Singapore 1800 622 1156 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
DP41-Series
1/8 DIN High Performance Temperature, Process and Strain Meter
Models In Stock
- Extended 5-Year Warranty at No Extra Charge
- 6-Digit Display
- Min/Max Storage
- 4 Isolated Open Collector Outputs
DP41-Series
From
SGD
1,761.93
Models In Stock
Product Overview
- A/D Conversion Dual-slope technique
- Accuracy ± 0.005 %
- Common Mode Rejection 120 dB
- Common Mode Voltage 1500 Vp per HV test
- Current Measurement Range 0 to 20 mA, 4 to 20 mA
- Cutout Dimensions 45 x 92 mm
- Display Color Red, Green
- Display Size 13.7 mm (0.54 in)
- Display Type 6 Digit Single LED
- Display Type Note Red or green 6-digit, 14-segment, 13.7 mm (0.54") high; 4 alarm indicators
- Enclosure Ratings IP65, NEMA Type 4
- Form factor 1/8 DIN
- Height 48 mm
- Input Configuration Single-ended
- Length 165 mm
- Normal Mode Rejection 60 dB
- Number of Inputs 1
- Offset Adjustment 0 to 999,999 or 0 to -99,999, programmable
- Operating Temperature, Max 50 °C
- Operating Temperature, Min 0 °C
- Polarity Unipolar/Bipolar, programmable
- Power Consumption 10 W
- Power Consumption Note 6 W nom., 10 W max
- Reading Rate 3/s or 13/s, 60 Hz; 3/s or 12/s, 50 Hz
- Relative Humidity 95% RH, non-condensing
- Resolution 15-bit
- Sampling Rate 13 Hz (13 updates/second)
- Sensor Break Protection Up-scale or down-scale, programmable
- Sensor/Transmitter Power 10 V at 30 mA; 24V at 25 mA
- Series ID DP41-Series
- Setpoint 4 isolated open collector; rated 150 mA at 1V sink, 30V open
- Span Adjustment 0.00001 to 500,000 counts, programmable
- Step Response 1 sec to 99.9%
- Storage Temperature, Max 85 °C
- Storage Temperature, Min -40 °C
- Supply Power Note 115 or 230 Vac, 49 to 400 Hz; 10 to 32 Vdc
- Supply Power Type AC
- Thermal Span Effect ±20 ppm
- Warm-Up to Rated Accuracy 50 min
- Weight 574 g
- Width 96 mm
Supported Applications
The DP41 Series is a 1/8 DIN high-performance digital panel meter and controller for industrial instrumentation, with a high-resolution 6-digit display. A single platform reads a remarkably wide set of inputs - DC voltage and current, thermocouples (9 types), 2-, 3- or 4-wire RTDs, strain gages, load cells and potentiometers - so one meter family can be standardized across temperature, process, force and weight applications.
A 14-segment LED display gives clear alphanumeric messaging, and built-in alarm and control capability lets the meter act on a measurement, not just display it. Isolated RS232/RS485 communications, analog retransmission, BCD output and relay outputs are available as plug-in boards for integration and control.
The front panel is rated NEMA 4 (IP65) for wash-down and dusty environments, and the meter carries CE, UKCA and cULus marks. A red LED display is standard, with a green LED available at no charge.
Operating Conditions & Performance
The meter offers a headline accuracy of ±0.005% rdg with a 15-bit resolution and dual-slope conversion. Step response is 1 s to 99.9%, the reading rate is 3 or 13 readings per second at 60 Hz (3 or 12 at 50 Hz), and rated accuracy is reached after a 50-minute warm-up. Thermocouple and RTD resolution is 0.01°.
Thermocouple input ranges and accuracies are:
- Type J: -210 to 760°C (-346 to 1400°F), to 0.2°C (0.3°F).
- Type K: -270 to 1372°C (-454 to 2500°F), to 0.2°C (0.3°F).
- Type T: -270 to 400°C (-454 to 752°F).
- Type E: -270 to 1000°C (-454 to 1832°F).
- Type R/S: -50 to 1768°C (-58 to 3214°F).
- Type B: 100 to 1820°C (212 to 3300°F).
- Type N: -270 to 1300°C (-454 to 2372°F).
- J DIN: -200 to 900°C (-328 to 1652°F), to 0.6°C (1.0°F).
- RTD: -200 to 850°C (-328 to 1562°F), to 0.2°C (0.3°F).
DC ranges cover 0 to 100 mV, ±500 mV, 0 to 5 V, 1 to 5 V, 0 to 10 V, 0 to 100 V, ±5 V, ±50 V, 0 to 20 mA and 4 to 20 mA, and bridge excitation is available at 10 V at 30 mA or 24 V at 25 mA.
The meter operates from 0 to 50°C (32 to 122°F) at 95% RH non-condensing and stores at -40 to 85°C (-40 to 185°F). Power is 115 or 230 Vac, 49 to 400 Hz, or 10 to 32 Vdc. Analog output spans 0 to 5 V, 0 to 10 V, 0 to 20 mA and 4 to 20 mA, with dual 7 A mechanical relays available as a board option.
Configuration Options
The model number is assembled as DP41 - <Input Type> - <Power> - <Communications> - <Output> - <Accessory>, so the meter is configured input-first and then built up with power, communication and output options. Power and display options include:
- -230 - 230 Vac power.
- -DC - 10 to 32 Vdc isolated power.
- -GN - green LED display.
Output and communication capability is added through plug-in boards, which map to the suffixes in the model number:
- DP40-A3 - analog output.
- DP40-S24 - isolated RS232/485 communications.
- DP40-B - isolated BCD output board.
- DP40-R - dual 7 A mechanical relays; DP40-R4 - dual 7 A and dual 1 A relays.
Because inputs, power, communications and outputs are ordered independently, a base DP41-TC becomes a fully featured DP41-TC-230-S2A with mains power, communications and analog output, or a low-voltage DP41-E-DC-AR4 with analog output and relays.
Key Product Differences
The platform is organized first by input type. The core To Order indicators are:
- DP41-E - process voltage/current indicator.
- DP41-TC - thermocouple indicator.
- DP41-RTD - RTD indicator.
- DP41-U - universal input indicator.
- DP41-S - strain gage indicator; DP41-W - NTEP weight strain indicator.
Each is also offered as a DP41Z split-display version (DP41Z-E, DP41Z-TC, DP41Z-RTD, DP41Z-U, DP41Z-S and DP41Z-W) with a remote display. Every input model then combines with power, communication and output suffixes to form the full lineup - for example DP41-U-230-S2, DP41-RTD-DC-S4 or DP41-E-S2AR4.
Accessories include the SPC4 and SPC18 NEMA 4 (IP65) splashproof lenses, 9- and 25-pin serial connectors (DP40-9SC2, DP40-9SC4, DP40-25SC2, DP40-25SC4), the DP41-TBS bench stand and the DPP-5 1/8 DIN panel punch. The meter measures 48 H x 96 W x 165 mm D (1.89 x 3.78 x 6.5") and weighs 574 g (1.27 lb).
