Singapore 1800 622 1156 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
DRSL-DC2
Isolated DIN Rail Signal Conditioner
Choose a Variant
Power Consumption
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
|
| Accuracy | ± 0.05 % |
| Approvals | CE, UL, RoHS |
| Calibration Temperature, Max | 28 °C |
| Calibration Temperature, Min | 20 °C |
| Conversion Rate | 1:1 |
| Current Measurement Range | 0 to 20.5 mA |
| EMC Immunity Note | Extended EMC Immunity NAMUR NE 21, A Criterion, Burst: <±1% of span |
| Electrical Output | 0 to 20.5 mA |
| Enclosure Ratings | IP20 |
| GrossWeightValue | 0.24 |
| Height | 113 mm |
| Input Range Note | Current Input:;Functional Range: 0 to 23 mA; Programmable Measurement ;Ranges: 0 to 20 mA and 4 to 20 mA;Input Voltage Drop: <1.5V; 2-Wire Transmitter Supply:>17V/20 mA;Voltage Input:; Functional Range: 0 to 11.5V/0 to 5.75V; Programmable Measurement Ranges: 0 to 5V, 1 to 5V, 0 to 10V, 2 to 10V ;Input Resistance: ≥500 kΩ |
| Input Type | Voltage, Current |
| Installation | Pollution degree 2 and measurement/overvoltage category II |
| Isolation | 300 Vac |
| Length | 115 mm |
| Load Resistance | Current Output: 23 mA/600 Ω max |
| MTBF | 284 yrs |
| Mounting | DIN Rail 35 mm Standard, EN 60715 |
| Noise Calibration | >60 dB |
| Number of Inputs | 2 |
| Operating Temperature, Max | 70 °C |
| Operating Temperature, Min | -25 °C |
| Output Detail | Current Output: Programmable Signal Ranges:0 to 20 mA and 4 to 20 mA Current Limit: ≤28 mA Voltage Output: Programmable Signal Ranges:0 to 10, 2 to 10, 0 to 5 and 1 to 5V |
| Output Signal | Current, Voltage |
| Power Consumption | 1.2 W, Internal - max 0.65 W |
| Relative Humidity | 0 to 95% RH (non-condensing) |
| Response Time | < 7 ms |
| Response Time Note | Response Time (0 to 90%, 100 to 10%): <7 ms |
| Screw Terminal Torque | 0.5 Nm |
| Series ID | DRSL-DC1-DC2-Srs-Sig-Cond |
| Stability | Load Stability: ≤0.01% of span/100 Ω |
| Storage Temperature, Max | 85 °C |
| Storage Temperature, Min | -40 °C |
| Supply Power Type | DC |
| Supply Voltage | 16.8 to 31.2 Vdc |
| Temperature Coefficient | <±0.01% of span/°C |
| Weight | 70 g |
| Width | 6.1 mm |
| Wire Gauge | 26 to 12 AWG |
| Country of Origin | Denmark |
| See All Specs | |
PDFs & Manuals
Accessories
installation hardware
Parada de módulo (atornillada al carril DIN para soportar y sujetar dispositivos montados)
8,58 € / unidad
0 In Stock
Carril de alimentación (con cubierta y dos tapas finales, una derecha y una izquierda), longitud 1 m (3,3 ft)
188,10 € / unidad
0 In Stock
meters/controllers
Unidad conector de alimentación, salida 24 Vdc/2,5 A para riel de alimentación
134,31 € / unidad
0 In Stock