Singapore 1800 622 1156 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
Series-636
Fixed Range Pressure Transmitter, SS, ± 0.30% Accuracy, Explosion-Proof
- 긴 사용 수명과 낮은 유지보수 비용으로 총 소유 비용 절감
- 공정 및 인원 보호가 필요한 용도에 적합한 방폭 하우징
Series-636
From
TWD
40,936
Product Overview
- 정확도 ± 0.3%
- 정확도 세부 사항 ± 0.30% 보정 범위의 25 °C(77 °F) 및 12 Vdc 인가 시 선형성, 히스테리시스 및 반복성(BFSL) 포함
- 응용 분야 석유 및 가스
- 최대 보상 온도 180 °F
- 최소 보상 온도 -20 °F
- 규정 준수 노트 FM 및 CSA 승인 폭발 방지, Class I, Division 1, 그룹 B, C, D, Class II 그룹 E, F, G, Class III용
- 전기 연결 케이블 포함 3/4인치 NPT 암나사 컨듀잇
- 전기 출력 4 ~ 20 mA
- 외함 등급 IP56, NEMA 타입 4
- 충전 유체 DC 200 실리콘 오일
- 루프 저항 900 Ω 최대 @ 30 V
- 접액부 재질 316L 스테인리스 스틸
- 미디어 호환성 깨끗한 건조 공기 / 불활성 가스, 정제 공정 / 냉각수, HVAC / 실내 공기, 비활성 가스/비반응성 가스, 오일 / 윤활제, 유기 용매
- 작동 온도, 최대 140 °F
- 최소 작동 온도 -40 °F
- 출력 세부 정보 4~20 mA DC, 30 mA DC로 제한
- 출력 신호 현재
- 압력 유형 궤간
- 프로세스 연결 크기 1/2인치
- 프로세스 연결 유형 NPT 암나사
- 공정 온도, 최대 212 °F
- 최소 공정 온도 -40 °F
- 증명압 Up to 45 psi
- 시리즈 ID Series-636
- 스팬 조정 ± 0.16 mA
- 안정성 상한 범위의 ±0.5% (6개월간)
- 공급 전력 참고 12-30 Vdc (636), 8-14 Vdc (636LP), 역극성 보호
- 전원 유형 DC
- 공급 전압 12 ~ 30Vdc
- 열 효과 ± 2.0%/50 °F (영점 및 스팬 포함). -20~180 °F(-29~82 °C) 범위. 50 °F(28 °C)당 ± 2.0%.
- 무게 374 g
- 와이어 게이지 22 AWG
- 제로 설정 조절 범위 ± 0.32 mA
Supported Applications
The Series 636 Fixed Range Pressure Transmitter is a low-cost, fixed-range, all stainless steel transmitter that converts liquid, gas or vapor pressure into a 4-20 mA DC output (or 1-5 VDC on the 636LP). All 316L SS construction makes it compatible with most corrosive media, and it is designed to continuously measure pressure for years even in tough environmental and media conditions.
- Continuous pressure measurement of liquid, gas or vapor
- Corrosive-media service using 316L SS wetted parts
- Explosion-proof, offshore and hazardous-location installations
The transmitter is FM and CSA approved explosion-proof for Class I, Division 1, Groups B, C and D; Class II, Groups E, F and G; and Class III, and it meets NACE standards for offshore applications. It is weatherproof with a NEMA 4 (IP56) enclosure rating.
Operating Conditions & Performance
Accuracy is ±0.30% of calibrated span including linearity, hysteresis and repeatability (BFSL) at 25°C (77°F) and 12 VDC excitation, with stability of ±0.5% of upper range limit for six months. Pressure limits are 300% of the upper range limit.
- Output signal: 4-20 mA DC, limited to 30 mA DC (636); 1-5 VDC (636LP).
- Power: 12-30 VDC (636), 8-14 VDC (636LP), with reverse polarity protection.
- Loop resistance: 900 Ω max @ 30 V.
- Process temperature: -40 to 100°C.
- Ambient (electronics) temperature: -40 to 60°C.
- Compensated temperature range: -29 to 82°C, with a thermal effect of ±2.0% per 50°F (28°C).
Zero and span adjustments are Null 4.0 mA ±2% span and Span 16.0 mA ±1% span on the 636 (1 VDC and 4 VDC on the 636LP). The process connection is 1/2" female NPT and the electrical connection is a 3/4" female NPT with a 24" (61 cm), 22 AWG lead. The fill fluid is DC 200 silicone and the transmitter weighs 0.83 lb (374 g).
Configuration Options
Models differ by fixed pressure range and by output type, so the transmitter can be selected for the exact span and signal the loop requires.
- Fixed range: each model is factory-set to one span, from 0 to 1 bar up to 0 to 20 bar.
- Output type: the standard 636 provides a 4-20 mA DC signal, while the 636LP provides a 1-5 VDC signal and runs on 8-14 VDC.
The NISTCAL-PT1 option adds a NIST traceable calibration certificate to any model.
Key Product Differences
The model number is 636-<model>. The defined fixed ranges, all with a 4-20 mA output, are:
- 636-0 is factory-set to a span of 0 to 1 bar.
- 636-1 is factory-set to a span of 0 to 2 bar.
- 636-2 is factory-set to a span of 0 to 7 bar.
- 636-3 is factory-set to a span of 0 to 20 bar.
Additional fixed-range models 636-4, 636-6 and 636-7 complete the lineup, and the 636LP provides the low-power 1-5 VDC output option.
PDFs & Manuals
Accessories
Static Pressure Sensors for Manometers & Gages across Air Filters
From SGD10.49
0 In Stock