France 0805 541 038 | Intl +31 01 57 32 48 17 | Bienvenue sur notre nouveau site web! Vous avez rencontré un problème ou un bug ? Veuillez le signaler ici.
SP-013-Series
Compteur/totalisateur numérique intelligent modulaire Omega Link M12 avec interface
Omega Link M12 Modular Smart Digital interface counter/totalizer
Modèles en stock
- Surveillance du taux d'impulsions, de la largeur d'impulsion, du cycle de service d'impulsion et du délai d'impulsion
- Compteur montant/descendant
- 2x E/S numériques
- Configuration logicielle via le logiciel de configuration SYNC
SP-013-Series
À partir de
€
161,62
Modèles en stock
Aper çu du produit
- Homologations CE, UKCA
- Configuration Configurable via Omega Link Smart Interface et logiciel de configuration SYNC
- Entrée numérique VinHighThreshold = 2,2 VMAX ; VinLowThreshold = 0,3 VMIN ; VinMAX = 30 VCC
- Sortie numérique 2x Drain ouvert 100 mA max, VMAX = 30 Vcc
- Caractéristiques nominales du boîtier IP67
- Signal de commande d'entrée Boucle de courant : 4 à 20 mA ; tension : 0 à 1,0 Vcc ; 0 à 2,0 Vcc
- Remarque sur l'entrée ON : 1,0 Vcc, OFF : 0,7 Vcc, Pull Up/Down interne : 1,5 k à 3,0 Vcc, Entrée comparateur (impulsion) : 100 mV, 500 mV, 1,0 Vcc, 2,0 Vcc
- Longueur 96.7 mm
- Nombre de canaux 1
- Nombre d'E/S 2
- Température de fonctionnement, max 85 °C
- Température de fonctionnement, min -40 °C
- ID de série SP-013-Series
- Logiciel Compatible avec OEG, SYNC et OMEGA Cloud
- Type d'approvisionnement électrique CC
- Tension d'alimentation 2,8 à 3,3 Vcc
- Largeur 22.1 mm
The Omega Link SP-013 Digital Interface Smart Probe provides an easy way to integrate digital pulse inputs to your Omega Link Ecosystem. The SP-013 accepts digital pulse inputs through its M12 5-pin connector and Omega Link Smart Interfaces through its M12 8-pin connector. The optional M12.5-S-M-FM connector can be utilized to easily connect wire leads to your SP-013.
The SP-013 may be configured to monitor the on/off state of the input signals, the pulse rate/ duty cycle of the primary input, or the pulse delay between the two signals. The pulse totalizing function supports both standard counting and up/down counting.
Edge Control and Built in I/O
The Omega Link SP-013 features 2 configurable digital I/O pins.These can be used for a myriad of applications including driving relays, physical alarms, or sensing dry contacts like door switches. The SP-013 can also be utilized as an edge controller, with autonomous independent decision-making capabilities to generate local alarms or provide control outputs based on sensor inputs.
Smart Core Enabled
Smart core is integral to all Omega Link Smart Probes. This powerful suite of advanced features enable plug and play connectivity, alarms and notifications, data assurance, data logging, and storage.
Smart Interface Modularity
Customize your Omega Link Ecosystem with modular Smart Interfaces that connect and transmit data from your Smart Probe to the Omega Link Cloud.
Intuitive Configuration
Configure your Omega Link Smart Probe using SYNC’s intuitive configuration interface.
Your Data at a Glance with Omega Link Cloud
Omega Link Cloud consolidates and brings your data to you when you need it, wherever you are. The intuitive cloud interface allows you to monitor and store your data, set alarms and alerts, and provides insights on device activity. Visit the OMEGA website for more details.
PDF & Manuels
Logiciels & Pilotes
Accessoires
cables
Connecteur droit M12 à 8 broches pour installation sur site avec bornes à vis
23,16 € / pièce
0 En stock
Répartiteur T blindé Smart Probe M12-8 broches - permet l'accès aux broches E/S
42,99 € / pièce
0 En stock
signal conditioners
Interface de sonde intelligente compatible Modbus vers série RS485
154,61 € / pièce
0 En stock