Series-605

Magnehelic® Transmitter for Low DP Monitoring in HVAC, 4-20 mA Output

Easy to read gage permits viewing from far away
Patented design provides quick response to pressure changes means no delay in signaling and alerting to critical situations
Durable and rugged housing and high-quality components combined provides long-service life and minimized down-time
Optional stainless steel bezel is the same installation diameter as Magnehelic® gage and simplifies field upgrade to 605 indicating transmitter

See Product Overview

Series-605

From ^SGD 845.53

Shop Models

19 Variations available

See all series options below

Data Sheet

Product Overview

Accuracy Detail Electrical: ± 4%, Mechanical: ± 4% (includes linearity, hysteresis, repeatability)
Compensated Temperature, Max 48.9 °C
Compensated Temperature, Min 0 °C
Dial Depth 68 mm
Dial Dia 4 in
Dial Outer Diameter 127 mm
Display Type N/A
Electrical Connection Screw Terminal
Electrical Output 4 to 20 mA
Long Term Stability ± 1% FS/year
Loop Resistance 0 to 1250 Ω max
Materials, Wetted Consult Factory
Media Compatibility Clean dry air / inert gas, HVAC / room air, Inert / non-reactive gases, Helium, Nitrogen, Non-Conductive Gases, Non-Corrosive Dry Gases
Mounting Note Vertical Diaphragm
Operating Temperature, Max 48.9 °C
Operating Temperature, Min -6.67 °C
Output Signal Current
Power Consumption max 38 mA
Measurement Pressure Type Differential
Process Connection Size 1/8 in
Process Connection Type NPT Female
Proof Pressure Up to 10 psi
Series ID Series-605
Span Adjustment Potentiometers
Supply Power Type DC
Supply Voltage 10 to 35 Vdc
Thermal Effects ± 0.045% FS/°C
Weight 811 g
Zero Setting Adjustable Range Protected Potentiometers

The Series 605 Magnehelic® Indicating Transmitter provides for both visual monitoring and electronic control of very low differential pressure. The Series 605 is ideal for control applications in building HVAC systems where local indication is desired during routine maintenance checks or necessary when trouble shooting the system. The easily read dial gage is complimented by the two-wire, 4 to 20 mA control signal utilizing the time-proven Dwyer® Magnehelic® gage mechanical design and Series 600 transmitter technology. The two-wire design with terminal strip on the rear simplifies connection in any 4 to 20 mA control loop powered by a 10 to 35 VDC supply.

NIST CALIBRATION available in Product Configurator.

Please see Series AT-605 for ATEX approved.

Product Applications

Monitor pressures in ducts, rooms, or total building pressures
Filter monitoring
Local indication of clean room pressures with process signal sent to control room

PDFs & Manuals

Series 605 Catalog Page 605 - Instruction Manual 605 - Instruction Manual View More

View Less

Compliance