Besoin d'aide? Appelez-nous: 1-800-663-4209
OM-VIB-101-Logger
Enregistreur de données de vibration/accélération USB 3 axes
3-Axis USB Vibration/Acceleration Data Logger
Modèles en stock
- Mountable Data Logger Uses Three Accelerometers to Precisely Measure Acceleration of Operating Equipment on X, Y and Z Axes
- Stores up to 327,600 Data Points in Flash Memory
- One Button Starts/Stops Data Logging Without a PC
- Plug-and-Play USB 2.0 Interface–No Need for Cables, Cradles or Docks
OM-VIB-101-Logger
À partir de
SGD
379.35
Modèles en stock
Aperçu du produit
- Acceleration Range ± 16 g
- Battery Size and Type 3.6V Li-ion
- Calibration Accuracy Accelerometer : ±0.5 g
- Data Interface USB
- Frequency Response 0 to 60 Hz
- Height 54 mm
- Humidity Range 5 to 95% RH
- LED Indicators Red and Green LEDs Indicate Device Status (Recording, Not Recording, Low Battery, Memory Full)
- Length 113 mm
- Memory 327600 Data Points
- Memory Note 327,600 data points in 16 MB flash memory
- Millivolt Range N/A
- Number of Measurements 3
- Operating Temperature, Max 45 °C
- Operating Temperature, Min 0 °C
- Measurement Pressure, Max 0 psi
- Sampling Rate 20 Hz (20 updates/second)
- Sampling Rate Note 50 ms to 24 hours
- Series ID OM-VIB-101-Logger
- Software Windows XP SP3 / Vista / 7 and 8 (32 and 64 - bit)
- Supply Power Type Battery
- Weight 73.5 g
- Width 32.5 mm
Supported Applications
The Omega OM-VIB-101 is a 3-Axis USB Vibration/Acceleration Data Logger designed to measure acceleration on X, Y, and Z axes. The series identity centers on assessing the health and diagnosing performance problems of rotating machinery.
Operating Conditions & Performance
The OM-VIB-101 operates within an ambient temperature range of 0 to 45°C (32 to 113°F) at a humidity level of 5 to 95% RH. The device measures acceleration across a range of -16 to 16 g with a typical accuracy of ±0.5 g and supports a frequency range of 0 to 60 Hz.
Data logging capacity is specified as 327,600 data points stored in 16 MB flash memory. The unit features user-selectable sampling times from 50 ms to 24 hours, enabling a maximum continuous logging time of 60 hours on the included power source.
Configuration Options
The series is configured as a mountable, memory stick-sized data logger with a plug-and-play USB 2.0 interface for connectivity and software compatibility with Windows® XP/Vista/7/8. The device dimensions are 113 L x 54 W x 32.5 mm D (4.45 x 2.13 x 1.28") including the mounting pedestal, which features magnets and three screw holes for installation.
Power is supplied by a 3.6V/1200 mA rechargeable lithium battery included with the unit; replacement batteries are available under part number OM-EL-BATT. The weight of the logger without the battery is 73.5 g (2.6 oz).
- Interface: USB 2.0
- Sensor Axes: X, Y, Z (3-axis)
- Included Accessories: Mounting pedestal with magnets and three screw holes, USB extension cable, protective cap, Windows software on CD, user's manual.
Key Product Differences
The primary model in this series is the OM-VIB-101, described as a 3-axis USB vibration/acceleration data logger. The bundle also lists the OM-EL-BATT replacement battery as an associated part number for maintenance.
PDF & Manuels
Logiciels & Pilotes