Singapore 1800 622 1156 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
OS801A-USB
Infrared Temperature Transmitter with 4-20 mA and MODBUS over USB outputs
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Applications | General Purpose |
| Cable Length | 1 m |
| Cooling | N/A |
| Data Interface | USB |
| Data Interface Note | USB 2.0 (removable USB cable and software included) using the Modbus protocol |
| Display | No |
| Emissivity, Max | 1 |
| Emissivity, Min | 0.1 |
| Enclosure Ratings | IP65 |
| Field of View Note | Close-focus optics (focal spot size 7.5 mm at 500mm distance) |
| Field of view | Close Focus |
| GrossWeightValue | 0.73 |
| Housing Material | Stainless Steel |
| Impedance | 900 Ω |
| Intrisically Safe | No |
| Laser Output | false |
| Operating Temperature, Max | 70 °C |
| Operating Temperature, Min | 0 °C |
| Optics | 801A |
| Output Detail | 0 to 20mA, 4 to 20mA, 0 to 10V; 2-wire, 4-20 mA, linear with measured temperature |
| Output Signal | Current, Voltage |
| Process Temperature, Max | 1000 °C |
| Process Temperature, Min | -40 °C |
| Relative Humidity Note | 95% max. non-condensing |
| Relative Humidity, Max | 0.95 |
| Repeatability | ± 0.5°C |
| Repeatability Note | ± 0.5°C or 0.5% of readi ng, whichever is greater |
| Response Time | 200 ms |
| Sensing head Mounting | 20 mm |
| Sensor Voltage | 6 Vdc |
| Series ID | OS-TX-USB-Series |
| Span, Max | Full temperture Range |
| Span, Min | 100 °C |
| Spectral Response, Max | 5 μm |
| Supply Voltage | 24 to 28 Vdc |
| Temperature Range | N/A |
| USB Cable Length | 1.8 m |
| Weight | 155 g |
| field-of-view | Close Focus |
| Country of Origin | United Kingdom |
| See All Specs | |
PDFs & Manuals
Software & Drivers
Accessories
Le collier de purge d'air est utilisé pour éloigner la poussière, les fumées, l'humidité et autres contaminants de la lentille. L'air entre par le raccord latéral et sort par l'ouverture à l'avant.
C$188.50 / each
0 In Stock
Le support de montage fixe en forme de L offre un support rigide pour le capteur et permet un réglage fin de la rotation autour d’un axe.
C$36.25 / each
0 In Stock
L’outil de visée laser montre précisément où le capteur est dirigé. Une fois centré sur la cible, l’outil de visée laser peut être retiré.
C$747.39 / each
0 In Stock