1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
SRMU-HEATER
Silicone Rubber Flexible Heater Blanket 450 °F Max
Modèles en stock
- Flexible and durable
- Continuous exposure to temperatures up to 232°C (450°F)
- Wide variety of sizes and shapes
- Protection rated IP66 to handle various environments
SRMU-HEATER
Depuis
C$
39.28
Modèles en stock
L'aperçu du produit
- De-energized Exposure Temperature, Max 260 °C
- Dielectric Strength > 2000 V
- Heater Material Fiberglass Reinforced Silicone Rubber
- Heater Material Note Laminated between two layers of, 15 mil, fiberglass reinforced silicone rubber
- Lead Length 30.48 cm
- Lead Length Note 30.48 cm (12") PFA standard (additional length available)
- Operating Temperature, Max 232 °C
- Operating Temperature, Min -51 °C
- Silicone Rubber Density 16.8 oz/yd² per layer
Environmental factors of many industrial heating applications require a product with the ability to withstand chemicals, moisture and abusive treatment. These same applications also require rapid heat up, steady temperature maintenance, and uniform heat distribution. For applications such as these, OMEGA silicone rubber heating blankets are the best products available.
OMEGA silicone rubber heating blankets are used for freeze protection, process temperature control, melting of solids, temperature heat-up or maintenance. Whether installed in Original Equipment or in the field, our silicone heaters will provide the durability required.
OMEGA silicone rubber heating blankets are used for freeze protection, process temperature control, melting of solids, temperature heat-up or maintenance. Whether installed in Original Equipment or in the field, our silicone heaters will provide the durability required.
PDF et manuels
Afficher les notes et les avis
Rated 5 out of
5
by
Dearth Custom Guitars from
Custom wood bending
I’m using these heaters to bend thin woods for acoustic guitar sides. They are excellent and provide quick and even heat to these expensive woods.
Date published: 2020-07-05
I am looking for a heat jacket for a column. When this product diameter says 6" is that a firm 6" or is there some leeway on that diameter?
Hi - We do have a tolerance of +/- 1/8" on all designs. If you need any further assistance, please contact our Tech Support. Thank you.
Date published: 2019-01-11
What is the lead length for the SRMU heaters?
Thank you for the inquiry. Lead length is 12 inches.
Best regards
OMEGA
Date published: 2020-04-22
If I wire 2 110V heaters in series on a 220V line, will I get the same output wattage per square inch?
Hi Colt,
Thank you for the inquiry.
The 2 heaters would have to have to be identical in total power and total resistance rating. Else one heater will run hotter then the other.
Best regards,
OMEGA
Date published: 2022-03-30
I need to keep the water that gets trapped in a 3/4" ball valve when closed from freezing. Will the SRMU050102-P work? The ball valve is brass, but has some plastic parts. Will I need a thermostat? Will your FTG305 work?
Thank you for your inquiry. Please send your application requirements to heaters@omega.com and we can review and advise.
Date published: 2020-12-09