Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
FD613-614
Portable Doppler Ultrasonic Flow meters
This product is no longer available and is being replaced by our FDT-25.
- 100 PPM OF 100 Microns in Size Paticulate or Bubbles Required
- Battery Operated
- Non-Invasive Clamp-On Transducer
- Large Character Display
FD613-614
From
TWD
35,479
Product Overview
- Accuracy ± 2 %
- Battery Size and Type Alkaline AA
- Cable Length 2 m
- Calibration Option NIST
- Display Note Single line—four-digit LCD readout of velocity [18 mm (0.7") digits], signal strength, measuring units, and low battery indication
- Display Type LCD
- Enclosure Ratings NEMA Type 12x
- Form factor Handheld
- Materials ABS
- Number of Digits 4
- Operating Temperature, Max 60 °C
- Operating Temperature, Min -20 °C
- Pipe Size, Min 0.25 in
- Series ID FD613-614
- Supply Power Note Battery powered, non-rechargeable alkaline, four “AA” (included), providing over 30 hours of continuous operation.
- Supply Power Type Battery
- Transducer Type Non-Invasive Clamp-On
- Velocity, Max 30 ft/s
- Velocity, Min 0.3 ft/s
The FD613 Series ultrasonic flow meter features advanced Trans-Phase measuring technology, providing accurate and reliable flow velocity assessments in closed full pipe systems. The FD613 utilizes a non- invasive clamp-on transducer which is placed on the outside of a pipe. Within seconds, the large 18 mm (0.7") LCD provides stable flowrate readings in feet (or meters) per second. This product operates on metal or plastic pipes containing liquids with more than 100 ppm of 100 micron or larger suspended solids or entrained gases.
PRINCIPLE OF OPERATION
The FD613 Series flowmeter utilizes an advanced Trans-Phase measuring technique, providing accurate, non-invasive fluid velocity assessment without opening the pipe. The FD613 Series utilizes two piezoelectric crystals contained within one transducer to transmit ultrasonic energy into the fluid stream and receive back energy reflected off discontinuities (suspended particles or entrained gases) within the moving liquid. Transformations that result from the energy reflections are processed and converted to a measurement of fluid velocity by the sophisticated software algorithm. The processor also controls all operations of the instrument from its ultra-efficient battery management circuitry to a proprietary FIR (Finite Impulse Response) filtration program.
PRINCIPLE OF OPERATION
The FD613 Series flowmeter utilizes an advanced Trans-Phase measuring technique, providing accurate, non-invasive fluid velocity assessment without opening the pipe. The FD613 Series utilizes two piezoelectric crystals contained within one transducer to transmit ultrasonic energy into the fluid stream and receive back energy reflected off discontinuities (suspended particles or entrained gases) within the moving liquid. Transformations that result from the energy reflections are processed and converted to a measurement of fluid velocity by the sophisticated software algorithm. The processor also controls all operations of the instrument from its ultra-efficient battery management circuitry to a proprietary FIR (Finite Impulse Response) filtration program.
