Skip to search Skip to main content Skip to navigation

Singapore 1800 622 1156 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
  1. Home
  2. See Temperature
  3. See Thermocouples
  4. See Connector Thermocouple Probes
  5. Dual Element Thermocouple Probes with Standard Size Connectors
We noticed you are in , please visit your local site by clicking the below link for regional offers and support.
Stay here.
Go to the site >
Dual Element Thermocouple Probes with Standard Size Connectors
Click and hold to zoom

ICIN-DUAL

Dual Element Thermocouple Probes with Standard Size Connectors

Models In Stock
  • Two Sensor Readings Allows Two Readings of a Single Point
  • Continuous Monitor and Control & Built-in Backup
  • Made from Special Limits of Error Material
  • Glass Filled Nylon Connector Rated to 180°C (356°F)
ICIN-DUAL
From SGD 234.74
Models In Stock
Shop Models
12 Variations available
See all series options below
ICIN-DUALData Sheet

Data Sheet
Dual Element Thermocouple Probes with Standard Size Connectors ICIN-DUAL ICIN-DUAL

Can't find the right model?

Use our custom configurator to fine tune your product

Product Overview
  • Cable Clamp PCLM-DTC
  • Connector Temperature, Max 220 °C
  • Connector Temperature, Min 0 °C
  • Process Connection Size N/A
  • Process Temperature, Min 0 °C
  • RTD Type N/A
  • Series ID ICIN-DUAL
  • Temperature Sensor Type Thermocouple

Supported Applications

The Omega ICIN-DUAL series consists of Dual Element Thermocouple Assemblies with Standard Size Connectors. These assemblies are manufactured using 4-conductor OMEGACLAD™ wire and feature rugged DTC connector terminations. Documented applications include two sensor readings with built-in backup, two readings of a single point, and continuous monitor and control.

Operating Conditions & Performance

The series meets or exceeds Special Limits of Error (SLE) and EN 60584-2, Tolerance Class 1. The glass-filled nylon connector body is rated to 220°C (425°F). Standard overall length for the probes is 300 mm (12"). Sheath diameters range from 1.5 to 6.0 mm (1/16" to 1/4").

Configuration Options

The ICIN-DUAL series supports a broad configuration envelope across thermocouple alloys, sheath materials, junction types, and special service options.

  • Thermocouple Alloys: IRON-CONSTANTAN (Type J), CHROMEGA™-ALOMEGA™ (Type K), CHROMEGA CONSTANTAN (Type E), and COPPER-CONSTANTAN (Type T).
  • Sheath Materials: 304 SS, Inconel®, or Super OMEGACLAD™ XL Sheath. To order with 310, 316, or 321 stainless steel sheaths, change 'SS' in the model number to '310SS', '316SS', or '321SS' respectively.
  • Junction Types: Grounded (G), Ungrounded (U), and Exposed (E).
  • Diameters: 1.5 mm (1/16"), 3.0 mm (1/8"), 4.5 mm (3/16"), and 6.0 mm (1/4").
  • Connector Type: DTC Type Dual Connector.
  • Special Options: PFA coating is available with a maximum temperature of 205°C (400°F). Custom connector types are available upon consultation with custom engineering. To order Super OMEGACLAD XL sheath, change 'N' in the model number to 'XL'.

Accessories including mating connectors and cable clamps are sold separately.

Key Product Differences

The series distinguishes variants by thermocouple alloy code (IC for Type J, CA for Type K, CX for Type E, CP for Type T), sheath material designation ('IN' for Inconel®, 'SS' for 304 SS, or specific grades like '316SS'), and junction type suffixes. Model numbers follow the format: Thermocouple Alloy - Sheath Dia. mm (inch) - Junction Type.

Specific mating connector model numbers vary by alloy:

  • Type J (IRON-CONSTANTAN): DTC-J-F
  • Type K (CHROMEGA™-ALOMEGA™): DTC-K-F
  • Type E (CHROMEGA CONSTANTAN): DTC-E-F
  • Type T (COPPER-CONSTANTAN): DTC-T-F
The cable clamp model number PCLM-DTC is consistent across all rows.

en-SG
en_SG
Save Configuration