Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
Series-HBAV
HVAC Electrical Ball Valve – Flow Control for Hot/Cold Water, AC Motor
- Manual override
- Detachable actuator
- High Cv values
Series-HBAV
From
TWD
15,026
Product Overview
- Enclosure Ratings IP10, NEMA Type 1
- Materials, Wetted Brass, Buna-N (NBR), PTFE, Stainless Steel
- Media Compatibility Clean dry air / inert gas, Clean process / cooling water, Compatible Liquids, Inert / non-reactive gases, Oils / lubricants, Organic solvents, Water
- Operating Temperature, Max 158 °F
- Operating Temperature, Min -22 °F
- Port 1 Type NPT Female
- Port 2 Type NPT Female
- Pressure Limits Up to 375 psi
- Pressure Limits Note Max: 375 psi (25 bar); Close off: 87 psi (6 bar)
- Process Temperature, Max 122 °F
- Process Temperature, Min 23 °F
- Series ID Series-HBAV
- Supply Power Note 120 Vac or 24 Vac, 50/60 Hz, single phase
- Supply Power Type AC
- Valve Position Normally Closed
- Valve Type 2-way
- Wire Gauge 18 AWG
Supported Applications
The Dwyer Series HBAV is an electrical ball valve designed for flow control in hot and cold water HVAC systems. The product overview identifies typical use cases including air conditioning systems, heating systems, water treatment facilities, and production industries.
Operating Conditions & Performance
The series operates within specific ambient and process temperature limits while maintaining defined pressure ratings across its size range.
- Ambient Temperature: -22 to 158°F (-30 to 70°C)
- Process Temperature: 23 to 122°F (-5 to 50°C)
- Pressure Limits: Max: 375 psi (25 bar); Close off: 87 psi (6 bar)
- Cycle Time (per 90°): Sizes 1/2 to 1": 45 sec.; sizes 1-1/4 to 2": 50 sec.
- Enclosure Rating: NEMA 1 (IP10)
The valve body is a 2-way, normally closed (NC) design with wetted materials consisting of Brass, SS, NBR, and PTFE. The series supports compatible fluids as the designated service media.
Configuration Options
The Series HBAV offers configurable options for line size, supply voltage, input type, and actuator function to accommodate specific installation requirements.
- Line Size: 1/2" to 2" NPT with Female NPT end connections
- Supply Voltage: 120 VAC or 24 VAC, 50/60 Hz, single phase
- Input Types:
- Floating: 3-wire input
- Modulating: 4 to 20 mA (requires 24 VAC power only)
- Housing Material: Plastic, nylon, and polyoxymethylene
- Electrical Connection: 18 AWG
The actuator is electrically driven via a bidirectional AC motor. Features include a detachable actuator with position switches and an indicator.
Key Product Differences
Variants within the series are distinguished by size, voltage rating, and input configuration (Floating vs. Modulating). The model number guide follows the format HBAV<Size><Voltage><Input Type>.
- Floating Actuators: Available in 120 VAC or 24 VAC configurations for sizes 1/2" through 2".
- Modulating Actuators: Restricted to 24 VAC power supply. The model selection table lists modulating options (e.g., HBAV0224, HBAV0324) specifically for sizes 1/2", 3/4", and 1".
Physical dimensions vary by size; for example, the overall length (Dimension C) ranges from 4.53 [115] mm for 1/2" to 5.31 [135] mm for 2" sizes. Modulating models in sizes 1/2" through 1" include an electric cord attached on the outside, while modulating models in sizes 1-1/4" through 2" contain a 4-wire terminal block.
PDFs & Manuals
