Control Valves

The SVH-110 Series are used to control the flow of high pressure air, water, hydrogen, nitrogen and other gases or light liquids compatible with materials of construction.

SV-3300 Series 2-way solenoid valves are direct-acting valves featuring brass, construction and FKM seal material. The temperature range from 14 to 280°F

The SVH-130 Series is a compact size for where space is limited and is ideal for flow control of high pressure air, water, CNG, hydrogen, nitrogen, and other gases

Two-way solenoid valves for most industrial applications. It has two ports, an inlet and an outlet. A normally closed valve does not pass fluid unless it is energized.

The SV-3500 Series 2-way zero differential solenoid valves are internally piloted valves featuring Brass construction and NBR and PA seal material ideal for neutral media.

SV3200 Series 2-way solenoid valves are direct-acting valves featuring stainless steel construction and PTFE seal material.

The SV4000 Series 2-way hot water and steam solenoid valves are internally piloted. They feature brass and 316 stainless steel construction, and PTFE seal material.

The SV130 Series direct-acting solenoid valves are normally open. In a normally open valve, a plunger return spring holds the plunger away from the orifice, allowing flow.

The SV6000 Series 2-way, normally closed solenoid valves are pilot operated brass body with FKM seal material.

SV-3100 Series 2-way solenoid valves are direct-acting valves featuring brass and stainless steel construction and FKM seal material.The temperature range of 14 to 280°F

FVLT100 PTFE needle valves are designed for laboratory and industrial applications for regulating corrosive gases and liquids or for high purity service.

The SV4100 and SV4300 Series are direct acting solenoid valves that have a brass body and a FKM seal material ideal for neutral media such as compressed air, inert gas, water

The economical PV100 Series combines a solenoid valve and electronics that provides an analog proportional control of gases

Discover our Needle Valves for Precise Flow Control, featuring a durable hot-forged brass body. Ideal for achieving accurate flow regulation in various applications.

The FSV10 Series proportioning valves with a pulsed driver electronic solenoid can precisely control the flow of a wide variety of gases and liquids

The PV14 series of electronic proportioning valve takes an electrical input signal and adjust the flow through a pipe from fully closed to fully open.

SV-3321 2-way solenoid valve is a high pressure direct acting valve featuring brass construction and PTFE seal material.

Butterfly Valve is an ideal low cost hydraulic reservoir shut off valve. Designed to meet the demanding needs of the fluid power industry

The AAV-1100 Series of 2-way, NC, pilot operated 316L SS angle seat valves are ideal for use in a wide range of industrial applications with a wide range of fluids.

Three-Way Detachable Zone Valve is ideal for flow control in hot and cold water HVAC systems. Used in conjunction with a thermostat to control room temperature.