Deutschland 07056-9398-0 | Internationale Rufnummer ++49 (0) 7056-9398-0 | Willkommen auf unserer neuen Website! Haben Sie einen Fehler oder ein Problem entdeckt? Bitte melden Sie es hier.
Therm-Room
Thermistor-Raumfühler
- Raumtemperaturmessung
- Anwendungen für dekorative Wandsensoren
- Bürogebäude
- Krankenhäuser & Schulen
- Hochschulen
- Gewerbegebäude
- OEM-Möglichkeiten
- Dachgeräte
- Zuluft-/Abluft-/Rücklauf-/Mischlufttemperaturen
Therm-Room
Von
€
35,72
Produktübersicht
- Kurventyp NTC (Negativer Temperaturkoeffizient)
- Hinweis zur Anzeige LCD-Anzeige Versorgungsspannung: 9 Vdc bis 35 Vdc / 24 Vac (50 Hz bis 60 Hz); LCD-Anzeige Stromaufnahme/VA: < 4 mA / 0,12 VA; LCD-Anzeige Genauigkeit: ±2 °F oder ±2 °C bei 21,5 °C (71 °F) typisch; LCD-Anzeige Bezeichnung: °F (Fahrenheit) oder °C (Celsius); Anzahl der Stellen: 3 1/2 Segmentanzeige; LCD-Anzeige Lebensdauer: mindestens 50.000 Stunden
- Elektrischer Anschluss Schraubklemme
- Gehäuse-Nennwerte UL94-HB
- Anzahl der Messpunkte 1
- Betriebsfeuchtigkeit 10 bis 95 % rF, nicht kondensierend
- Betriebstemperatur, max. 50 °C
- Betriebstemperatur, min. 1.5 °C
- Optionen Kurzer Thermistor (Standard); Feld (Jumper) wähPfundar „Trockenkontakt”-Schließung (separater Eingang); kurzer Sollwert auf Anfrage erhältlich
- Verlustleistung 3 mW / °C außer: A/1.8K Serie: 1 mW / °C A/10K-E1 Serie: 2 mW / °C
- Reaktionszeit 10 sunden nominal
- Serien-ID Therm-Room
- Sollwert-Toleranz ±10 % des Bereichs
- Lagertemperatur, max. 65 °C
- Lagertemperatur, min. -40 °C
- Temperaturmessbereich 1,5 bis 50 °C
- Anzugsmoment 0,5 Nm Minimum; 0,6 Nm Maximum
- Drahtstärke 26 AWG
Supported Applications
ACI Thermistor Room Series sensors are documented for indoor room temperature measurement and building-management-system connections. The source describes wall or junction-box mounting in areas with good air circulation.
Operating Conditions & Performance
The series uses thermistor sensing and screw terminal blocks. Source material documents four-way air-flow enclosure design and an optional foam pad for insulation from thermal drafts within a wall or wall surface.
Configuration Options
- Documented configurations include beige or white enclosure styles, setpoint, after-hours override, communication-jack, and LCD options.
- Available connection and mounting accessories include mounting plates, locking covers, thermostat guards, and the foam insulation pad.
Key Product Differences
Product variations differ by enclosure style, sensor configuration, display option, setpoint or override selection, and communication connection. LCD-option details remain option-specific.
PDFs & Handbücher
-
m0000255_dxf_aci_dxf
-
m0000256_dxf_aci_dxf
-
m0000253_dxf_aci_dxf
-
m0000257_dxf_aci_dxf
-
m0000259_dxf_aci_dxf
-
m0000251_dxf_aci_dxf
-
m0000254_dxf_aci_dxf
-
m0000258_dxf_aci_dxf
-
m0000262_dxf_aci_dxf
-
m0000260_dxf_aci_dxf
-
m0000261_dxf_aci_dxf
-
m0000252_dxf_aci_dxf
-
m0000255_pdf_aci_pdf
-
m0000256_pdf_aci_pdf
-
m0000253_pdf_aci_pdf
-
m0000257_pdf_aci_pdf
-
m0000259_pdf_aci_pdf
-
m0000251_pdf_aci_pdf
-
m0000254_pdf_aci_pdf
-
m0000258_pdf_aci_pdf
-
m0000262_pdf_aci_pdf
-
m0000260_pdf_aci_pdf
-
m0000261_pdf_aci_pdf
-
m0000252_pdf_aci_pdf




