Deutschland 07056-9398-0 | Internationale Rufnummer ++49 (0) 7056-9398-0 | Willkommen auf unserer neuen Website! Haben Sie einen Fehler oder ein Problem entdeckt? Bitte melden Sie es hier.
F1500-F2000-F4000
Dünnschicht-Platin-RTD-Elemente
Modelle auf Lager
- Élément RTD à film mince plat et profil bas
- Spécification DIN EN 60751 (selon IEC 60751)
- Plage de température de -50 à 500°C (-58 à 932°F) selon la classe de précision (voir tableau ci-dessous)
- Coefficient de température α = 0,00385Ω/Ω/°C nominal
F1500-F2000-F4000
Von
€
4,63
Modelle auf Lager
Produktübersicht
- Résistance d'isolation 10 MΩ
- Remarque concernant la résistance d'isolation >10 MΩ @ 20°C; >1 MΩ @ 500°C
- Matériau du fil Fil de nickel plaqué platine
- Nombre de fils 2
- Temps de réponse, air 3 sec à 50 % ; 9 sec à 90 %
- Remarque sur le temps de réponse Temps de réponse Courant d'eau (v = 0,4 m/s) t0.5 = 0,2 s, t0.9 = 0,4 s; Courant d'air (v = 1 m/s) t0.5 = 3,0 s, t0.9 = 9,0 s
- Temps de réponse, eau 0,2 sec à 50 % ; 0,4 sec à 90 %
- Effet d'auto-échauffement 0,4 K/mW à 0 °C
- Hauteur du capteur 0.8 mm
- ID de série F1500-F2000-F4000
- Résistance aux chocs 100 g d'accélération avec une demi-onde sinusoïdale de 8 ms
- Coefficient de température 0,00385Ω/Ω/°C
- Type de capteur de température RTD
- Résistance aux vibrations Taux de balayage de 10 à 2000 Hz, accélération 40g
- Diamètre du fil 0.2 mm
- Longueur du fil 10 mm
The F2020 thin film RTD element is a 2.0mm x 2.0mm size. OMEGAFILM platinum thin film RTD elements are manufactured using materials and processes similar to those employed in the manufacture of integrated circuits. This results in a rugged, reliable sensing element that can be produced in a wide range of sizes, resistances, and accuracies to meet even the most demanding of applications.
OMEGAFILM RTDs conform to the internationally accepted requirements of IEC60751, which defines the resistance vs. temperature characteristics of the sensors, their base resistance at 0°C (32°F), and their accuracy (see below). RTDs conforming to IEC751 have a temperature coefficient of resistance (also known as Alpha) of 0.00385Ohms/Ohms/°C between 0 and 100°C.
As a result of conforming to an internationally recognized standard such as IEC751, OMEGAFILM RTD elements can be used as-is worldwide with a multitude of controllers and instruments designed to function within these requirements. Elements are referred to as pt100, pt500 or pt1000 Ohm configurations
Note on Assembling Omega "F" Series RTD Elements to Extension Wires: These RTD elements are made with platinum coated nickel lead wires. Since platinum does not easily wet with most soft solders, we advise that they be spot welded or silver soldered to extension wires when required.
OMEGAFILM RTDs conform to the internationally accepted requirements of IEC60751, which defines the resistance vs. temperature characteristics of the sensors, their base resistance at 0°C (32°F), and their accuracy (see below). RTDs conforming to IEC751 have a temperature coefficient of resistance (also known as Alpha) of 0.00385Ohms/Ohms/°C between 0 and 100°C.
As a result of conforming to an internationally recognized standard such as IEC751, OMEGAFILM RTD elements can be used as-is worldwide with a multitude of controllers and instruments designed to function within these requirements. Elements are referred to as pt100, pt500 or pt1000 Ohm configurations
PDFs & Handbücher
