Skip to search Skip to main content Skip to navigation

Singapore 1800 622 1156 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here

We noticed you are in , please visit your local site by clicking the below link for regional offers and support.

OMNI-AMP-IV-Srs-TC-Amp

Rugged Epoxy Encapsulated Thermocouple Amplifier

  • 100% Encapsulated
  • 2µV/°C Zero Stability
  • 0.025°F/°F Reference Junction Stability
  • Up or Downscale TC Burn-out
OMNI-AMP-IV-Srs-TC-Amp
From SGD 1,026.77
Rugged Epoxy Encapsulated Thermocouple Amplifier OMNI-AMP-IV-Srs-TC-Amp OMNI-AMP-IV-Srs-TC-Amp
loading all models
Product Overview
  • Bandwidth 3 dB down at 1.5 Hz 40 dB/decade roll-off
  • CMRR 120 dB min @ 60 Hz
  • Cold Junction Compensation ± 0.045°C/°C
  • Common Mode Voltage +10 to -10 Vdc or 20 Volts peak-to-peak ac
  • Electrical Output ± 10 V into 10 kΩ min
  • Height 73 mm
  • Impedance Input 2 MΩ
  • Input Noise 0 to 1.5 Hz: 1.4 µVRMS (RTI)
  • Input Range 40 to 1500
  • Length 51 mm
  • Long Term Stability Zero: ± 1µV/Month;Span: ± 0.05%; Stability of zero point - 2 µV/°C , Span stability - ± 0.01%/°C
  • NMRR 80 dB min @ 60 Hz
  • Non-Linearity ± 0.005 %
  • Operating Temperature, Max 55 °C
  • Operating Temperature, Min 0 °C
  • Output Signal Voltage
  • Programmable Functions Trim Pot
  • Protection Output Protection: Continuous short circuit proof, Input Protection: Up to 115 Vac or Vdc common mode or differential Output Port
  • Resolution Infinite
  • Series ID OMNI-AMP-IV-Srs-TC-Amp
  • Storage Temperature, Max 80 °C
  • Storage Temperature, Min -20 °C
  • Supply Power 115 Vac @ 3 VA max
  • Supply Power Type AC
  • Weight 455 g
  • Width 95 mm
The OMEGA OMNI-AMP IV thermocouple amplifier is a high performance rugged epoxy encapsulated thermocouple amplifier with built-in power supply. Models are offered for either type J, K, T, E thermocouples or R,S,B thermocouples. Only the highest quality industrial components are used for reliable and long operation. Connections are made with an ordinary screwdriver to rugged terminal strips. The amplifier can be mounted using the bolts supplied with the unit.
en-SG
en_SG
Save Configuration