Deutschland 07056-9398-0 | Internationale Rufnummer ++49 (0) 7056-9398-0 | Willkommen auf unserer neuen Website! Haben Sie einen Fehler oder ein Problem entdeckt? Bitte melden Sie es hier.
CDCN442-Controller
Toroidaler Leitfähigkeitsanalysator
Toroidal Conductivity Analyzer- Gehäuse NEMA 4X (IP68)
- 2 x 16-stellige LCD-Anzeige
- Montage in 51 mm (2') Rohr oder auf flacher Oberfläche oder Panel 144 x 144 x 100 mm DIN (5,7 x 5,7 x 4')
- Einfache Bedienung mit 3 Tasten
CDCN442-Controller
Von
SGD
2,263.67
Produktübersicht
- Zellkonstante 0,01, 0,1, 1 oder 5/10 cm-1
- Leitfähigkeitsmessung 10 mS/cm bis 1 S/cm
- Datenschnittstelle RS485
- Anzeigetyp 2 x 16-stelliges LCD-Display
- Gehäuse-Nennwerte IP68, NEMA Typ 4X
- Frequenz 50/60 Hz
- Impedanz 600 Ω
- Material ABS, Aluminium
- Anzahl der Relais 2
- Betriebstemperatur, max. 40 °C
- Betriebstemperatur, min. 5 °C
- Ausgangsdetails 4 bis 20 mA (2), Aufzeichnungs-Ausgang, Steuerungsausgang (4 bis 20 mA): kann als P + I + D Steuerung programmiert werden Optische galvanische Trennung: 2000 Vac
- Leistungsaufnahme 3,5 VA
- Prozesstemperatur, max. 0 °C
- Prozesstemperatur, min. 130 °C
- Relais Hinweis Ein-/Aus-Alarmausgänge (2): NO (1A / 240 Vac)
- Messbereich für Widerstandsfähigkeit 10 MΩ/cm bis unendlich
- Auflösung 0,1 oder 0,01
- Serien-ID CDCN442-Controller
- Gewicht 1.3 kg
Supported Applications
The Omega CDCN442 Toroidal Conductivity Analyzer is designed for industrial process monitoring of conductivity and concentration. The series utilizes a toroidal (electrodeless) sensor with a PVDF (Kynar) body, intended for mounting on 2" tubes, flat surfaces, or panels.
Operating Conditions & Performance
The analyzer operates within an ambient temperature range of 5 thru 40 °C and relative humidity from 20 thru 80%. The sensor supports a process temperature of 0 thru 100°C at atmospheric pressure, with a maximum operating pressure rating of 10 Kgf/cm² (@ 25°C). Measurement capabilities include conductivity ranges of 5 thru 2000 mS/cm and a sensor range of 10 mS thru 2 S. The unit features automatic temperature compensation from 0 thru 200 °C (others upon request) and provides galvanic isolation of 2000 VAC via opto coupler.
Key Performance Specifications
- Conductivity Range: 5 thru 2000 mS/cm
- Sensor Range: 10 mS thru 2 S
- Temperature Compensation: 0 thru 200 °C (Others upon request)
- Power Consumption: 3.5 VA
- Load Resistance: 1KOhm
Configuration Options
The CDCN442 series offers configurable output signals and control options to suit specific process needs.
Outputs & Control
- Analog Output: 4 - 20 mA with adjustable output range.
- Digital Communication: RS485 bilateral via software, supporting up to 36 equipment units located up to 2 Km apart.
- Control Actuation: Frequency Modulation and P+Di (Proportional + Differential).
- Set-Point Configuration: 1 independent set-point from 0 thru 100% of scale.
- Relay Output: 1 control ON-OFF output.
Housing & Construction
- Enclosure Rating: IP-68
- Casing Material: Cast Aluminum SAE 323 (BASE) with ABS Frontal Lid, finished in Electrostatic Epoxy Paint.
- Sensor Body Material: PVDF (Kynar)
- Process Connection: Threaded Point 2" (CIP and others upon request).
- Cable Inlet: Cable knockout 3/8" (4x locations).
Included Accessories
The equipment is supplied with installation hardware (2x), an Instruction Manual, and SS Clamps with nuts and washers.
Key Product Differences
The CDCN442 series integrates the analyzer/transmitter functions within a single cast aluminum housing. The sensor insertion length is specified as 100mm. While the standard configuration supports conductivity measurement, concentration ranges are available upon consultation of specific lists not included in this documentation summary.
PDFs & Handbücher
