Singapore 1800 622 1156 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
CT7100
Single and Dual Pen Circular Recorder with Digital Display
Choose a Variant
Recording Color
Supply Voltage
Number of Relays
Control Output
Material Construction Option
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Approvisionnement Remarque | 115 Vac ±10%, 50/60 Hz |
| Autonomie de la batterie | up to 5 yr |
| Bande morte | Recording: 0.3% |
| CMRR | 90 dB minimum; 24 Vac maximum for RTD input; 15 Vac maximum for other inputs |
| Consommation électrique | 25 VA |
| Control Output | N/A |
| Couleur d'enregistrement | Pen 1: Red |
| Diamètre du graphique | 254 mm |
| Dimensions de la découpe | 321 x 343 mm |
| Détection de rupture du capteur | Sensor Fault Detection: Displays “Hi” or “Lo” process input (10% above or below range) and sensor break “SnSr”; pen action on error condition is user configurable to 0 or 100% of chart span; on/off outputs go “off”; proportional outputs go to user-defined value from 0 to 100% |
| Filtre | 1 to 20 Scans |
| Fréquence d'échantillonnage | 1 Scan/sec |
| Hauteur | 335 mm |
| Humidité relative | 0 to 90% RH, non-condensing |
| ID de série | CT7000-Series |
| Indicateurs LED | LED indicates Out 1, Out 2, Man, Ramp, Soak, Seg 1 through Seg 6, process units as applicable |
| Largeur | 384 mm |
| Limites d'erreur standard | Error Limit: Measurement Error Limit: Thermocouple Types J, K, T, E, N and RTD: ±0.25% of reading + 1° @ 25°C (77°F); Type R, S, B, C Thermocouples: ±0.25% of span @ 25°C (77°F); mVdc and Vdc: ±0.25% of scaled span plus 1 least-significant digit Ambient Temperature Error Limit: 0.01% of span per °C (1.8°F) deviation from 25°C (77°F) Process Value Output Error Limit: ±0.5% of span Record Error Limit: ±0.5% of chart span or better, typically; ±1.0% of chart span maximum; Calibration Shift: Self-compensating for ambient temperature; all calibration values are stored in memory; Process Value Output Error Limit: ±0.5%; Record Error Limit: ±0.5% |
| Longueur | 92 mm |
| Material Construction Option | Standard |
| Matériaux | Plexiglass |
| Modes d'alarme | Active High Output, Active Low Output, Adjustable |
| NMRR | 85 db @ 60 Hz or greater |
| Nombre de canaux | 1 |
| Nombre de relais | N/A |
| Norme CEM | IEC 61000-4-2 |
| Number of Relays | N/A |
| Option de code de câble | 2- or 3- Wire |
| Option de construction du matériau | Standard |
| Plage de mesure de la température | J: 0 to 760°C, K: 0 to 1360°C, T: -220 to 400°C, E: 0 to 750°C, N: 0 to 1300°C, R: 200 to 1650°C, S: 200 to 1650°C, B: 200 to 1800°C, C: 200 to 2300°C, RTD: -140 to 400°C |
| Plage de mesure de tension | 0 to 25 mV, 0 to 50 mV, 10 to 50 mV, 0 to 5 V, 1 to 5 V |
| Plage de mesure du courant | 4 to 20 mA |
| Poids | 9.1 kg |
| Puissance nominale du commutateur | 2 A @ 115 Vac, 1 A @ 230 Vac |
| Recording Color | Pen 1: Red |
| Remarque sur l'affichage | Digital Displays: 2 possible: 1 per installed pen; (4) 7-segment digits, 14 mm (0.56”) high, red LEDs, automatic (-) positioning, decimal point positioning Keypad: Located on front cover, tactile feedback membrane keys, Display/Record Filter: 1 to 20 Scans. Alarm Display: 2 alarm indications possible per pen; ALRM1 and ALRM2; red LEDs; single ALRM indication provided for controller pens |
| Remarque sur la plage de mesure | Thermocouple: J: 0 to 760°C, K: 0 to 1360°C, T: -220 to 400°C, E: 0 to 750°C, N: 0 to 1300°C, R: 200 to 1650°C, S: 200 to 1650°C, B: 200 to 1800°C, C: 200 to 2300°C RTD: -140 to 400°C Current: 4 to 20 mA Voltage: 0 to 25 mV, 0 to 50 mV, 10 to 50 mV, 0 to 5 V, 1 to 5 V |
| Remarque sur le graphique | Chart Span: Bottom and top of span, -9999 to 9999 units; Chart Drive: DC Stepper Motor; Chart Drive: Stepper Motor |
| Résolution | Pen Resolution: 0.15% |
| Sortie de commande | N/A |
| Supply Voltage | 115 Vac |
| Temps de réponse | 20 sec |
| Température de fonctionnement, max | 55 °C |
| Température de fonctionnement, min | 0 °C |
| Température de stockage, max | 65 °C |
| Température de stockage, min | -40 °C |
| Tension d'alimentation | 115 Vac |
| Type RTD | 100 Ω Pt sensor; α= 0.00385 |
| Type d'affichage | LED |
| Type d'approvisionnement électrique | AC |
| Type de commutateur | SPST |
| Type de mesure | Thermocouple, RTD, Current, Voltage |
| Type de stylo | Disposable Fiber tip |
| Type de thermocouple | J, K, T, E, N, R, S, B, C |
| Valeur brute du poids | 13.94 |
| Vibration | 0.5 to 100 Hz @ 0.2 g |
| Vitesse du graphique | 0.1 to 999.9 Hours |
| Country of Origin | United States |
| See All Specs | |
PDFs & Manuals
