Zum Suchen überspringen Zum Hauptinhalt überspringen Zur Navigation überspringen

Deutschland 07056-9398-0 | Internationale Rufnummer ++49 (0) 7056-9398-0 | Willkommen auf unserer neuen Website! Haben Sie einen Fehler oder ein Problem entdeckt? Bitte melden Sie es hier.

Wir haben festgestellt, dass Sie sich in befinden. Bitte besuchen Sie Ihre lokale Seite, indem Sie auf den untenstehenden Link für regionale Angebote und Unterstützung klicken.

OM-CP-MOTOR101A-Series

Maschinen Ein/Aus Datenprotokollierungssystem

Machinery On/Off Data Logging System
  • Keine externe Stromversorgung erforderlich
  • Auslösestrom 150 mA
  • Kompatibel bis zu 200 A
  • Echtzeitbetrieb
OM-CP-MOTOR101A-Series
Von 원 602,784.00
Machinery On/Off Data Logging System OM-CP-MOTOR101A-Series OM-CP-MOTOR101A-Series
loading all models
Produktübersicht
  • Batterielebensdauer bis zu 10 Jahre
  • Batteriegröße und -typ 3,6 V Li-Ion
  • Baudrate 115200
  • Steuerausgang N.O. 1,0 A bei 30 VAC/VDC
  • Strommessbereich 0,15 bis 200 A
  • Abmessungen des Stromschalters 2,1" x 3,5" x 1,0"
  • Datenschnittstelle USB
  • Datenspeicherung Starten und stoppen Sie das Gerät mehrmals, ohne Daten herunterladen oder mit einem PC kommunizieren zu müssen. Aktivierung: So starten Sie das Gerät: Halten Sie die Taste 5 Sekunden lang gedrückt, die grüne LED blinkt. Während dieser Zeit hat das Gerät mit der Protokollierung begonnen.
  • Höhe 0.6 in
  • Indikatortyp Rote LED, grüne LED
  • Länge 1.4 in
  • Material ABS
  • Hinweis zum Messbereich 0,15 A (150 mA) fest (200 mA AC für 50 Hz Betrieb)
  • Messart Motor ein/aus Status
  • Speicher 406.323 Messwerte
  • Hinweis zum Speicher 406.323 Messwerte; softwarekonfigurierbares Speicherüberlaufverhalten
  • Anzahl der Messungen 1
  • Betriebstemperatur, max. 40 °C
  • Betriebstemperatur, min. -15 °C
  • Echtzeitaufzeichnung Das Gerät kann mit einem PC verwendet werden, um Daten in Echtzeit zu überwachen und aufzuzeichnen.
  • Relative Luftfeuchtigkeit 10 bis 90 % RF, nicht kondensierend
  • Abtastrate 4 Hz (4 Aktualisierungen/Sekunde)
  • Hinweis zur Abtastrate 4 Hz bis 1 alle 24 Stunden
  • Sensortyp Induktive Spule
  • Serien-ID OM-CP-MOTOR101A-Series
  • Software XP SP3/Vista/7 und 8
  • Art der Stromversorgung Batterie
  • Zeitgenauigkeit ±1 min/Monat (bei 20ºC/68ºF, eigenständige Datenaufzeichnung)
  • USB-Kabellänge 6 ft
  • Gewicht 113 g
  • Breite 2.5 in

Supported Applications

The Omega OM-CP-MOTOR101A Series is a Machinery On/Off Data Logging System, part of the NOMAD® Family. It measures and records on/off status changes for motors, fans, pumps, and other equipment drawing up to 200 Amps. The system uses a current switch to monitor current flow through a wire, triggering a state change at a defined trip point.

Operating Conditions & Performance

The series operates within an ambient temperature range of -15 to 40°C (5 to 104°F) and humidity levels from 10 to 90% RH non-condensing. It monitors current in the range of 0.15 to 200 A with a fixed trip point of 0.15A (150 mA), or 200 mA AC for 50 Hz operation. The device features time accuracy of ±1 minute/month at 20°C/68°F in stand-alone data logging mode.

Key performance specifications include:

  • Status Output (Max): N.O. 1.0 A @ 30 Vac/Vdc
  • Reading Rate: Configurable from 4 Hz to once every 24 hours
  • Memory Capacity: 406,323 readings with software-configurable memory wrap and automatic wrap-around functionality
  • Battery Life: Typical life of 10 years, dependent upon frequency and duty cycle

Configuration Options

The OM-CP-MOTOR101A Series is available in configurations that include the data logger and current switch with or without software. The system utilizes a split-core current switch housing made of ABS plastic, allowing installation around existing conductors.

  • Model Configurations:

The series offers two primary ordering options: OM-CP-MOTOR101A-KIT (includes data logger, current switch, and software/cable) or OM-CP-MOTOR101A (data logger and current switch only; software sold separately).

  • Start Modes: Immediate start, delay start up to 18 months, or multiple pushbutton start/stop
  • Password Protection: Optional password programming restricts access to configuration options while allowing data readout without the password
  • Engineering Units: Native measurement units can be scaled to display alternative types such as on/off or open/closed
  • Data Retrieval: USB interface (cable required) connects at 115,200 baud for real-time monitoring and data export to text or Microsoft Excel® files
  • Software Compatibility: Windows XP SP3/Vista/7 and 8 (32- and 64-bit)

Key Product Differences

The series distinguishes between the complete kit configuration, OM-CP-MOTOR101A-KIT, which includes the data logger, current switch, and OM-CP-IFC200 Windows software with USB interface cable. The base model, OM-CP-MOTOR101A, includes only the data logger and current switch; the OM-CP-IFC200 software and 1.8 m (6') USB interface cable are sold separately.

Physical dimensions differ by component: the Data Logger measures 36 x 56 x 16 mm (1.4 x 2.2 x 0.6") with a weight of 113 g (4 oz), while the Current Switch measures 54 x 89 x 26 mm (2.1 x 3.5 x 1.0"). The complete system including the OM-CP-IFC200 weighs 255 g (9 oz). Replacement batteries are available as part number OM-CP-BAT105.

de-DE
en_AU
Konfiguration speichern