FMG72B-A

Electromagnetic Low Flow Meter

Click and hold to zoom

Process Connection Type

NPT Male BSPP Male

Output Signal

Current

Volumetric Flow Rate, Max

15.85 GPM

SGD3,870.53 / each

Item# FMG72B-A

Added to Your Shopping Cart

In Stock

Lead Time (If not in stock): 6 weeks

Brand
Accuracy	± 1.5 %
Accuracy Detail	± 1.5% of reading ± 0.3% range
Conductivity	50 µS/cm
Current, Max	26_ma_approx
Electrical Connection	M12 4 pin Female
Enclosure Ratings	IP65, NEMA Type 4X
Flange Diameter	0.39 in
Flow Indication	LED Green
Flow Indication Note	flow proportional blinking
GrossWeightValue	0.15
Load Resistance	250 Ω
Materials	PEEK, Aluminum
Materials, Wetted	EPDM, Stainless Steel
Media Compatibility	Conductive liquids, Corrosive chemicals / acids / bases, Saltwater / brines
Number of Outputs	1
Operating Pressure, Max	232 psi
Operating Temperature, Max	70 °C
Operating Temperature, Min	5 °C
Output Detail	Amplified Square Wave
Output Pulse Rate Note	Square wave signal NPN, internal pull-up resistor 2 kΩ pulse duty ratio 50:50
Output Signal	Current
Power Consumption	150 mA
Process Connection Size	1/2 in
Process Connection Type	NPT Male
Process Temperature, Max	90 °C
Process Temperature, Min	0 °C
Repeatability	± 1%
Response Time	< 500 ms
Sensor Diameter	0.375 in
Series ID	FMG70B-Series
Short-Circuit Protected	< 30 V
Short-Circuit Protected Note	Measures short-circuit proof (up to 30V) and polarity protection (up to -30V)
Supply Power Note	24 Vdc ± 10%
Supply Power Type	DC
Supply Voltage	24 Vdc
Volumetric Flow Rate, Max	15.85 GPM
Volumetric Flow Rate, Min	0.26 GPM
Country of Origin	Germany
See All Specs Show Less