data for preventive maintenance.

Getaggt als:Case Study, Get Inspired

Devices Use Advanced Technology Using a temperature/mA converter and a display programming front DRST-UN and DRSL-DISPLAY for a variety of applications throughout the plant has made signal monitoring more advanced – and less complicated.

Getaggt als:Technical Learning, Get Inspired

Danish CHP Station The members of a maintenance team at a Danish power station were fed up getting error messages and false system alarms from one of the boiler’s temperature surveillance systems.

Getaggt als:Technical Learning, Get Curious

What is a Mass Flow Meter? A thermal mass flow meter measures the flow rate of gas mass based on the convective heat transfer of a heated surface to the flowing fluid.

Getaggt als:Technical Learning, Get Curious

What is a Coriolis Flow Meter and How Does it Work? A Coriolis flow meter is a type of mass flow meter. It is designed differently and works differently than thermal or differential mass flow meters.

Getaggt als:Technical Learning, Get Curious

The International Temperature Scale of 1990 (ITS-90) President of the Comité Consultatif de Thermométrie and Vice-President of the Comité International des Poids et Mesures Division of Physics, National Research Council of Canada, Ottawa, K1A OS1 Canada

Getaggt als:Case Study, Get Curious

What’s the Difference Between Thermocouples and RTDs? Selecting the best temperature sensor for your application can be a challenge. A broad range of sensors are available today, and the better you understand the key differences between them

Getaggt als:Technical Learning, Get Curious

Principles of Infrared Thermocouples The IRt/c product line represents a dramatic breakthrough in temperature sensing technology. The IRt/c sensors are unpowered, low cost, and can measure surface temperatures of materials without touching.

Getaggt als:Technical Learning, Get Curious

What is a Vortex Flow Meter? A vortex flow meter is a flow measurement device best suited for flow measurements where the introduction of moving parts presents problems.

Getaggt als:Technical Learning, Get Curious

Why Cold Junction Compensation Is Essential for Accurate Thermocouple Measurement In this article different types of cold junction compensation are review. Discover common practices when accurate thermocouple measurements are required.

Getaggt als:Technical Learning, Get Going

What are the Different Types of Thermocouples? Thermocouples are available in different combinations of metals or calibrations. The most common are the “Base Metal” thermocouples known as Types J, K, T, E and N.

Getaggt als:Technical Learning, Get Curious

Thermocouple Response Time Time constants calculated for air at room temperature and atmospheric pressure moving with velocity of 65 feet per second for thermocouples

Getaggt als:Technical Learning, Get Curious

Connecting Relays to a Digital Output Board and Noise Considerations Mechanical relays are very noisy (electrically) and they can cause problems when connecting them to a PC digital I/O card, ranging from spikes on your analog measurements to computer lockups!

Getaggt als:Case Study, Get Curious

Thermocouples - Reference Guide OMEGACLAD® is a three-part system composed of compacted MgO insulation, thermocouple wire and metal sheath.

Getaggt als:Technical Learning, Get Curious

How to choose a Thermocouple There are different types of thermocouples and their applications may vary. An exposed thermocouple will work best when high response times are required, but an ungrounded thermocouple is better in corrosive environments

Getaggt als:Product Info, Get Curious

How to Choose Between a RTD PT100 vs Pt1000? The sensing elements in Resistance Temperature Detectors (RTD’s) can be categorized in terms of the type of metal out of which they’re made and their resistance at a benchmark temperature.

Getaggt als:Product Info, Get Curious

Types of RTDs Resistance Temperature Detectors (RTDs) available today can generally be categorized into one of two basic types of RTDs, depending on how their temperature sensing element is constructed.

Getaggt als:Product Info, Get Curious

How to Use Ferrite Cores with Instrumentation OMEGA’s thermocouple and RTD connectors with built-in nickel-zinc ferrite cores are used where it is desired to suppress electro-magnetic, interference commonly known as EMI.

Getaggt als:Technical Learning, Get Going

Practical Guidelines for Temperature Measurement Temperature can be measured via a diverse array of sensors. All of them infer temperature by sensing some change in a physical characteristic.

Getaggt als:Technical Learning, Get Curious

Pt100 Probes Probes may be terminated in a connection head, quick disconnect, terminal block, or extension wire. OMEGA’s standard terminations are pictured on product pages.

Getaggt als:Technical Learning, Get Curious

Resistance Elements and RTD’s Resistance elements come in many types conforming to different standards, capable of different temperature ranges, with various sizes and accuracies available.

Getaggt als:Technical Learning, Get Curious

Flow Meter Tutorial So you want to measure flow? The answer would seem to be to purchase a flowmeter.

Getaggt als:Technical Learning, Get Curious

Electronic Halogen Leak Detector For many years the most effective, and only, method for finding gas leaks of any type was the use of a soap or bubble solution.

Getaggt als:Technical Learning, Get Curious

Industrial pH Monitoring: pH and pH Electrode Basics pH electrode technology hasn't changed much in the past 50 to 60 years, yet pH electrode manufacturing remains an art.

Getaggt als:Technical Learning, Get Curious

Ion Selective Electrodes This article is designed to apply, in general, to all specific ion electrodes.

Getaggt als:Technical Learning, Get Curious

What is a Low Pass Filter? A low pass filter is placed on the signal wires between a signal and an A/D board

Getaggt als:Technical Learning, Get Curious

Infrared Quick Help When to Use Infrared Temperature Measurement

Getaggt als:Technical Learning, Get Curious

Choosing the Right Temperature Transmitter for Your Application

Getaggt als:Technical Learning, Get Curious

Contact Closure Inputs: Connect Digital Input & Output DAQ Board Many times it is necessary to monitor a contact closure using a PC. Some applications include monitoring a relay closure on a machine to record on-off times, or simply as an alarm to notify someone of an open freezer door.

Getaggt als:Technical Learning, Get Curious

Scaling Voltage & Current to Engineering Units It is very often necessary to convert a voltage, millivot or current reading into a more useful value such as PSI, GPM, LBS, etc.

Getaggt als:Technical Learning, Get Curious

Troubleshooting Thermocouple Input Devices Noise is unavoidable in PC based data acquisition systems. There is board induced noise which can be measured by shorting an analog input to ground and taking a series of readings and plotting them in a histogram.

Getaggt als:Technical Learning, Get Going

What is the Load Cell Calibration Procedure for Weighing Applications? Inspect the load cell cables, and coil and protect any excess. The load should be equally distributed among multiple load cells of multiple load cell installations.

Getaggt als:Technical Learning, Get Going

Infrared pyrometers Pyrometer is derived from the Greek root pyro, meaning fire. The term pyrometer was originally used to denote a device capable of measuring temperatures of objects above incandescence, objects bright to the human eye.

Getaggt als:Technical Learning, Get Curious

Mechanical Flow meters Discussed in this chapter are various types of mechanical flow meters that measure flow using an arrangement of moving parts,

Getaggt als:Technical Learning, Get Curious

Differential Pressure Flow meters The calculation of fluid flow rate by reading the pressure loss across a pipe restriction is perhaps the most commonly used flow measurement technique in industrial applications

Getaggt als:Technical Learning, Get Curious

Overview of GPIB protocol IEEE-488 refers to the Institute of Electrical and Electronics Engineers (IEEE) Standard number 488 and is commonly called GPIB (General Purpose Interface Bus).

Getaggt als:Technical Learning, Get Curious

RF/Capacitance Level Instrumentation Capacitance level detectors are also referred to as radio frequency (RF) or admittance level sensors. They operate in the low MHz radio frequency range, measuring admittance of an alternating current (ac) circuit that varies with level.

Getaggt als:Technical Learning, Get Curious

All About Flow Meters Measuring the flow of liquids is a critical need in many industrial plants.

Getaggt als:Technical Learning, Get Curious

What is a Variable Area Flow Meter? Variable area flow meters are simple and versatile devices that operate at a relatively constant pressure drop and measure the flow of liquids, gases, and steam.

Getaggt als:Technical Learning, Get Curious

Plug-in Cards Although the microprocessor and digital network technologies have fundamentally reinvented the ways in which today's data acquisition systems handle data

Getaggt als:Technical Learning, Get Curious

An Introduction to Venturi Flow Meters, Flow Nozzles, and Segmental Wedge Elements Venturi tubes are available in sizes up to 7 inches and can pass 25 to 50% more flow than an orifice with the same pressure drop

Getaggt als:Technical Learning, Get Curious

Pressure sensor Piezoelectric presssure sensors can further be classified according to whether the crystal's electrostatic charge, its resistivity, or its resonant frequency electrostatic charge is measured.

Getaggt als:Technical Learning, Get Curious

Strain Gauge When external forces are applied to a stationary object, stress and strain are the result.

Getaggt als:Technical Learning, Get Curious

The RS-232 protocol Information being transferred between data processing equipment and peripherals is in the form of digital data which is transmitted in either a serial or parallel mode.

Getaggt als:Technical Learning, Get Curious

What is an Orifice Plate Flow Meter? The orifice plate flow meter is commonly used in clean liquid, gas, and steam services. It is available for all pipe sizes but it is very cost-effective for measuring flows in larger ones (over 6 inches diameter).

Getaggt als:Technical Learning, Get Curious

An Introduction to Pitot Tubes Although the pitot tube is one of the simplest flow sensors, it is used in a wide range of flow measurement applications such as air speed in racing cars and Air Force fighter jets

Getaggt als:Technical Learning, Get Curious

What is a thermography? Thermography extends the concept of point radiation thermometry to one-dimensional profiles or two-dimensional pictures of non-contact temperature data.

Getaggt als:Technical Learning, Get Curious

Strain Gage Technical Data The most universal measuring device for the electrical measurement of mechanical quantities is the strain gage.

Getaggt als:Technical Learning, Get Curious

Non-contact thermometers Historically a radiation non-contact thermometer consisted of an optical system to collect the energy emitted by the target;

Getaggt als:Technical Learning, Get Curious

RS485, RS422 and RS232 Why use RS232 vs RS485 and what is the real difference between RS422 Vs RS485? First, lets define each one. Keep in mind that all three are considered SERIAL, as opposed to IEEE-488 which is PARALLEL.

Getaggt als:Technical Learning, Get Curious

Electronic Flow meters While the flow measurement technologies discussed in this chapter--magnetic, vortex, and ultrasonic--are neither exclusively nor exhaustively electronic in nature, they do represent a logical grouping of flow measurement technologies.

Getaggt als:Technical Learning, Get Inspired

Working principle of thermocouples A typicial thermocouple is made up of two dissimilar metals joined together to form two junctions.

Getaggt als:Product Info, Get Curious

Monitoring Juice Level in a Vessel using Transmitters and Transducers The Role of Flow and Level Transmitters and Pressure Transducers in the Monitoring of Juice Level in a Vessel

Getaggt als:Case Study, Get Going

Wireless Signals & Faraday Cages in Temperature Measurement Whether you want roses in January or fresh salmon in August, a temperature-controlled supply chain...

Getaggt als:Technical Learning, Get Going

Preventing Explosions with FM Approved Intrinsically Safe Instrumentation Industrial explosions have caused devastating loss of life on many occasions.

Getaggt als:Technical Learning, Get Curious

Optimizing Strain Gage Performance for Inhomogeneous Materials How to use strain gages and optimize their performance while working with inhomogeneous materials

Getaggt als:Technical Learning, Get Going

Particle Pollution & Environmental Safety Indoor air quality is the responsibility of building owners, managers and employers.

Getaggt als:Technical Learning, Get Curious

5 Reasons to Wirelessly Measure Relative Humidity Monitoring Relative Humidity in Lab can be challenging. Choose the most simple and powerful way by using wireless transmitters.

Getaggt als:Technical Learning, Get Curious

How Rutgers Food Innovation Center Used Automation to Boost Food Quality and Save Time We definitely don’t want to go back to the way we were doing it. It was too much work and didn’t pay off. –Steve Baughman, Senior Maintenance Mechanic for Rutgers Food Innovation Center

Getaggt als:Case Study, Get Inspired

Sensors Play a Vital Role in Commercial Space Mission Success Sensors and accessories are the central nervous system of launch vehicles, payloads and support systems.

Getaggt als:Case Study, Get Inspired

Applying Ultrasonic Level Sensors in Cooling Tower Water Basins Cooling towers are heat exchange systems that require precision sensors to ensure water basin liquid levels are monitored.

Getaggt als:Technical Learning, Get Going

Shaping the Future of Rotational Molding with Wireless Temperature Monitoring Wireless sensor system successfully improves process control for roto-molding machine manufacturer.

Getaggt als:Case Study, Get Inspired

Just How Strong is a Python, Anyway? Our engineers help design a system that will figure out just how much deadly force a python really has.

Getaggt als:Case Study, Get Inspired

OMEGA Has a Starring Role in the LSST Telescope Mirror The Large Synoptic Survey Telescope (LSST) is a new kind of optical telescope that will view a wider area of night sky than ever before possible. Once operational...

Getaggt als:Case Study, Get Curious

Wireless Monitoring Solution Keeps Fruit Quality High and Energy Costs Low Discover how a wireless temperature monitoring system can provide a more precise and cost-effective way to cool produce.

Getaggt als:Case Study, Get Inspired

5 Ways the Right Expertise Can Simplify the Customization Process Pressure transducers and load cells play a critical role in ensuring the safety, reliability, and accuracy of products and processes across a wide variety of industries—including aerospace, mining, manufacturing, technology, and more.

Getaggt als:Technical Learning, Get Inspired

Hybrid Ultrasonic Flow Meter Application Helps Ensure Accurate Enzyme Injection Learn how flow meters helped an Oil company achieve accurate measurements of the water flow rate and total flow.

Getaggt als:Case Study, Get Going

Load Cell Customization A Small, But Critical Component in the World’s Brightest X-Ray Laser By modifying its standard load cells, OMEGA helps keep novel laser project on track for completion in 2018.

Getaggt als:Case Study, Get Inspired

Turning up the heat: 12 MI thermocouple probes get tested in extreme conditions In an intense heat environment, such as in solid waste incinerators, sintering powdered metals, or gas or oil fired-furnaces, you need a thermocouple probe that can withstand extreme heat.

Getaggt als:Case Study, Get Going

Infrared Temperature Measurement Theory and Application Infrared thermometers for non-contact temperature measurement are highly developed sensors which have wide-spread application in...

Getaggt als:Technical Learning, Get Curious

Measuring pH with a Wireless Device: 3 Must-Have Features Ready to measure pH with a Wireless Device? This is what you should be looking for in a portable data logger for pH measurement.

Getaggt als:Technical Learning, Get Going

What are Nanosensors? How and Where are They Used? While few engineers need to work at the nano scale, temperature measurement with compact thermocouples is applicable across many fields.

Getaggt als:Technical Learning, Get Curious

Flow Measurement in a Return Activated Sludge Line Keene Waste Water Treatment Plant uses a secondary treatment process called activated sludge, a process which converts non-settable substances into a biological floc

Getaggt als:Technical Learning, Get Going

Differentiating State, Event and Pulse Data Loggers and Defining Applications Data loggers are instruments that monitor and record changes in conditions over time.

Getaggt als:Technical Learning, Get Curious

Sensor Theory of Operation Omega is a reliable source for pressure transducers and load cells that provide high quality data in a myriad of processes.

Getaggt als:Technical Learning, Get Curious

Custom Pressure Transducers A custom pressure transducer is a transducer that converts pressure into an analog electrical signal, often manufactured with the exact specifications required for an application.

Getaggt als:Case Study, Get Curious

What is MI Cable? The basic construction provides high-temperature capability, exceptional electrical isolation, and physical protection for the conductors especially when subjected to harsh environments.

Getaggt als:Technical Learning, Get Curious

The importance of wind tunnel testing in the lab Failure rates for many electronic components rise with temperature.

Getaggt als:Technical Learning, Get Curious

High Temperature Pressure Transducers vs. Cooling Elements Pressure measurement is often a challenging task due to the harsh environments frequently found in industrial manufacturing.

Getaggt als:Technical Learning, Get Curious

Sanitary Sensors A Sanitary Sensor is a device which measures temperature, flow or pressure in an environment where products will be for human consumption.

Getaggt als:Product Info, Get Curious

Temperature Measurement in Electromagnetic Environments One of the easiest ways to measure and record temperature is with a thermocouple. Thermocouples perform reliably in most environments, tolerating temperature extremes, vibration and even ionizing radiation.

Getaggt als:Technical Learning, Get Curious

Strain Gage Application Requires Quality Control Surface Preparation and Application Steps OMEGA Engineering offers four types of strain gages: The Karma Grid or K-Series, Precision Strain Gages, Pre-Wired Gages, Transducer Quality.

Getaggt als:Technical Learning, Get Going

M12 Temperature Sensors Temperature sensors provide an input to a system (indicator, controller or other device) that is used to determine the temperature of a specific process or location.

Getaggt als:Product Info, Get Curious

Doppler vs Transit Time Ultrasonic Flow Meters Ultrasonic flow meters are non-intrusive devices that use acoustic vibrations to measure the flow rate of liquid...

Getaggt als:Technical Learning, Get Curious

Types of Load Cells Various load cell types are preferred, relative to the needs of the laboratory or operational environment.

Getaggt als:Technical Learning, Get Curious

A Brief History of the Temperature Sensor The sensations of hot and cold are fundamental to the human experience, yet finding ways to measure temperature has challenged many great minds.

Getaggt als:Technical Learning, Get Curious

Using Load Cells to Weigh Trucks, Trains, and Aircraft In the airline industry, weight is money. Every additional pound requires more fuel to lift, so making sure there’s enough gas in the tanks means knowing what the aircraft weighs.

Getaggt als:Technical Learning, Get Going

Calibrator A calibrator is an equipment used to adjust an instrument accuracy, often associated with a specific application.

Getaggt als:Product Info, Get Curious

What is a Thermal Mass Flow Meter? Thermal mass flow meters measure the mass flowrate of gases and liquids directly.

Getaggt als:Technical Learning, Get Curious

Understanding How Vibration Affects RTDs & Thermocouples Challenges presented to temperature measurements in the presence of vibration

Getaggt als:Technical Learning, Get Curious

Measuring Temperatures in Furnaces with Oxidizing Atmospheres Measuring temperatures inside a furnace can present several challenges: high temperatures, temperature cycling, and hostile atmospheres exceeding the limits of many measurement devices while others have greatly reduced lifetimes and poor accuracy.

Getaggt als:Technical Learning, Get Going

Applications and Benefits of Mineral Insulated Cables in Critical Processes MI cable is a specialized type of cable used in high temperatures or harsh environmental conditions because it has low flammability, even when operating at high temperatures. It resists oxidation and enables precise measurement.

Getaggt als:Technical Learning, Get Curious

Cryogenic Temperature Sensors Cryogenics is the branch of physics that deals with the production and effects of very low temperatures.

Getaggt als:Product Info, Get Curious

Wireless Sensors Wireless sensors are standard measurement tools equipped with transmitters to convert signals from process control instruments into a radio transmission.

Getaggt als:Product Info, Get Curious

Installing Load Cells Each load cell installation is unique. Consult a structural engineer when your application requires very high accuracy, long-term stability, custom specifications, or when using in a varied R&D environment.

Getaggt als:Technical Learning, Get Going

Thermowell Characteristics and Selection Criteria Thermowells are used to guard temperature sensors such as thermocouples, thermistors and bimetal thermometers against damage from excessive pressure, material velocity and corrosion

Getaggt als:Technical Learning, Get Curious

IC Sensors An IC Temperature Sensor is a two terminal integrated circuit temperature transducer that produces an output current proportional to absolute temperature. The sensor package is small with a low thermal mass and a fast response time

Getaggt als:Product Info, Get Curious

Data Acquisition In the simplest form, a technician logging the temperature of an oven on a piece of paper is performing data acquisition.

Getaggt als:Product Info, Get Curious

Lessons about Positive Displacement Flow Meters Positive Displacement flow meters are the only flow measuring technology to directly measure the volume of fluid that passes though the flow meter.

Getaggt als:Technical Learning, Get Curious

How Bright is it? Shining a light on intensity measurement Human vision depends on light. Light reflects off surfaces into the eyes, passing through the cornea and pupil to form an image on the retina.

Getaggt als:Technical Learning, Get Curious

Infrared Thermometer On its most basic design an infrared thermometer consists of a lens to focus the infrared (IR) energy on to a detector.

Getaggt als:Product Info, Get Curious

Accurate Airflow Measurement Calculating flow rates through ducts, pipes, hoods and stacks (collectively called ducts for our purposes), has never been difficult.

Getaggt als:Technical Learning, Get Curious

Chart Recorders A chart recorder is an instrument used to record various process and electrical signals.

Getaggt als:Product Info, Get Curious

What Is A Pressure Transducer? A pressure transducer, often called a pressure transmitter, is a transducer that converts pressure into an analog electrical signal. Although there are various types of pressure transducers, one of the most common is the strain-gage base transducer.

Getaggt als:Product Info, Get Curious

What is an Ultrasonic Flow Meter? An ultrasonic flow meter (non-intrusive Doppler flow meter) is a volumetric flow meter which requires particulates or bubbles in the flow.

Getaggt als:Product Info, Get Curious

All About Thermistors A thermistor is an element with an electrical resistance that changes in response to temperature.

Getaggt als:Product Info, Get Curious

What are Anemometers? An anemometer is an instrument used to measure the speed or velocity of gases either in a contained flow, such as airflow in a duct, or in unconfined flows, such as atmospheric wind.

Getaggt als:Product Info, Get Curious

What is an Accelerometer? An accelerometer is a device that measures the vibration, or acceleration of motion of a structure.

Getaggt als:Product Info, Get Curious

An Introduction to pH Meters A pH meter is an instrument used to measure acidity or alkalinity of a solution - also know as pH.

Getaggt als:Case Study, Get Curious

What is an Intrinsically Safe Product? Fire is a hazard in many industries. Sometimes the risk is quite evident, as when flammable gasses...

Getaggt als:Technical Learning, Get Curious

What are Data Loggers? Gain valuable insights into the function and importance of data loggers. Learn about the different types—temperature, humidity, and pressure loggers—and how they improve monitoring accuracy, regulatory compliance, and data-driven decision-making across a wide range of industrial and commercial environments.

Getaggt als:Product Info, Get Curious

An Introduction to Level Measurement Integral to process control in many industries, level measurement sensors fall into two main types. Point level measurement sensors are used to mark a single discrete liquid height–a preset level condition.

Getaggt als:Product Info, Get Curious