Need assistance? Call us: 1-800-663-4209
HHP8200-Series
Manometer with RS232 Output
Models In Stock
- Digital Display of Gauge or Differential Pressure
- User Selectable Engineering Units
- Min and Max Memory
- RS232 Output with Optional Software
HHP8200-Series
From
SGD
656.36
Models In Stock
Product Overview
- Accuracy Class > 0.25%
- Additional Features 1 Selectable Engineering Units, MIN/MAX
- Battery life 30 hr
- Battery Size and Type Alkaline 9V
- Data Interface N/A
- Height 182 mm
- Length 30 mm
- Number of Batteries 1
- Number of Digits 3.5
- Operating Temperature, Max 50 °C
- Operating Temperature, Min 0 °C
- Pressure Accuracy ± 0.3 %
- Measurement Pressure, Min 0 psi
- Measurement Pressure Type Differential
- Process Connection Note Hose barb for 4 mm ID tubing
- Process Connection Size 4 mm
- Process Connection Type Barbed Fitting
- Response Time 0.5 sec
- Series ID HHP8200-Series
- Storage Temperature, Max 60 °C
- Storage Temperature, Min -20 °C
- Supply Power Note 9V battery (included)
- Thermal Effects ±0.2% FS typical (±1% max)
- Weight 5.3 oz
- Width 72 mm
Supported Applications
The Omega HHP8200 Series consists of economical digital manometers designed to measure gauge pressure and differential pressure. These handheld instruments are specified for use with clean, dry, non-corrosive gases.
Operating Conditions & Performance
The series operates within an ambient temperature range of 0 to 50°C (32 to 122°F) and supports storage temperatures from -20 to 60°C (-4 to 140°F). Accuracy is rated at ±0.3% FS, with a typical response time of 0.5 sec. Temperature effects are documented as ±0.2% FS typical (±1% max).
Pressure ranges and proof pressures vary by model:
- HHP8205: Range 0 to 5 psi, Proof Pressure 20 psi
- HHP8215: Range 0 to 15 psi, Proof Pressure 30 psi
- HHP8230: Range 0 to 30 psi, Proof Pressure 60 psi
- HHP8200: Range 0 to 100 psi, Proof Pressure 150 psi
Resolution varies by model and selected engineering unit. For example, in the HHP8205 (0-±5 psi) range, resolution is 0.003 psi; for the HHP8200 (0 to 100 psi), it is 0.1 psi.
Configuration Options
The series offers configurable engineering units selectable by the user, including psi, mbar, bar, inH₂O, cmH₂O, mmHg, ozin², kgcm², kPa, ftH₂O, and inHg. Note that specific unit availability may vary; for instance, HHP4252 is listed with a restricted set of units (psi, mbar, bar, inH₂O, mmH₂O).
Key features include:
- LCD display with bright backlight
- Digital data logging via RS232 output port using an optional 9 pin sub-D connector and software (HHF91-SW)
- HOLD function, MIN/MAX memory, and auto power off (approx. 20 minutes after power on)
- Low battery indication
- Included connection hose tubing with a process connection of hose barb for 4 mm ID tubing
The instrument is powered by an included 9V battery, providing approximately 30 hours of operation without the backlight. Physical dimensions are 182 H x 72 W x 30 mm D (7.16 x 2.83 x 1.18") with a weight of 150 g (5.3 oz).
Key Product Differences
The series includes four primary models defined by their pressure range: HHP8205, HHP8215, HHP8230, and HHP8200. While the documentation references five available models, only these four are explicitly detailed in the "To Order" table with corresponding ranges, resolutions, and proof pressures.
Model-specific resolution differences exist across units; for example, at 15 psi range (HHP8215), resolution is 0.01 psi compared to 0.02 psi at 30 psi (HHP8230). The HHP4252 and HHP4230 models are mentioned in engineering unit contexts or ordering examples but lack full specification entries in the primary "To Order" table.
PDFs & Manuals