Data Converters

The OM-CONV-USB USB to serial I/O converter provides a single USB to RS-232 serial port providing USB connectivity to non-USB compliant devices.

The I-7561 is a cost-effective module for transferring serial data via USB 1.1/2.0 (High Speed), 3000 VDC Isolation Protection on the RS-232/422/485.

The DCP-485 is a compact RS-232- to-RS-485 converter which features a complete electrical isolation barrier and heavy duty electrical surge protectors.

The IF-001 Interface cable enables easy configuration and monitoring for any Omega Link Smart Probe and a Modbus RTU or Modbus ASCII interface to all smart sensor registers.

OM-ES-511/OM-ES-522 are software selectable RS232, RS422/485 full duplex, RS422 half duplex and have removable screw terminals blocks for easy wiring, a slim DIN rail mount.

The A1000 and A2000 signal converters allow users to establish an effective data acquisition system over long distances, to 4,000 feet, driving 32 Modules.

The I-7513 is a 3-ch RS-485 Active Star Wiring Hub, 3000 VDC Three Way Isolation, Auto Switching Baud Rate, 300 to 115,200 bps, DIN-Rail Mountable.

The Macurco MRS-485 adapter is an accessory used to convert the 4-20mA analog signal from Macurco 6-Series type detectors to a digital signal for use with multipoint addressable systems. The Macurco MRS-485 simply plugs into the back of the detector and a single screw fastens it in place. The MRS-485 accepts the 4-20mA output and is powered from the same connection as the detector.

Most industrial computer systems provide standard RS-232 serial ports, 3kV Isolation, Auto Switching Baud Rate, 300 to 115,200 bps, DIN-Rail Mountable.

The OM-ES-020 Ethernet 10/100Base to serial device server is ideal for industrial applications, Non-Windows Users, Maximum Baud Rate 1,000,000 (1 MegaBaud) .

The rugged IF-002 integrates any Omega Link Smart Probe into a Modbus network. It provides a RS485 serial interface that supports Modbus RTU and a command line interpreter.

The Macurco BRS-485 Adapter is an accessory used to convert the 4-20mA analog signal from Macurco 6-Series type detectors to a digital signal for use with multipoint addressable systems. This device connects to the back of the detector, and a single screw fastens it in place. The BRS-485 accepts the 4-20mA output and is powered from the same connection as the detector. It can interface with Building Automation Systems, control panels, or other control devices that accept Modbus, BACnet, Metasys, and Siemens communication protocols.