Singapore 1800 622 1156 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
CL309A-Calibrator
Handheld 4 to 20 mA Current Loop Calibrator with 24 V Loop Power
Models In Stock
CL309A-Calibrator
From
SGD
2,132.87
Models In Stock
Product Overview
- 2-Wire Transmitter Simulate Voltage Burden (2-Wire Transmitter): 2 V at 20 mA; Overload/Current Limit Protection (2-Wire Transmitter): 24 mA; Loop Voltage Limits (2-Wire Transmitter): 2 to 100 Vdc (fuse-less protected from reverse polarity connections); Battery Life (2-Wire Transmitter): 125 hr
- Battery life 30 hr
- Battery Size and Type Alkaline AA
- Height 4.06 cm
- Length 14.3 cm
- Loop Supply Limits Compliance Voltage: 24 Vdc @ 20 mA; Drive Capability: 1200 Ω at 20 mA for 15 hours nominal
- Measurement Accuracy Note Accuracy (Source): EZ check(s) at 4 and 20 mA(*) ±0.025% at 4.00 mA and 20.00 mA (±0.005 mA) 0.0 to 24.00 mA ±0.05% of 24.00 mA (±0.01 mA); Accuracy (Read mA): Accuracy: Below 24.01 mV: ±0.05% of 24.00 mA (±0.01 mA) Above 24.00 mV: ±0.05% of 52.00 mA (± 0.02 mA); Accuracy (Voltage Read): ± 0.05% of FS; Temperature Effect (Voltage Read): ±100 ppm/°C of FS
- Measuring Range Ranges and Resolution (Source): 0.00 to 24.00 mA full span or -25.0 to 125.0% of 4 to 20 mA; Current (Read mA): 4 to 20 mA; Current Note: 0.00 to 52.00 mA full span OR -25.0 to 300.0% of 4 to 20 mA; Voltage Burden (Read mA): 2V at 50 mA; Battery Life (Read mA): 125 hr; Ranges (Voltage Read): -99.99 to 99.99 Vdc full span (FS); Input Resistance (Voltage Read): >2 MΩ; Battery Life (Voltage Read): >125 hr
- Miscellaneous Low battery indication with nominal 1 hour of operation left; over-voltage protection to 135 vrms (rated for 30 seconds) or 240 vrms (rated for 15 seconds); high contrast graphic liquid crystal display with 10.5 mm (0.413") high digits
- Noise ± 0.005 mA of reading
- Operating Temperature, Max 60 °C
- Operating Temperature, Min -20 °C
- Overcurrent Protection 24 mA DC
- Relative Humidity 10% ≤RH ≤90% (0 to 35°C), non-condensing,10% ≤RH ≤70% (35 to 60°C), non-condensing
- Series ID CL309A-Calibrator
- Storage Temperature, Max 60 °C
- Storage Temperature, Min -30 °C
- Supply Power Note 4 “AA” alkaline (included) 1.5V (Duracell MN1500 or equivalent); optional 120 Vac 50/60 Hz AC adaptor available; NiMh rechargeable battery kit available
- Temperature Effect ± 0.005%/°C of FS (*) These are internal calibrated cardinal reference points and source/power and measure 2-wire transmitter
- Weight 12.1 oz
- Width 7.62 cm
Supported Applications
The Omega CL309A is a handheld current loop calibrator designed to check, calibrate, and measure instruments in a 4 to 20 mA DC loop. The device sources and reads current signals, simulates a 2-wire transmitter, and powers 2-wire transmitters while measuring their output. It displays current readings in milliamps or as a percentage of the 4-20 mA range.
Operating Conditions & Performance
The CL309A operates within an ambient temperature range of -20 to 60 °C (-5 to 140 °F) and supports storage from -30 to 60 °C (-22 to 140 °F). Relative humidity limits are defined as 10% ≤RH ≤90% (0 to 35 °C), Non-condensing, or 10% ≤RH ≤70% (35 to 60 °C), Non-condensing. Accuracy specifications vary by mode: the device achieves ±0.025% at 4.00mA and 20.00mA (±0.005mA) for source, power measure, and simulate functions. For EZ-Check™ settings at 4 & 20 mA, accuracy is ≤ ± 0.05% of 24.00mA (±0.01mA). In read modes below 24.01mA, accuracy is ≤ ± 0.05% of 24.00mA (±0.01mA); above 24.00 mA, it is ≤ ± 0.05% of 52.00mA (±0.02mA). Voltage read accuracy is ≤ ± 0.05 % of Full Scale with a resolution of 10mV.
Performance includes loop compliance voltage ≥ 24 DCV @ 20.00mA and loop drive capability of 1200 Ω at 20 mA for 15 hours nominal. The device features overload/current limit protection up to 54 mA nominal in simulate modes, with a voltage burden ≤ 1.2V at 20 mA (simulate) or ≤ 2V at 50 mA (read). Battery life is ≥ 30 hrs at 12 mA nominal for source and power measure mode, and ≥ 125 hours nominal for simulate and read modes.
Configuration Options
The CL309A series supports the following measurement ranges and configurations:
- Current Ranges: Source/Power Measure/Simulate 0.00 to 24.00 mA Full Span OR -25.0 to 125.0% of 4-20 mA; Read mode supports 0.00 to 52.00 mA Full Span OR -25.0 to 300.0% of 4-20 mA.
- Voltage Range: Reads DC volts from -99.99 to +99.99 VDC with input resistance ≥ 2 MΩ.
- EZ-CHECK™ Settings: Pre-set outputs at 4.00 mA (0.0%) and 20.00 mA (100.0%).
- Power Supply: Operates on four (4) 'AA' Alkaline 1.5V batteries (Duracell MN1500 or equivalent).
- Connections: Red and black banana plugs.
- Housing: Includes a rubber boot with overall dimensions L=5.63 x W=3.00 x H=1.60 inches (L=14.30 x W=7.62 x H=4.06 centimeters) and weighs 12.1 ounces including boot & batteries.
Optional accessories include a (100 to 120) VAC Adaptor, a (200 to 240) VAC Adaptor, and a NiMH Rechargeable battery kit. The display is a high contrast graphic liquid crystal with 0.413" (10.5 mm) high digits.
Key Product Differences
The CL309A model functions as an integrated handheld unit combining source, measure, and simulate capabilities in a single enclosure. The device distinguishes between Source/Power Measure modes (limited to 24 mA full span) and Read mode (extended to 52 mA). It provides specific EZ-Check™ presets for rapid verification at standard loop points.
PDFs & Manuals
