Need assistance? Call us: 1-800-663-4209
Adjustable-Pressure-Snubber
Adjustable Pressure Snubbers – Protects Instruments from Fluctuations
Models In Stock
- Reduces pressure spikes and pulsations on instruments
- Adjustable to tune system response
- Extends sensor and switch life by smoothing pressure fluctuations
Adjustable-Pressure-Snubber
From
SGD
49.95
Models In Stock
Product Overview
- Media Compatibility Clean dry air / inert gas, Clean process / cooling water, Compatible Liquids, Inert / non-reactive gases, Oils / lubricants, Organic solvents, Water
- Operating Temperature, Max 302 °F
- Operating Temperature, Min -4 °F
- Pressure Limits Up to 5690 psi
- Series ID Adjustable-Pressure-Snubber
- Weight 8.4 oz
Supported Applications
Dwyer Adjustable Pressure Snubbers protect pressure instruments against fluctuations, surges, spikes, and fluid hammer. The series is designed for service with compatible liquids and gases. By alleviating surges and pulsations, these devices assure steady pressure readings and extend instrument life.
Operating Conditions & Performance
The Adjustable Pressure Snubbers operate within a process temperature range of -4 to 302°F (-20 to 150°C). The series supports a maximum pressure limit of 5690 psi (392 bar). Wetted parts are constructed from Brass or 316 SS. Each unit weighs 8.4 oz (238 g).
Configuration Options
The series offers fully adjustable damping via a fine thread adjustable valve, allowing for the tuning of harmful harmonic vibration from fluid systems. The design isolates the instrument from the process when service or replacement is necessary.
- Materials: Brass and 316 SS wetted parts are available across model families.
- Process Connections: Configurations include male/female BSPP (British Standard Pipe Parallel) and NPT threads in sizes of 1/4", 3/8", and 1/2". Specific dimensions vary by connection size, with overall height ranging from 25.0 to 28.0 units.
- Modeling: The model number guide follows the format A-, where material and connections define the specific variant (e.g., models A-251 through A-262).
Key Product Differences
Variants are distinguished by wetted material and thread standard. Models A-251, A-252, A-253, A-254, A-255, and A-256 feature Brass construction with BSPP or NPT connections respectively. Corresponding models A-257 through A-262 utilize 316 SS for the same connection types.
A California Proposition 65 warning applies to this product: it may expose users to chemicals including Lead, which is known to cause cancer and birth defects or other reproductive harm. For more information, refer to www.P65Warnings.ca.gov.
PDFs & Manuals
