CL3512A-Series

Rugged J,K,T, E Thermocouple Calibrator and Thermometer

Models In Stock

8-Point, NIST-Traceable Calibration Certificate
Large 31/2 Digit Display
Type J/K/T/E TC Calibrator and Thermometer
Range -220 to 1372°C (-364 to 1999°F)

See Product Overview

CL3512A-Series

From ^SGD 584.60

Models In Stock

Shop Models

1 Variations available

See all series options below

Product Overview

Accuracy ± 0.1 %
Accuracy Detail ± (0.1% rdg + 1°C) Accuracy is specified for operating temperatures from 18 to 28°C (64 to 82°F), for 1 year, not including thermocouple error; ± (0.1% rdg + 1°C) range -60 to 1372°C [± (0.1% rdg + 2°F) range -76 to 1999°F] ± (0.1% rdg + 2°C) range -60 to -220°C[± (0.1% rdg + 4°F) range -76 to -364°F]
Auto-Ranging 0.1° to 1°
Auto-Ranging Note 0.1° to 1° resolution above 199.9 (°C or °F)
Battery Indication A low battery indication is displayed when the battery voltage drops below the operating level
Battery life 100 hr
Display Type LCD
Display Type Note 3 1⁄2 digit LCD with a maximum reading of 1999. Overrange: (-OL) is displayed. Zero: Automatic
Height 195 mm
Length 53 mm
Operating Temperature, Min 0 °C
Operating Temperature Note 0 to 50°C (32 to 122°F) @ <80% RH
Polarity Automatic, positive implied, negative polarity indication
Relative Humidity, Max 0.8
Relative Humidity, Min 0%
Resolution, Max 1 °C
Resolution, Min 0 °C
Resolution Note 0.1 (to 199.9) or 1°
Sampling Rate 1 Hz (1 update/second)
Series ID CL3512A-Series
Simulation Accuracy Measurement Accuracy + 1°C
Storage Temperature, Max 60 °C
Storage Temperature, Min -20 °C
Storage Temperature Note -20 to 60°C (-4 to 140°F), 0 to 80% RH with battery removed from meter
Supply Voltage 9 Vdc
Thermocouple Type J, K, T, E
Type of RTD Signal None
Weight 250 g
Weight Note Approximately 250 g (9 oz)
Width 92 mm

Supported Applications

The Omega CL3512A is a digital thermometer and calibrator that functions as two meters in one. It simulates type J, K, T, and E thermocouple signals to check the operation of a thermocouple meter and make rough calibration adjustments. Additionally, it operates as a dual input thermometer for measuring temperature via Type J/K/T/E thermocouples.

Operating Conditions & Performance

The CL3512A supports measurement ranges across four thermocouple types: Type J from -200°C to 1200°C (-328°F to 2192°F), Type K from -200°C to 1372°C (-328°F to 2502°F), Type T from -200°C to 400°C (-328°F to 752°F), and Type E from -200°C to 1000°C (-328°F to 1832°F). Accuracy is specified as ±0.5°C or ±0.5% of reading, whichever is greater.

Resolution options include 0.1°C or 0.1°F when the 0.1° setting is selected, and 1°C or 1°F when the 1° setting is selected. The typical response time (90%) is 1 second. Ambient operating temperature ranges from 0°C to 50°C (32°F to 122°F), with storage temperatures between -20°C to 60°C (-4°F to 140°F). Humidity ratings are 0% to 95% RH, non-condensing.

Configuration Options

The series features a large 3½ digit display with backlighting. Display selections include HOLD mode and unit toggling between °C/°F. The device is powered by a 9V battery.

Sensor Inputs: T1 and T2 input connectors for dual thermocouple measurement (Types J, K, T, E).
Output Signal: Simulated thermocouple output via an SMP male connector required for the source mode.
Housing Dimensions: 195mm (H) x 92mm (W) x 53mm (D).

Available options and accessories include a rubber boot, two K beaded wire thermocouples, a K calibration cable, a 9 volt battery, and an operator's manual.

Key Product Differences

The CL3512A is offered as a single handheld unit combining source (simulation) and measure functions. The device carries CE Mark approval and ISO 9001 Certified (USA) / ISO 9002 Certified (United Kingdom) status.

Operational warnings note that the instrument should not be used with voltages at the measurement surface over 24V AC or DC to avoid electrical shock. Temperature measurements in microwave ovens are prohibited to prevent damage or burns. The product is not designed for patient connected applications.

PDFs & Manuals

CL3512A-Series View More

View Less

Compliance