Skip to search Skip to main content Skip to navigation

Need assistance? Call us: 1-800-663-4209
  1. Home
  2. See Automation & Control
  3. See Switches & Relays
  4. See Relays
  5. Dual Solid State Relays 25 and 40 Amp Vdc Input/Vac Output
We noticed you are in , please visit your local site by clicking the below link for regional offers and support.
Stay here.
Go to the site >
Relè a stato solido doppi 25 e 40 Amp ingresso VCC/uscita VCA
Click and hold to zoom

SSRDUAL240

Dual Solid State Relays 25 and 40 Amp Vdc Input/Vac Output

Relè a stato solido doppi 25 e 40 Amp ingresso VCC/uscita VCA
Models In Stock
  • Two 25 or 40 Amp SSR’s in One Standard Package
  • Opto-Isolated 2500 VRMS
SSRDUAL240
From € 100,65 
Models In Stock
Shop Models
2 Variations available
See all series options below
SSRDUAL240Data Sheet

Data Sheet
Relè a stato solido doppi 25 e 40 Amp ingresso VCC/uscita VCA SSRDUAL240 SSRDUAL240
Product Overview
  • Current, Min 100 mArms
  • Dropout Voltage 1 Vdc
  • Features Dual Soild State Relays
  • Frequency 47 to 63 Hz
  • Housing Material UL 94V0 (self-extinguishing)
  • Input Control Signal 4 to 15 Vdc
  • Input/Output-to-Ground Isolation 2500 Vrms, 2500 V
  • Input Resistance 500 Ω
  • Input-to-Output Capacitance 8 pF
  • Isolated Analog Voltage 4000 Vrms
  • Leakage Current 0.1 mA
  • Leakage Current Note Off-State Leakage (@ Maximum Line Voltage and Ta = 25°C)
  • Measurement Current, Max 34 mA
  • Measurement Current, Min 7.5 mA
  • Number of Phases 1
  • Operating Temperature, Max 80 °C
  • Operating Temperature, Min -40 °C
  • Power Cycle Turn-On Time: 8.33 ms; Turn-Off Time: 8.33 ms; *Random SSR’s turn on in less than 100 µs
  • Series ID SSRDUAL240
  • Signal fail-safe 500 Vµs
  • Storage Temperature, Max 100 °C
  • Storage Temperature, Min -40 °C
  • Supply Voltage 24 to 280 Vac
  • Voltage, Max 550 V
  • Voltage Output 550 V
La serie di relè a stato solido OMEGA® SSRLDUAL è composta da due relè di uscita AC completamente indipendenti in un unico alloggiamento standard per montaggio su pannello. Utilizzano il design di uscita SCR in parallelo inverso di OMEGA con circuito snubber integrato dV/dt per fornire protezione contro inneschi falsi limitando la velocità di aumento della maggior parte delle transizioni di tensione entro limiti accettabili. L'accensione a tensione zero e lo spegnimento a corrente zero del carico commutato riducono sostanzialmente EMI e RFI.
en-US
it_IT
Save Configuration