Singapore 1800 622 1156 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
ON-910-ON-970
Immersion Thermistor Probes with 1/8 in NPT Fitting & Lead Wire
Models In Stock
- Immersion Sensor with 1/8NPT Mounting Thread
- The ON-910 Includes a 4.5' Long, 5/32 Diameter Probe with 12' long PVC Insulated Lead Wires. The ON-970 Includes a 5' Long, 1/8' Diameter Probe with 12' Long PFA Insulated Lead Wires.
- Can be Used in Liquid Immersion and Pressurized Applications
- Available with Resistances of 2252 Ohms, 3000 Ohms, 5000 Ohms, 10,000 Ohms and 30,000 Ohms at 25°C
ON-910-ON-970
From
SGD
179.55
Models In Stock
Product Overview
- Number of Wires 2
- Probe Type Tubular Thermistor Probes
- Process Temperature, Min -80 °C
- Series ID ON-910-ON-970
- Sheath Material 304 Stainless Steel
- Temperature Probe Style Immersion Probe
- Temperature Sensor Type Thermistor
- Thermistor Resistance Temperature, Max 70 °C
- Thermistor Resistance Temperature, Min 0 °C
Supported Applications
The Omega ON-910 and ON-970 series are tubular thermistor sensors designed for liquid immersion and pressurized applications. These probes feature a threaded mounting fitting intended for installation in pipes or closed vessels.
Operating Conditions & Performance
The standard configuration supports a measurement range of 0 to 70°C (0 to 165°F) with an interchangeability of ±0.2°C across this span. The maximum working temperature for the primary thermistor elements is 100°C (212°F). Optional high-stability thermistors are available with a maximum working temperature of 75°C (165°F), offering improved interchangeability of ±0.1°C at 0 to 70°C and a storage/working range for best stability from -80 to 75°C (-110 to 165°F). The wetted sheath material is 300 series stainless steel.
Configuration Options
The series offers configurable dimensions, resistance values, and termination options to fit specific instrumentation needs. Key selection parameters include:
- Probe Lengths: ON-910 models feature a 4.5" (114 mm) stem length with a ⁵/₃₂" (4 mm) diameter; ON-970 models provide a 5" (127 mm) stem length with a ¼" (3.2 mm) diameter.
- Process Connection: All units include a ¼ NPT threaded fitting for mounting in pipes or vessels.
- Cable Insulation: ON-910 series utilizes PVC insulation, while the ON-970 series uses PFA cable insulation.
- Resistance Values @ 25°C: Standard options include 2252 Ω (44004), 3000 Ω (44005), 5000 Ω (44007), 10,000 Ω (44006), and 30,000 Ω (44008). Optional high-stability elements include codes 44033 through 44032.
- Electrical Termination: Standard delivery features stripped wires. A phone plug connector is available by adding the -PP suffix to the model number.
- Cable Lengths: The standard cable length is 12" (300 mm). Additional lengths are configurable by appending the required length in inches to the end of the model number.
Key Product Differences
The primary distinction between models lies in stem geometry and cable insulation. The ON-910 series provides a 4.5" (114 mm) insertion length with PVC-insulated leads, whereas the ON-970 series offers a longer 5" (127 mm) insertion length paired with PFA-insulated cables. Both series share the same ¼ NPT process connection and are available across identical resistance value families.
Model numbering follows the format ON-(**)-4400X, where ** denotes '910' or '970', X represents the specific thermistor code, and optional suffixes indicate custom cable length (in inches) or a phone plug connector (-PP). For example, ON-970-44004-36-PP specifies an ON-970 probe with 2252 Ω resistance, a 36" extended lead wire, and a phone plug termination.
PDFs & Manuals
