Need assistance? Call us: 1-800-663-4209
PHE-6510B-Series
Submersible Flat Surface pH/ORP Electrodes
Models In Stock
- 16 Month Shelf Life
- CPVC or PVDF Construction
- Designed For Mounting in Tanks, Flumes, and Streams
- Easy Mounting in Tanks
PHE-6510B-Series
From
SGD
453.34
Models In Stock
Product Overview
- Cable Length 10 ft
- Diameter 0 mm
- Length 0 mm
- Mounting Orientation 45°
- Process Connection Size 1/2 in
- Process Connection Type NPT Male
- Sensor Type N/A
- Series ID PHE-6510B-Series
- Temperature Sensor Type N/A
Supported Applications
The Omega PHE-6510B Series consists of submersible flat surface pH/ORP electrodes designed for use in drums, open tanks, flumes, and streams. These sensors feature a flat sensing element surrounded by a porous polyethylene reference junction intended to minimize fouling.
Operating Conditions & Performance
The series supports process temperatures up to 87°C (190°F) for CPVC body construction and up to 100°C (212°F) for PVDF body construction. The electrodes utilize a flat sensing surface design with a porous HDPE junction.
Configuration Options
The PHE-6510B Series is available in multiple configurations defined by measurement type, material of construction, and special service options:
- Measurement Types: pH (PHE) or ORP (ORE).
- Housing Materials: CPVC or PVDF.
- Special Options: “-HF” for fluoride resistance, “-LC” for low conductivity applications, and “-GL” ground loop option available at additional cost.
Mechanical installation utilizes a ¼ turn quick disconnect. The cable assembly cap features a ½ MNPT thread to connect to a coupling and support pipe for mechanical mounting and cable protection. Automatic Temperature Compensation (ATC) is offered as part of the required mounting assembly, with sensor options including PT100 (100 Ω Pt RTD), PT1K (1000 Ω Pt RTD), TH700 Series 700 thermistor, or R3K (3000 Ω Balco).
Wetted materials include CPVC, PVDF, porous HDPE junction, pH glass, platinum sealed in glass, FKM O-rings, and EPR gaskets. The electrical connection is a BNC receptacle.
Key Product Differences
The series distinguishes between electrode types (PHE for pH, ORE for ORP) and body materials (CPVC vs. PVDF). Model numbers follow the pattern PHE-6510B Series - <ELECTRODE TYPE> - <MATERIAL> - <OPTION>. Mounting assemblies are ordered separately from electrodes, with model codes such as PHEH-65-10 (CPVC without ATC) and PHEH-65K-10 (PVDF without ATC). Materials of construction for the electrode and mounting assembly must match. Temperature compensation is not required with ORP electrodes.
PDFs & Manuals
