Singapore 1800 622 1156 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
PCL1000-Series
Handheld Multifunction Calibrator w/ Pressure Modules
- Excellent Accuracy ±0.6°C T/C, ±0.3°C RTD 0.015% Electrical 0.05% Pressure
- Read and Source Modes
- 10 T/C Types 8 RTD types plus 400 Series Thermistor
- Stores up to 9 setpoints for each output function
PCL1000-Series
From
SGD
3,981.83
Product Overview
- Battery life 25 hr
- Battery Size and Type Alkaline AAA
- Continuity Test 0 to 400.0 Ω; audible tone under 10 Ω
- Data Interface RS232
- Frequency CPM: Source 2 to 1000.0; measure 0 to 1000.0,Hz: Source 0 to 1000; measure 0 to 1000.0,kHz: Source 1 to 10.0; measure 0 to 10.00
- Height 221 mm
- Length 58 mm
- Loop Supply Limits Voltage Drive: 1 mA
- Current, Max 0 to 24 mA
- Resistance 3200 Ω
- RTD Input Note RTD Types: JIS, Ni120, Cu10; RTD IEX Range: 0.01 to 3 mA; RTD Frequency Response: 10 ms
- RTD Type Pt 385 (100, 200, 500, 1 kΩ)
- Series ID PCL1000-Series
- Thermistor Type Series 400
- Thermocouple Type J, K, T, E, N, R, S, U, B, L
- Voltage Note Low: 0 to 20.000 Vdc; read and source High: 0 to 250 Vdc or Vac; read only
- Weight 0.9 kg
- Width 107 mm
Supported Applications
The Omega PCL1000 is a high-accuracy multifunction calibrator designed to read and source thermocouples, RTDs, thermistors, voltage, current, frequency, resistance, and pressure signals. It combines the functions of a precision calibrator and multimeter for process device calibration tasks.
Documented measurement types include:
- Thermocouple (Types J, K, T, E, R, S, N, B, L, U)
- RTD (Pt 385: 100, 200, 500, 1 kΩ; Pt 392: JIS, Ni120, Cu10)
- Thermistor (Series 400)
- Voltage and Current
- Frequency (CPM, Hz, kHz)
- Resistance
- Pressure via optional PCL-PM series modules
Operating Conditions & Performance
The unit operates with a power supply of 4 "AA" batteries (included), providing typical battery life of 25 hours. Physical dimensions are 221 H x 107 W x 58 mm D (8.7 x 4.2 x 2.3") and weight is 0.9 kg (1.9 lb). A protective rubber boot is included.
Performance specifications vary by measurement type:
- Voltage Accuracy: ±0.015% rdg Electrical
- T/C Type J Accuracy: ±0.3°C ±10 μV (±0.4°C total)
- RTD Pt100 Accuracy: ±0.1°C ±0.075 Ω (±0.3°C total)
- Resistance Accuracy: 400 Ω: ±0.1 Ω; 3200 Ω: ±1.0 Ω
- Pressure Accuracy: 0.25% FS Pressure (via PCL-PM modules)
- mA Compliance: Up to 1000 Ω load
- Voltage Drive: 1 mA
- RTD IEX Range: 0.01 to 3 mA
- RTD Frequency Response: 10 ms
- Continuity: 0 to 400.0 Ω; audible tone under 10 Ω
Configuration Options
The PCL1000 series supports a broad range of electrical and temperature measurement capabilities with optional pressure expansion.
Measurement Ranges
- Voltage: Low: 0 to 20.000 Vdc (read and source); High: 0 to 250 Vdc or Vac (read only)
- Current: 0 to 24.000 mA
- Resistance: 0 to 400.00 Ω and 400 to 3200 Ω
- Frequency (CPM): Source 2 to 1000.0; measure 0 to 1000.0
- Frequency (Hz): Source 0 to 1000; measure 0 to 1000.0
- Frequency (kHz): Source 1 to 10.0; measure 0 to 10.00
- Pressure: Ranges from 5 to 5000 psig via optional PCL-PM modules, including vacuum, absolute, compound, and differential pressures.
Configuration & Interfaces
- User Interface: Direct keyboard entry with storage of up to 9 setpoints per output.
- Communication: RS232 interface available. Note: Pressure module uses RS232 output; computer connection via RS232 is not possible while a pressure module is connected.
Included Accessories
- Test leads
- Type K thermocouple with cable
- Protective rubber boot
- 4 "AA" alkaline batteries
- Calibration certificate and operator's manual
Key Product Differences
The base model PCL1000 is a high-accuracy multifunction calibrator. Pressure capability requires the addition of specific accessories:
- PCL-PMA: Required pressure module adaptor for connecting PCL-PM modules.
- 700MA: Required adaptor to RS232 port for pressure module communication.
- PCL1000-SCC: Soft carrying case (optional).
The PCL-PM series modules are sold separately and required for pressure applications. The base unit does not include a built-in pressure sensor; it interfaces with external modules via the RS232 port using the specified adaptors.
PDFs & Manuals
