India +91 8925807296 | Welcome to our new website, found an issue or bug? Please report it here
LCEB
Low Profile, Mini Beam Load Cell for Low Capacities
低容量用ロープロファイル・ミニビームロードセル
Models In Stock
- 非常に高精度
- 低プロファイル - 高さ1インチ
- 高い再現性
- 100%クリープ試験済み
LCEB
From
¥
61,326
Models In Stock
Product Overview
- ケーブル長 5 ft
- 校正オプション NIST
- 20分間のクリープ ± 0.15%
- 電気接続 ケーブル
- ヒステリシス ± 0.02%
- 入力抵抗 350 +50/-3.5 Ω
- ロードセルタイプ 曲げ梁
- 動作温度(最高) 90 °C
- 動作温度(最低) -55 °C
- 出力抵抗 350 ± 3.5 Ω
- 過負荷、最大 ± 400% FS
- プロセス温度(最高) 65 °C
- プロセス温度(最低) -15 °C
- 繰り返し精度 ± 0.01%
- 安全過負荷 150% FS
- シリーズID LCEB
- 電源注記 10 Vdc、最大15 Vdc
- 供給電圧 10から15 Vdc
- 熱スパン効果 ± 0.0008% FS/°F
- 熱ゼロ点効果 ± 0.0015% rdg/°F
- 配線/コネクタテーブル 緑: (+) 出力; 白: (-) 出力; 黒: (-) 入力; 赤: (+) 入力
- ゼロ点/バランス誤差 ± 1%
Supported Applications
The LCEB Series is a low-profile MiniBeam load cell offering exceptional accuracy in compression. With a 1" height, high repeatability and 100% creep testing, it is designed for controlled-environment measurement — in general, anywhere a digital readout is used — where small size, low creep and stable performance matter.
The cells span capacities from 5 lb (2.3 kgf) to 250 lb (114 kgf) and pair with compatible meters such as the DPIS, DP41-S and DP25B-S, making them a practical choice for test stands, laboratory force measurement and OEM weighing.
Operating Conditions & Performance
Accuracy is ±0.03% full scale, with repeatability of ±0.01% full scale and hysteresis of ±0.02% full scale. Rated output is 3 mV/V nominal.
Excitation is 10 Vdc (15V maximum) across a bridge resistance of 350 Ω ±3.5 Ω, with connection through a 1.5 m (5') 4-conductor shielded, color-coded cable. The aluminum-bodied cell operates over an ambient range of -55 to 90°C, and NIST-traceable calibration is included. The low-profile body stands 25.7 mm high with a 60.5 mm base length.
Configuration Options
The eight models differ almost entirely by rated capacity, from the 5 lb (2.3 kgf) LCEB-5 up to the 250 lb (114 kgf) LCEB-250. Every model shares the same electrical performance — ±0.03% full scale accuracy, 3 mV/V output and a 350 Ω bridge — so selection is driven by the force to be measured rather than by any change in signal behavior.
Physical size is likewise consistent: the lower-capacity models stand 25.7 mm tall, while the highest-capacity 250 lb (114 kgf) LCEB-250 is marginally taller at 25.9 mm.
Key Product Differences
- LCEB-5 — 5 lb (2.3 kgf) capacity
- LCEB-10 — 10 lb (4.5 kgf) capacity
- LCEB-25 — 25 lb (11 kgf) capacity
- LCEB-50 — 50 lb (23 kgf) capacity
- LCEB-75 — 75 lb (34 kgf) capacity
- LCEB-100 — 100 lb (45 kgf) capacity
- LCEB-150 — 150 lb (68 kgf) capacity
- LCEB-250 — 250 lb (114 kgf) capacity