Singapore 1800 622 1156 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
7352-3-Series
Heavy-Duty Combination pH Sensor For Submersible Applications
Models In Stock
- Strong PPS Body
- Low Maintenance
- Short or Long Insertion Lengths
- Any Angle Orientation
7352-3-Series
From
SGD
412.68
Models In Stock
Product Overview
- Applications Agricultural & Hydroponics Applications, Chemicals, Environmental Monitoring, Food and Beverage, Mining & Metallurgy, Pharmaceuticals, Power Plants & Boilers, Pulp & Paper Industry, Water Treatment
- Cable Length 4.6 m
- Diameter 0 mm
- Drift <2 mV per week
- Electrical Connection N/A
- Enclosure Material PPS, PTFE, FKM, Glass
- Impedance 150 MΩ
- Length 0 mm
- Measurement Type pH
- PH Measurement Range 0 to 14.00 pH
- Measurement Pressure, Max 100 psig, 100 psi
- Measurement Pressure, Min 0 psig, 0 psi
- Pressure Note 0 to 100 psig or 0 to 150 psig (HT high temperature version) β ±0.1% over full range
- Process Connection Size 3/4 in
- Process Connection Type NPT Male
- Process Temperature, Max 80 °C
- Process Temperature, Min 0 °C
- Reference Cell Double junction, KCl/AgCl, KNO3
- Response Time 95% of reading in 10 sec
- Sensor Type N/A
- Series ID 7352-3-Series
- Sodium Error Less than 0.05 pH in 0.1 Molar Na+ ion @ 12.8 pH
- Temperature Note 0 to 80°C (32 to 176°F) or 0 to 110°C (32 to 230°F) (HT high temperature version)
- Zero/Balance Error 7.0 ±0.2 pH
Supported Applications
The Omega PHE-7352 and PHE-7353 series are heavy-duty combination pH sensors designed for submersible applications. These electrodes feature a strong PPS body, sealed double junction construction resistant to electrode poisoning solutions (cyanide, ammonia, sulfide, heavy metals in appreciable concentrations), and a non-fouling patented Porous PTFE liquid junction.
Documented use cases include:
- Process water applications
- Waste water pipeline insertion
- Large diameter pipe insertion requiring greater penetration depth
- Installations at any angle orientation
Operating Conditions & Performance
The series operates within a pH range of 0 to 14 pH. Temperature capability depends on the specific version selected: standard models support 0 to 80°C (32 to 176°F), while the high temperature (-HT) version supports 0 to 110°C (32 to 230°F). Pressure ratings are 0 to 100 psig for standard versions and 0 to 150 psig for the -HT high temperature version.
Performance specifications include an accuracy of ±0.1% over full range, a response time of 95% of reading in 10 sec, and drift less than 2 mV per week. The sensor exhibits a sodium error of less than 0.05 pH in 0.1 Molar Na+ ion @ 12.8 pH and an impedance of 150 MΩ @ 25°C (77°F). Zero potential is specified as 7.0 pH ± 0.2 pH.
Wetted Materials
The wetted materials for the sensor include PPS, PTFE, FKM, and glass.
Configuration Options
The series is available in two primary insertion configurations to accommodate different pipeline penetration needs:
- PHE-7352: 152 mm (6.0") overall length with a 23 mm (0.9") insertion depth.
- PHE-7353: 152 mm (6.0") overall length with a 58.4 mm (2.30") insertion depth.
All models come complete with a standard 4.6 m (15') cable; non-standard lengths are available for additional cost. The sensors feature ¾ MNPT front and rear facing threads as the process connection.
ATC Sensor Options
Automatic Temperature Compensation is configurable via specific option codes:
- -PT100: 100 Ω Platinum RTD (standard for -HT high temperature version).
- -PT1K: 1000 Ω Pt RTD.
The series holds RoHS certification. The reference cell utilizes a double junction KNO3 and KCl/AgCl design.
Key Product Differences
Differences within the PHE-7352-15-(*) model number guide are defined by insertion length, temperature rating, and ATC sensor type. The base models (PHE-7352-15 and PHE-7353-15) represent heavy-duty submersible pH electrodes without specified ATC options in the part number suffix.
Variants with "-PT100" or "-PT1K" suffixes include the respective RTD sensors. The addition of the "-HT" suffix designates the high temperature version (0 to 110°C) which includes a 100 Ω Pt RTD ATC and supports up to 150 psig pressure.
PDFs & Manuals
