France 0805 541 038 | Intl +31 01 57 32 48 17 | Bienvenue sur notre nouveau site web! Vous avez rencontré un problème ou un bug ? Veuillez le signaler ici.
IN-UVI
Wheatstone Bridge In-Line Amplifier
Choisir une variante
Output Signal
Ajouté à votre panier
Configuration complète.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer pour recommencer
Spécifications du produit
<< Voir tous les modèles de produit| Marque |
 |
| Approvals | CE |
| Bridge Resistance | 350 to 5000 Ω |
| Calibration Note | Field Installed Shunt Calibration resistor with remote activation for bridge calibration |
| Capacitance | 0.022 µF |
| EMC | <0.15% of FS per EN61326-1 (industrial) |
| Electrical Output | 4 to 20 mA, ± 5 V, ± 10 V @ 2 mA |
| Enclosure Ratings | IP65 |
| GrossWeightValue | 0.15 |
| Height | 34.8 mm |
| Input Noise | 10 mV peak to peak @ 3 mV/V voltage mode (10 Vdc) 20 uA peak to peak current mode |
| Input Range | 90 mA, 0.5 mV/V to 4 mV/V in 0.5 steps |
| Input Range Note | Current: 90 mA maximum (must be capable of supplying 200 mA), Sensor Input: 0.5 mV/V to 4 mV/V in 0.5 steps |
| Input Type | Current, Signal |
| Isolation | 100 MΩ @ 500 Vdc |
| Length | 134.8 mm |
| Linearity | 0.0001 |
| Load Resistance | 700 Ω at 20 mA |
| Long Term Stability | 0.1% of FS/year |
| Operating Temperature, Max | 60 °C |
| Operating Temperature, Min | -20 °C |
| Output Detail | Current: 4 to 20 mA, 12 mA zero ± 8 mA outputs field programmable, Voltage: ± 5 volts, ± 10 volts at 2 mA maximum |
| Output Resistance | 60 Ω |
| Output Signal | Current, Voltage |
| Protection | Short Circuit Protection: Yes +output to -output |
| Response Time | 200 µs |
| Response Time Note | 200 µs (0 to 63%) |
| Sensitivity | Bridge : 1 to 8 mV/V @ 5 Vdc EXC, 0.5 to 4 mV/V for 10 Vdc EXC |
| Sensor Excitation | 5 or 10 Vdc field programmable; 30 mA @ 10 Vdc |
| Series ID | IN-UVI-Bridge-Amplifier |
| Span Adjustment | ± 20 % fine ± 40 % coarse |
| Supply Power | 22 to 32 Vdc |
| Supply Power Note | 22 to 32 Vdc isolated from output |
| Supply Power Type | DC |
| Thermal Span Effect | 0.0025%/°F |
| Thermal Zero Effect | 0.001%/°F |
| Trim Pot Access | Behind connector endcaps |
| Width | 31.2 mm |
| Zero Setting Adjustable Range | ± 30% |
| Pays d'origine | Spain |
| Voir toutes les spécifications | |
PDF & Manuels