Singapore 1800 622 1156 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
LC901
Load Washers to Measure Bolt Compression
Models In Stock
- All Stainless Steel Construction
- Mounting Washers Included
- NIST Calibration Certificate
LC901
From
SGD
986.05
Models In Stock
Product Overview
- Accuracy ± 3.5 %
- Bridge Resistance 120 Ω
- Calibration Option 5 POINT NIST
- Electrical Output 2 mV/V
- Force Type Compression
- Load Cell Type Load Washer
- Materials Stainless Steel
- Operating Temperature, Max 93 °C
- Operating Temperature, Min -54 °C
- Overload, Max 150% FS
- Process Temperature, Max 71 °C
- Process Temperature, Min 16 °C
- Safe Overload 150% FS
- Series ID LC901
- Supply Power Note 10 Vdc, 15 Vdc maximum
- Supply Voltage 10 Vdc
- Thermal Span Effect ± 0.036% rdg/°C
- Thermal Zero Effect ± 0.018% FSO/°C
- Zero/Balance Error ± 4%
Supported Applications
The Omega LC900/LCM900 Series consists of compression load cells designed to measure the clamping force of a bolt. These units are engineered for severe industrial environments, offering excellent long-term stability with all stainless steel construction. The series is intended for mounting on a flat surface between two included mounting washers.
Operating Conditions & Performance
The LC901 and LCM901 load washers operate within an ambient temperature range of -54 to 93°C (-65 to 200°F), with a compensated temperature range of 16 to 71°C (60 to 160°F). Performance specifications include ±3.5% FSO linearity, hysteresis and repeatability combined accuracy, and a zero balance of ±4% FSO. Thermal effects are rated at Zero: ±0.018% FSO/°C and Span: ±0.036% rdg/°C.
Electrical characteristics feature an excitation voltage of 5 Vdc (10V max), a nominal output signal of 2 mV/V, and a bridge resistance of 120 Ω nominal. The series supports measurement ranges from 0-2000 lb to 0-100,000 lb for standard models and 0-10,000 N to 0-500,000 N for metric models. Overload ratings are defined as Safe Overload: 130% of capacity and Ultimate Overload: 150% of capacity.
Configuration Options
The series is available in two primary configurations based on electrical termination:
- Stripped Ends (LC901/LCM901): Features a 1.2 m (4') insulated shielded cable.
- Connector End (LC911/LCM911): Designed for use with the PT01F10-6P mating connector, available as an accessory.
Bolt sizes and capacities cover both inch and metric standards:
- Inch Series (LC901/LC911): Available in ¼", ⅜", ½", ⅝", ¾", and 1½" bolt sizes with capacities ranging from 2,000 lb to 100,000 lb.
- Metric Series (LCM901/LCM911): Available in 6 mm, 10 mm, 13 mm, 16 mm, 19 mm, and 38 mm bolt sizes with capacities ranging from 10,000 N to 500,000 N.
Each unit includes a 5-point NIST-traceable calibration certificate and a 59 kΩ shunt resistor. The series holds RoHS compliance.
Key Product Differences
The LC901/LCM901 models are distinguished by their stripped cable ends, while the LC911/LCM911 variants feature a connector interface compatible with the PT01F10-6P mating connector. Model numbering follows the format LC901-<BOLT SIZE>-<CAPACITY> for inch models (e.g., LC901-1/4-5K) and LCM901-<BOLT SIZE>-<CAPACITY> for metric models (e.g., LCM901-6-10Kn). Dimensions vary by size, with overall diameters ranging from 25.4 mm to 66.7 mm and thicknesses varying between 4.75 mm and 22.2 mm depending on the specific capacity and bolt diameter.
PDFs & Manuals
