España 800 900 532 | Fuera de España +34 911 776 121 | Bienvenido a nuestro nuevo sitio web. ¿Encontró algún problema o error? Por favor, infórmelo aquí.
Balco-Bullet-Probe
Balco Bullet Probe
Balco Bullet-Sonde- Dachgeräte
- Fortluft-/Zuluft-/Abluft-/Mischluftkanaltemperatur
- Fernfühler für Temperatur
Balco-Bullet-Probe
Desde
Resumen del Producto
- Genauigkeit 70 °F (21,1 °C): +/- 1 %
- Legierungsmaterial (-) Kupfer
- Legierungsmaterial (+) Kupfer
- Anwendungen Luft- und Klimatechnik, Bauwesen und Zollstandhaltung, Umweltüberwachung
- Kalibrierungsoption N/A
- Elektrischer Anschluss Pigtail-Kabel
- Einbaulänge 1 in
- Isolationsfarbe Orange, GePfund
- Anzahl der Messpunkte 1
- Betriebsstrom 5 mA
- Betriebsfeuchtigkeit 10 bis 95 % rF, nicht kondensierend
- Betriebstemperatur, max. 121 °C
- Betriebstemperatur, min. -40 °C
- Ausgangsdetails Sensor-Ausgang bei 70ºF (21,1ºC)
- Sondendurchmesser 0.25 in
- Sondenlänge 1 in
- Reaktionszeit 8 Sekunden nominal
- Serien-ID Balco-Bullet-Probe
- Mantelwerkstoff Edelstahl 304
- Stabilität +/- 0,05 % nach 1000 Stunden bei 150ºC (302ºF)
- Lagertemperatur, max. 85 °C
- Lagertemperatur, min. -40 °C
- Temperaturkoeffizient 4618 ppm/°C
- Temperaturmessbereich -40 bis 121 °C
- Temperatursensor-Typ 1 kOhm Balco-Widerstandsthermometer
- Gewicht 0.02 lb
- Drahtstärke 22 AWG
Supported Applications
The ACI Balco Bullet Probe is a temperature sensor designed for use with electronic controllers in commercial heating and cooling building management systems. The bullet style sensor monitors air temperatures and should not be fully submerged in water.
- Air temperature monitoring in HVAC applications
Operating Conditions & Performance
The series operates within a process temperature range of -40 to 121°C (-40 to 250°F) and an ambient humidity range of 10 to 95% RH, non-condensing. The storage temperature range is specified as -40 to 85°C (-40 to 185°F). Performance characteristics for the Balco RTD sensor include:
- Sensor Output: 1000 Ohms nominal at 70°F (21.1°C)
- Accuracy: +/- 1% at 70°F (21.1°C)
- Response Time (63% Step Change): 8 Seconds nominal
- Sensor Stability: +/− 0.05% after 1000 Hours @ 150°C (302°F)
- Maximum Operating Current: 5 mA
Configuration Options
The ACI Balco Bullet Probe features a one-inch stainless steel probe with two, non-polarity sensitive wires. The sensor is manufactured using a double encapsulation process to eliminate moisture effects and increase thermal response times.
Sensor Elements & Output
- Element Type: Balco RTD (PTC - Positive Temperature Coefficient)
- Nominal Resistance: 1000 Ohms at 70°F (21.1°C) with Orange/Yellow lead wire colors
- Temperature Coefficient (0-100°C): 4618 ppm/°C
Housing & Materials
- Probe Material: 304 Stainless Steel
- Product Dimensions: 1.00" (25.4mm) length x 0.250" (6.35mm) diameter
- Lead Wire Insulation: Etched Teflon Colored Leads rated MIL-W-16878/4 (Type E)
- Conductor Material: Silver Plated Copper, 22 AWG (0.65mm)
Mounting & Accessories
The series supports wall mounting using a ¼" Mounting Clip or adhesive U-Mounting Clip options.
- A/MOUNTING CLIP-1/4": Hardware, ¼" Mounting Clip (Galvanized Metal)
- A/MOUNTING U-CLIP-1/4": Hardware, ¼" U-Mounting Clip Adhesive (Plastic w/ Adhesive)
Approvals
The series carries CE, RoHS2, and WEEE approvals. Note that the 20' Length variant is not CE Compliant but remains RoHS Compliant.
Key Product Differences
Variants within this series differ primarily by lead wire length and cable rating options:
- A/BALCO-BP: Standard configuration with 24" (61.0 cm) Etched PTFE Colored Leads.
- A/BALCO-BP-10'CL2P: Features 10 ft (3.05m), 2 Conductor Plenum Rated Cable.
- A/BALCO-BP-20'CL2P*: Features 20 ft (6.10m), 2 Conductor Plenum Rated Cable; this length is not CE Compliant.
PDFs y Manuales
