1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
OSAO-Series
Adjustable Output IR Sensor High Temperatures and Display
- High measurement temperatures up to 1800 °C (3272 °F)
- Many fields of view options, 2:1,15:1, 20:1, 40:1 and 80:1
- Features a built-in LCD display with keypad
- User selectable options for analog outputs and USB 2.0 digital
OSAO-Series
From
€
1.072,41
Product Overview
- Cable Length 3 m
- Control Output Relay Output with hysteresis 60V DC/42V AC RMS,0.4A
- Data Interface USB
- Display Yes
- Emissivity, Min 0.1
- Enclosure Ratings IP65
- Housing Height 33 mm
- Housing Length 112.5 mm
- Housing Width 82.5 mm
- Intrisically Safe No
- Isolation Power supply, *Digital output and Analog output are galvanically isolated * Not applicable for USB 2.0 digital output
- Operating Temperature, Min 0 °C
- Power Consumption 2.5 W
- Relative Humidity, Max 0.95
- Relay Output 60 Vdc
- Spectral Response, Min 8 μm
- Storage Temperature, Max 70 °C
- Storage Temperature, Min -20 °C
- Supply Voltage 12 to 28 Vdc
- Weight 600 g
The OSAO-Series high temperature IR sensors are designed to offer peak performance over a wide range of temperatures. The integrated LCD display offers a convenient way to adjust the settings and measure the temperature. The display is capable of setting various parameters like emissivity, analog sub range, set point, hysteresis, analog output, temperature unit, response time, peak picker, sensor address, and more!
The integrated laser targeting light (AO250 Models) and optional mounting accessory significantly speed up installation. Accessories like the Water Cooling Jacket (with air purge) and Air Purge Unit-Sensor Head allow the sensor to be installed in varying environments. If the ambient temperature is over 70 °C (158 °F) or lots of dust can build up on the sensor head then these accessories become more of a necessity. If ambient temperatures are over 120 °C (248 °F) then the AO50H Model with an ambient temperature rating up to 180 °C (356 °F) is a perfect solution.
The OSAO-Series sensors have adjustable emissivity and can measure many different surfaces such as Iron and Steel, Lead, Marble, Brick, Asphalt, and many more!
PDFs & Manuals
Software & Drivers
Calibration
Accessories
accessories
installation hardware
signal conditioners
This is a converter for the OSAO-Series IR sensors to convert signals from RS-232 to RS-485 or RS-485 to RS-232.
0 In Stock