Singapore 1800 622 1156 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
HHF142-Series
Rotating Metal Vane Anemometer Kit w/ Volume Flow
Models In Stock
- Enter, Store, and Recall Up to 10 Duct Sizes
- High Accuracy (± 1.0% of Reading)
- Low Speed Sensitivity
- Wide Temperature Range from -20 to 100°C (-4 to 212°F)
HHF142-Series
From
SGD
2,413.99
Models In Stock
Product Overview
- Accuracy ± 1 %
- Accuracy Detail ± 1.0% of reading ± 1-digit
- Battery life 150 hr
- Battery Size and Type Alkaline AA
- Cable Length 5 ft
- Certifications NIST Traceable Calibration
- Display Type Backlit LCD
- Enclosure Temperature, Max 50 °C
- Enclosure Temperature, Min 0 °C
- Form factor Handheld
- Height 6.5 in
- Length 3.25 in
- Number of Digits 4
- Process Temperature, Max 100 °C
- Process Temperature, Min -20 °C
- Resolution 1 FPM
- Series ID HHF142-Series
- Supply Power Note 150 hours Appx
- Temperature Note Operating Temperature: Instrument: 0 to 50°C (32 to 125°F) Probe: -20 to 100°C (-4 to 212°F)
- Temperature Sensor Type Thermocouple Type K or Thermistor
- Volumetric Flow Rate, Max 9999 CFM
- Volumetric Flow Rate, Min 0 CFM
- Width 1.5 in
Supported Applications
The Omega HHF142 Series is a rotating metal vane anemometer kit designed for measuring air velocity and volume flow. The series identity supports applications in HVAC, aerospace development, industrial process airflow, and fluids research. It measures media including air and clean gases.
Operating Conditions & Performance
The HHF142 Series provides measurement ranges dependent on the probe diameter selected. The 25 mm (1") probe model supports a range of 1.5 to 35.00 MPS (300 to 6800 FPM). The 70 mm (2¾") probe model covers 0.25 to 36.60 MPS (50 to 7800 FPM). Accuracy is specified as ±1.0% of reading ±1-digit with a resolution of 1 FPM or 0.01 MPS.
Operating conditions for the instrument are defined from 0 to 50°C (32 to 125°F) ambient temperature, while the probe operates from -20 to 100°C (-4 to 212°F). The series includes a response time of 0.5 seconds per manual documentation and supports humidity up to 95% RH non-condensing.
Key Performance Specifications
- Measurement Type: Air Velocity, Volume Flow (calculated in ft³/min or m³/hr)
- Accuracy: ±1.0% of reading ±1-digit
- Resolution: 1 FPM or 0.01 MPS
- Response Time: 0.5 seconds
- Battery Life: Approximately 150 hours (3 "AA" alkaline batteries)
Configuration Options
The series is configurable across probe sizes, output signals, and environmental protection options. The main unit dimensions are 165 x 83 x 38 mm (6.5 x 3.25 x 1.5"). A hard carrying case is included with the kit.
Probe Sizes
- HHF142A: Handheld anemometer with a 25 mm (1") diameter probe.
- HHF142B: Handheld anemometer with a 70 mm (2¾") diameter probe.
Output Signals & Options
The series supports optional output configurations identified by suffixes in the model number guide. Available outputs include USB communications and 0 to 5 Vdc voltage output. Additional options include a protective boot with splash proof seals (suffix "-PB"). The manual also references analog output capabilities including 4-20 mA, RS-232, and Bluetooth as part of the broader family documentation.
Accessories & Replacement Parts
The kit includes extension rods (flexible, straight, and with handle), a 1.5 m (5') cable, batteries, an NIST calibration certificate, and an operator's manual. Replacement parts are available for the vane probe, connector cables, USB cables, analog output cables, and battery packages.
Key Product Differences
The primary distinction within the HHF142 Series is the probe diameter, which dictates the measurement range lower limit. The 70 mm (2¾") probe allows for measurements starting at 50 FPM compared to 300 FPM for the 1" probe.
Model Number Construction
Variations are denoted by suffixes added to the base model number:
- -PB: Protective boot and splash proof seals.
- -USB: USB communications capability.
- -V: 0 to 5 Vdc voltage output.
The series includes a display described as a 12.7 mm (0.5") LCD with 4-digits and LED backlight, capable of storing up to 10 unique duct sizes for volume flow calculation recall.
PDFs & Manuals
