Singapore 1800 622 1156 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
FMC-5000-Series
Coriolis Mass Flow Meter
- Built for food, beverage, and pharma batching, chemical blending, and petrochemical transfer by mass.
- Measures mass flow, volume, density, and temperature from a single meter with no moving parts.
- Coriolis mass flow meter for direct mass measurement of liquids, slurries, and gases.
- No flow conditioning or straight pipe runs required, so it fits tight skids where other meters won't.
FMC-5000-Series
From
SGD
11,567.03
Product Overview
- Additional Features 1 Remote Mounted Display/Transmitter
- Data Interface RS485
- Data Interface Note RS485 (RTU Modbus®), HART® (-HART option)
- Density Accuracy ± 0.002 g/cm³
- Density, Max 3 g/cm³
- Density, Min 0.2 g/cm³
- Density Repeatability ± 0.001 g/cm³
- Electrical Connection 1/2 in NPT female Conduit with Screw Terminal block
- Electrical Output 4 to 20 mA, 0 to 10 kHz
- Enclosure Ratings IP65, NEMA Type 4X
- Humidity Range 5 to 95% RH
- Materials, Wetted 304 Stainless Steel, 316L Stainless Steel
- Operating Pressure, Max 230 psi
- Operating Pressure, Min 0 psi
- Operating Pressure Note 16 bar (230 psi), [Optional: 25 bar (360 psi), 40 bar (580 psi) and 63 bar (913.7 psi)]
- Operating Temperature, Max 55 °C
- Operating Temperature, Min -40 °C
- Output Detail Pulse Output: 0 to 10 kHz, ± 0.075% Full Scale Current Output: 4 to 20 mA, 0.005% Full Scale
- Output Signal Current, DC Pulse
- Process Temperature, Min -50 °C
- Series ID FMC-5000-Series
- Supply Power Note 18 to 36 Vdc, 85 to 265 Vac (-AC option), 15 W
- Supply Voltage 18 to 36 Vdc
- Temperature Accuracy ± 1 °C
- Weight 26.5 lb
Supported Applications
The Omega FMC-5000 Series Coriolis Mass Flow Meter is designed according to the Coriolis Force Principle. It measures mass flow rate, volume, density, and temperature for liquids, gases, and slurries. The series is used in industries such as petroleum, petrochemical, chemical, pharmaceutical, pulp and paper, food and dairy.
Documented applications include:
- Batch control
- Blending
- Filling
- Dosing
- Custody transfer
- Process gas measurements
Operating Conditions & Performance
The FMC-5000 Series offers accuracy over a wide flow range and requires no flow conditioning or straight pipe runs. The meter is rugged with no moving parts, resulting in minimal maintenance.
- Flow Accuracy/Repeatability: 0.1/0.05% (Liquid Only) for FMC-5100; 0.2/0.1% (Liquid Only) for FMC-5200; 0.5/0.25% for FMC-5500.
- Density Measuring: Range of 0.2 to 3.0 g/cm³ with an error of ± 0.002 g/cm³ and repeatability of 0.001 g/cm³.
- Temperature Accuracy: ±1.0°C.
- Process Temperature Range - Integrated Type: -50 to 125°C (-58 to 257°F).
- Process Temperature Range - Remote Type (-R): -50 to 200°C (-58 to 392°F).
- Ambient Temperature: -40 to 55°C (-40 to 131°F).
- Working Humidity: (5 to 95%) RH at 25°C (77°F).
Configuration Options
The series supports sizes from 15 to 150 mm (½ to 6"). Process connections are available as ANSI, DIN, JIS, or sanitary flanges. Wetted materials include a Body Material of 304 Stainless Steel and Measuring Tube Material of 316 L SS.
Electrical specifications and outputs:
- Power Supply: 18 to 36 Vdc, 85 to 265 Vac (-AC option), 15 W.
- Communications: RS485 (RTU Modbus®) or HART® (-HART option).
- Pulse Output: 0 to 10 kHz, ± 0.075% Full Scale.
- Current Output: 4 to 20 mA, 0.005% Full Scale.
Housing and protection details:
- Protection Rating: NEMA 4X (IP65).
- Electrical Connections: ½ NPT conduit.
- Approvals: CE, RoHS (Pending).
Pressure ratings are available at 16 bar (230 psi), with optional ratings of 25 bar (360 psi), 40 bar (580 psi), and 63 bar (913.7 psi). Flow ranges vary by model size; for example, the FMC-5xx1 supports flow rates from 100 to 3000 kg/h depending on accuracy class.
Key Product Differences
The series is organized into three primary accuracy families:
- FMC-5100 Series: Provides 0.1% flow accuracy (Liquid Only).
- FMC-5200 Series: Provides 0.2% flow accuracy (Liquid Only).
- FMC-5500 Series: Provides 0.5% flow accuracy.
Housing configurations include integrated and remote mounted display/transmitter options. To replace the RS485 communications with HART communications, add "-HART" to the model number for an additional charge. For units with a remote mounted display/transmitter, add "-R" to the model number.
Process connection variations are indicated by suffixes in the model number: change the "A" at the end of the model number to "D" for DIN flanges, "J" for JIS flanges, or "S" for sanitary flanges (liquid only), with no additional charge.
PDFs & Manuals
