Need assistance? Call us: 1-800-663-4209
Series-1227
Dual Range Flex-Tube® U-Manometers, Clear Plastic, Magnetic Clips
- Reads 0 to 16 in w.c. as a U-tube and -0.20 to 0 to 2.6 in w.c. as an inclined gage
- Clear, shatterproof indicating tube provides overpressure protection
- Black markings on a stark white scale for positive definition
Series-1227
From
SGD
343.38
Product Overview
- Major Resolution 0-16˝ water
- Measurement Type Pressure
- Minor Resolution Vertical U-Tube Manometer: 0.2"; Inclined Manometer: 0.02"
- Pressure(Vertical), Min 0 inH₂O
- Series ID Series-1227
Supported Applications
The Dwyer Series 1227 Dual Range Flex-Tube® U-Manometers are designed to measure pressure, vacuum, and differential pressure. These instruments function as versatile manometers capable of reading high-range pressure on the right leg or operating as an inclined gage for low-range readings on the bottom leg.
Operating Conditions & Performance
The Series 1227 provides dual measurement ranges depending on orientation. As a vertical U-tube manometer, the unit reads 0 to 16" water with 1" major divisions and .2" minor divisions; the Model 1227M metric version covers 0-400 mm water column. When configured as an inclined gage, the scale is 17" long, reading .20 to 0 to 2.6" water with .02" minor divisions; the Model 1227M metric version covers -5 to 0 to 70 mm water column.
The instrument features a sturdy, clear plastic housing described as shatterproof indicating tube material.
Dimensions and Construction
- Overall Length: 26" [660.40]
- Height: 5" [127]
- Width: 3/4" [19.05]
Configuration Options
The series is available in two primary unit types: Model 1227 for English units and Model 1227M for metric units.
Included Accessories
Each Series 1227 manometer ships with the following standard accessories:
- Two magnetic carrying plugs with retainers (for use when not in service)
- Two magnetic clips to hold the instrument to a metal surface
- Flexible red vinyl plastic tubing connectors
- Brass terminal tube, 1/4" diameter x 8" long
- One terminal tube holder
- Brass adaptor, 1/8" pipe thread to plastic tubing
- One 4-1/2" length of Tygon® plastic tubing
- One 1 ounce bottle .826 sp. gr. red gage fluid
- Vinyl carrying case
Maintenance and Replacement Parts
The series supports the use of Dwyer .826 specific gravity red gage fluid (D models) or water/mercury. Available replacement parts include:
- Red gage fluid: part # A-101 (1 oz)
- Fluorescein green color concentrate: part # A-126 (1 oz)
- Cleaning brush: part # A-366
Key Product Differences
The primary distinction between variants is the unit system. Model 1227 displays readings in inches of water, while Model 1227M displays readings in millimeters of water column.
Safety and Handling Notes
- California Proposition 65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
- Avoid harsh soaps and solvents which may damage the manometer and void warranty.
- Avoid using fluids other than those specified; corrosive fluids may damage the unit.
- When replacing O-rings, apply a thin coat of petroleum jelly to assure a good seal. Do not coat the O-ring used in the overpressure safety trap.
PDFs & Manuals
Accessories
accessories
Clear flexible vinyl tubing, 3/16" ID x 5/16" OD, lengths to 500'; 45 psi maximum pressure @ 73°F.
$0.85 / foot
78687 In Stock
consumables
installation hardware
Adapter, brass, 1/8" NPT to 3/16" rubber and 1/8" ID plastic tubing.
$6.85 / each
49172 In Stock