Boîtier de contrôle

OM-AMU series fiberglass enclosures designed to insulate & protect electrical controls, components in both indoor/outdoor applications & high. temp. & corrosive environments.

SCE-ELST Series 304 SS electrical enclosures designed to house electrical, electronic controls, instruments, equipment that are wash down or are used in very wet conditions.

SCE-NLP Series electrical enclosures designed to house electrical controls, instruments and components in areas that do not require oil, water and dust tight protection.

The EK Series polycarbonate enclosures are a unique design to house and protect standard IEC components,

NEMA type 4 electrical enclosures and cabinets can be uses indoors or outdoors.

The SCE-4EL series electrical enclosures and cabinets are designed to house electrical and electronic controls, instruments and components.

SEC-ELJSS Series electrical enclosures designed to house electrical controls, instruments & components in areas, which are regularly hosed down or are wet or oily conditions.

These front panels are 2 mm (0.090') thick aluminum and are pre-cut for up to three DIN size controllers, depending on the size of the enclosure.

The EK Series polycarbonate enclosures are a unique design to house and protect standard IEC components

SCE-LP series of electrical enclosures & cabinets designed to house electrical, electronic controls, instruments, components. Provides protection from dust, dirt, oil & water.

AMHS Series hole plugs are used in plugging existing unwanted holes in electrical enclosures for standard hole sizes for pilot lights, push buttons and conduit fittings.

The SCE-SCR Series electrical enclosures are designed for use as electrical junction boxes, terminal wiring boxes, instrument housings, and electrical control enclosures.

Pressure differentials in enclosures with a high degree of protection with respect to humidity and dust are a result of inside and outside temperature fluctuations.

AMP Series polycarbonate enclosures designed to insulate & protect electrical controls and components in both indoor and outdoor applications.

OM-AMPB Series non-metallic fiberglass pushbutton enclosures are designed to insulate and protect electrical controls and components in both indoor and outdoor applications

Enclosure Door Latch Handles, Knobs and Key Latches

Designed to house electrical controls, instrument, components that require viewing of the gauges/controls that are regularly hosed down or are very wet or oily conditions.

These connection kit are necessary so the user can connect power supplied to the heat trace product, provide sealing for the heating cable & terminate the cable connections.

Designed to offer protection for all standard brands of oil-tight pushbuttons, switches, and pilot lights where slanted surfaces are desired.

Designed to offer protection for all standard brands of oil-tight pushbuttons, switches, and pilot lights where slanted surfaces are desired.