Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
RH-Combo-Outdoor-Air-Nickel
Humidité relative de l'air extérieur avec capteur RTD en nickel
Relative Luftfeuchtigkeit Außenluft mit Nickel-RTD-Sensor- Überwachung der Außenluftfeuchtigkeit
- Economizer-Steuerung
- Psychrometrische Berechnungen wie Enthalpie und Taupunkt
- Reinigungsanwendungen
RH-Combo-Outdoor-Air-Nickel
From
Product Overview
- Elektrischer Anschluss Schraubklemme
- Gehäuse-Nennwerte UL94-5VB
- Filter Hydrophober Filter
- Isolierung Geätztes Teflon (PTFE) Farbige Leitungen
- Strom, max. 8 mA
- Messart Luftfeuchtigkeit, Temperatur
- Betriebstemperatur, max. 60 °C
- Betriebstemperatur, min. -40 °C
- Ausgangsdetails 0-5 Vdc: 12 - 40 Vdc / 18 - 28 Vac
- Relative Luftfeuchtigkeit 10 bis 95%
- Typ des Sensors für relative Luftfeuchtigkeit Kapazitiv mit hydrophobem Filter
- Wiederholgenauigkeit 0,5 % RF, ± 0,05 °C
- Reaktionszeit 20 sunden typisch
- Empfindlichkeit 0,1 % RF
- Serien-ID RH-Combo-Outdoor-Air-Nickel
- Stabilität FH-Stabilität: Weniger als 2 % Drift / 5 Jahre, Nickel-RTD-Stabilität: +/-0,05 % nach 1000 Stunden bei 302 °F (150 °C)
- Lagertemperatur, max. 65 °C
- Lagertemperatur, min. -40 °C
- Art der Stromversorgung DC
- Versorgungsspannung 24 VDC
- Temperatursensor-Typ 1.000 Ohm Nickel-RTD
- Anzugsmoment 4,43 bis 5,31 lb-in (0,5 bis 0,6 Nm)
- Drahtstärke 26 bis 16 AWG
Supported Applications
The ACI Relative Humidity with Nickel RTD Outside Air Series is a transmitter designed for use in commercial heating and cooling building management systems. It monitors relative humidity and space temperature using an integrated capacitive sensing element and a Nickel RTD sensor.
- Commercial HVAC control applications
- Outside air monitoring
Operating Conditions & Performance
The series operates within a Relative Humidity range of 0 to 95% RH, non-condensing. The measurement output spans 0-100%. Accuracy specifications vary by selected model: +/- 1% over a 20% RH Range between 20 to 90%, or +/- 2% or 3% from 10 to 95%. Operating temperature is -40 to 140°F (-40 to 60°C), with storage capability up to 149°F (65°C). The typical response time (T63) is 20 seconds. Stability is rated at less than 2% drift over 5 years.
Configuration Options
Housings and Enclosures
- Euro (-EH): ABS Plastic, UL94-V0 rating; dimensions include a front view of 4.30" (109.22mm).
- NEMA 4X (-4X): Polystyrene Plastic, UL94-V2, NEMA 4X (IP 66) rating.
Sensors and Outputs
The series features a capacitive RH sensor with a hydrophobic filter. An optional Nickel RTD temperature sensor is available as part of the configuration. Output signals are field-selectable via integral DIP switches:
- 2-wire: 4-20 mA (Factory Default)
- 3-wire: 0-5 VDC or 0-10 VDC
Power and Connections
Screw terminal blocks accept wire sizes from 16 AWG to 26 AWG. Power supply requirements depend on the output configuration:
- 4-20 mA: 15 - 40 VDC / 18 - 28 VAC (Load dependent)
- 0-5 VDC or 0-10 VDC: 12 - 40 VDC / 18 - 28 VAC
Certifications and Options
The series carries CE, UKCA, RoHS, and WEEE approvals. Three-point NIST Calibration Certificates are available as an option.
Key Product Differences
Variants differ primarily by accuracy class (RH1 for +/- 1%, RH2 for +/- 2%, RH3 for +/- 3%) and enclosure type (-O for Euro, -4X for NEMA). Model numbers follow the format A/RH<Accuracy>-1K-NI-<Configuration>. The Nickel RTD sensor output is nominal 1 KΩ at 70°F (21.1°C) with Red/Red wire colors.
PDFs & Manuals
