Deutschland 07056-9398-0 | Internationale Rufnummer ++49 (0) 7056-9398-0 | Willkommen auf unserer neuen Website! Haben Sie einen Fehler oder ein Problem entdeckt? Bitte melden Sie es hier.
TSENSE-Series
Kohlendioxid-Sensor, Analog, Modbus oder BACnet, RH/TEMP, RELAIS
- Gewerbliche Bürogebäude
- Turnhallen
- Einkaufszentren
- Auditorien
- Theater
- Krankenhäuser & Schulen
- Bedarfsgesteuerte Lüftung & Wirtschaftlichkeitsregler
TSENSE-Series
Von
€
964,30
Produktübersicht
- Zusätzliche Merkmale 1 Wartungsfrei
- Kalibrierung Hinweis CO2-Kalibrierung 3: Senseair ABC-Algorithmus (Automatische Basiskorrektur)
- CO2-Messbereich 0 bis 2000 ppm
- Datenschnittstelle BACnet MS/TP, Modbus RTU
- Totband 100 ppm
- Diagnose Vollständige Funktionsprüfung
- Gehäusematerial ABS, Polycarbonat
- Hinweis zum Gehäusematerial Bayblend FR3000 (PC- und ABS-Mischung), Flammbarkeitsbewertung UL 94V-0
- Gehäuse-Nennwerte UL94 V-0
- Feuchtigkeitsmessbereich 0 bis 100 %
- Hysterese ±1 % bei 20 bis 80 % RF
- Installation 4-6 Fuß über dem Boden
- Länge 0.87 in
- Option für Materialkonstruktion keine
- Netzwerk und Kommunikation 0 bis 127 (Standard 104)
- Betriebsumgebung Wohn- und Geschäftsräume
- Betriebsfeuchtigkeit 0 bis 95 % relative Luftfeuchtigkeit, nicht kondensierend
- Betriebstemperatur, max. 122 °F
- Betriebstemperatur, min. 32 °F
- Ausgangsdetails Out 1 (CO2): 0 bis 10V, 0 bis 2000 ppm Out 2 (Temperatur): 0-10V, 32°F bis 122°F (0°C bis 50°C) Out 3 (RH): 0 bis 10V, 0 bis 100 % RH
- Leistungsaufnahme 2 W
- Druckabhängigkeit ±1,6 % pro 0,145 psi (1 kPa) Abweichung vom Normaldruck (1 Atmosphäre = 14,7 psi (1,013 kPa))
- Wiederholgenauigkeit ±00.45°F bei 63 bis 82°F (±0.25°C bei 17 bis 28°C); ±0.25% RH bei 63 bis 82°F (±0.25% RH bei 17 bis 28°C)
- Auflösung 10 Bit, 10 mV/Schritt, 0,1 % Schritte des gesamten ppm/°C/%RH-Bereichs
- Reaktionszeit <3 Minuten Diffusionszeit
- Messverfahren Einzelstrahl-Nichtdispersiver Infrarot-Sensor (NDIR)
- Lebensdauer des Sensors 15 Jahre (typisch)
- Serien-ID TSENSE-Series
- Software CO2 (Standard) / Temperatur/Luftfeuchtigkeit konfigurierbar über Touchscreen oder UIP5-Software
- Lagertemperatur, max. 158 °F
- Lagertemperatur, min. -22 °F
- Versorgungsspannung 12 VDC, 24 VAC/VDC
- Auslösepunkt Hinweis Relais-Auslösepunkt (CO2): 1000 ppm (werkseitig eingestellt)
- Nullpunktdrift ± 0,3 %
Supported Applications
The ACI TSENSE series is a wall-mountable transmitter designed for measuring indoor air carbon dioxide (CO2) concentration, temperature, and relative humidity in residential and commercial spaces. The unit connects to Direct Digital Control (DDC) systems via analog outputs or communication protocols. Documented applications include energy efficiency strategies in commercial office buildings, hospitals, hotels, schools, and other facilities requiring indoor air quality monitoring.
The series incorporates non-dispersive infrared (NDIR) technology for CO2 sensing and complies with ASHRAE 189.1 standards as well as CA Bill 841 requirements to support healthy occupant environments.
Operating Conditions & Performance
The TSENSE series operates within an ambient temperature range of 32°F to 122°F (0°C to 50°C) and a relative humidity environment of 0-95% RH non-condensing. Storage temperatures are rated from -22°F to 158°F (-30°F to 70°F). The device requires a supply voltage of 12 VDC or 24 VAC/VDC (±20%, half-wave rectified, 50-60 Hz), with power consumption under 0.35W average for the non-display version and less than 0.6W for the display version.
Performance specifications include:
- CO2 Measurement Range: 0 to 2000 ppm (standard) or optional 0 to 3000 ppm.
- Temperature Range: 32°F to 122°F (0°C to 50°C).
- RH Measurement Range: 0-100% RH.
- CO2 Accuracy: ±50 ppm @ 1000 ppm, 63°F to 82°F (17°C to 28°C); typical full range accuracy is ±30 ppm ±3% of reading.
- Temperature Accuracy: ±0.9°F (@ 63 to 82°F / ±0.5°C @ 17 to 28°C) and ±1.8°F (@ 32 to 122°F / ±1.0°C @ 0 to 50°C).
- RH Accuracy: ±5% @ 20 to 80% RH.
- Response Time (T1/e): <3 minutes for CO2; <6 minutes for temperature and RH at an air velocity of 0.15m/s.
- Pressure Dependence: ±1.6% per 0.145 psi (1 kPa) deviation from normal pressure (1 Atmosphere = 14.7 psi / 1.013 KPa).
The CO2 sensor utilizes the Senseair ABC algorithm for Automatic Baseline Correction, with a typical sensor life exceeding 15 years.
Configuration Options
The series offers configurable output signals and communication protocols to suit various control system requirements. Standard analog outputs are pre-programmed as linear 0-10 VDC signals for CO2, temperature, and relative humidity on terminals OUT(1), OUT(2), and OUT(3). Alternative output ranges can be configured using PC software (UIP version 5 or higher) via a USB communication cable.
Output & Communication Options:
- Analog Voltage Output: 0 to 10V, R out <100Ω, Load >5KΩ with 10-bit resolution (10mV/steps).
- Digital Protocols: Modbus RTU or BACnet MS/TP.
- Relay Output: Form C, SPDT rated at 1A @ 50 VAC / 24 VDC. The relay trip point is factory set to 1000 ppm CO2 with a deadband/hysteresis of 100 ppm; the input source can be configured via touchscreen or software.
- Baud Rates: 9600, 19200, 38400, 57600, 76800, 115200 for communication protocols.
Housing & Physical Configuration:
- Enclosure Material: Bayblend FR3000 (PC & ABS blend) with a flammability rating of UL 94V-0.
- Dimensions: 4.92" (125 mm) H x 3.35" (85 mm) W x 0.87" (22 mm) D.
- Electrical Connections: Screw terminals compatible with 0.00232 in² (1.5 mm²) wire.
Display & Configuration:
- TSENSE-LCD models feature a configurable color touch display showing CO2 (PPM), Temperature, and Humidity (%RH). Settings can be adjusted via the touchscreen or using the TTL-232R-3V3-AJ programming cable.
- Standard TSENSE models without an LCD require the TTL-232R-3V3-AJ programming cable and UIP5 software for configuration, BACnet/Modbus setup, or setting changes.
Key Product Differences
The series is available in two primary configurations distinguished by display capability:
- TSENSE-LCD (Item #135458): Includes a touch screen menu for local configuration and monitoring. Weight: 0.414 lbs (0.188kg).
- TSENSE Standard (Item #135459): No display; requires external programming cable for all settings adjustments. Weight: 0.361 lbs (0.166kg).
Additional options include Custom Calibration (Item #140970) and the USB to Serial Programming Cable, TTL-232R-3V3-AJ (Item #137011). The series supports a maximum coverage area of 7500 sq. ft., with recommended mounting heights between 4-6' off the floor.
PDFs & Handbücher