Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
SVH-110-Series
2-Way, NO, NC, 316 SS, Low Flow Very High Pressure Solenoid Valves
- Stainless Steel Construction
- NEMA 4 and 7
- Pressures up to 10,000 psi (Depending on Model)
SVH-110-Series
From
TWD
38,349
Product Overview
- Duty Cycle 100%
- Electrical Connection 1/2 in NPT female Conduit with Wire Leads
- Electrical Connection Note 1/2 NPT, 457 mm (18") leads
- Enclosure Ratings NEMA Type 4, NEMA Type 7
- Materials 316 Stainless Steel, FEP, 303 Stainless Steel, 302 Stainless Steel, 430 Stainless Steel
- Materials, Wetted 303 Stainless Steel, 316 Stainless Steel, 430 Stainless Steel, FEP
- Media Compatibility Clean dry air / inert gas, Clean process / cooling water, Compatible Liquids, Inert / non-reactive gases, Oils / lubricants, Organic solvents, Water
- Media Type N/A
- Orifice Size N/A
- Process Connection Size 1/4 in
- Process Connection Type NPT Male
- Process Temperature, Max 204 °C
- Process Temperature, Min -212 °C
- Series ID SVH-110-Series
- Valve Type Direct Acting
- Weight 48 oz
The SVH-110 Series direct acting solenoid valves are normally closed valves that open when energized and close when de-energized. When the coil is energized the plunger lifts the piston off the valve seat, opening the valve. Upon de-energizing the coil, a spring closes the piston to seat it. The normally open valve operates similarly, closing when energized and opening when de-energized. No minimum pressure is required. The SVH-110 Series are used to control the flow of high pressure air, water, hydrogen, nitrogen and other gases or light liquids compatible with materials of construction. They are also suitable for cryogenic applications.
PDFs & Manuals
