1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
CL3515R-Series
Rugged 11 Thermocouple type & mV Calibrator Thermometer
- USB and RS232 Interface with Windows Software
- 11 Types of Thermocouples: K, J, T, E, R, S, N, L, U, B, and C (in °C, °F, or K), and mV Signal Output
- NIST-Traceable Calibration Certificate with 7 Data Points (Included)
- 2 Channels for Thermocouple Temperature Measurement (T1 and T2) with Offset Adjustment
CL3515R-Series
From
$
525.61
Product Overview
- Accuracy ± 0.05 %
- Accuracy Detail ± (0.05% of reading + 0.5 °C)
- Additional Features 1 NIST Calibration Certificate
- Battery life 17 hr
- Display Type LCD
- Display Type Note 4-digit LCD with maxreading of 19999
- Electrical Connection Miniature Female Thermocouple Connector
- Height 192 mm
- Length 52.5 mm
- Milli Volt Accuracy ± 0.025% + 1 digit
- Milli Volt Resolution 10 µV
- Millivolt Range -25 to 75 mV
- Number of Channels 2
- Operating Temperature, Min 0 °C
- Relative Humidity, Max 0.7
- Relative Humidity, Min 0%
- Series ID CL3515R-Series
- Storage Temperature, Max 60 °C
- Storage Temperature, Min -20 °C
- Storage Temperature Note -20 to 60°C (-4 to 140°F ),<70%RH
- Supply Voltage 9 Vdc
- Temperature Coefficient 0.1 times the applicable accuracy specification per °C from 0 to 18°C and 28 to 50°C (32 to 64°F and 82 to 122°F)
- Temperature Measurement, Max 2316 °C
- Temperature Measurement, Min 0 °C
- Thermocouple Simulation Resolution Range Thermocouple Simulation Range: Resolution: 0.1° (1° for R/S/B/C); Accuracy*: ± (0.3°C + 10 µV)
- Thermocouple Type J, K, T, E, R, S, B, C, N, L, U
- Type of RTD Signal None
- Weight 320 g
- Width 91 mm
The CL3515R is a portable calibrator/thermometer with a 4-digit LCD. It is designed to use external K/J/T/E/R/S/N/L/U/B/C type thermocouples as temperature sensors. OMEGA offers a complete selection of thermocouples, or we can custom-design parts to meet your specs. The thermometer features a dual thermocouple input and an adjustable thermocouple offset. The thermocouple types comply with the NIST monograph 175, revised to ITS-90 standards.
PDFs & Manuals
Accessories
accessories
So ft carrying case for HH500 series
$20.20 / each
0 In Stock
cables
Retractable Sensor Cables for Thermocouples, RTDs and Thermistors
$44.31 / each
6 In Stock
Retractable Sensor Cables for Thermocouples, RTDs and Thermistors
$44.31 / each
9 In Stock
Retractable Sensor Cables for Thermocouples, RTDs and Thermistors
$41.06 / each
18 In Stock
Retractable Sensor Cables for Thermocouples, RTDs and Thermistors
$42.73 / each
8 In Stock
sensors
Show Ratings & Reviews
Rated 2 out of
5
by
Arnold from
OK Quality 2 channel calibrated unit
We bought this because it is calibrated. Seems susceptible to EMI. The HVAC system combined with other adjacent CE compliant test equipment cause this to fail the self test. Other thermometers and test equipment do not fail under the same conditions. It is good that it reports the errors, but it would be nice if it was more robust. Good tech support to identify EMI as the cause.
Date published: 2017-06-27
Rated 1 out of
5
by
Facilities guy from
Does not work with Windows 10
This product will not work with Windows 10 and no relief in sight...
Date published: 2018-12-06
Rated 4 out of
5
by
bhelmet from
Meets my needs
I still have a lot to learn about all the capabilities of this equipment, but it works for my calibration needs. I would like to see more documentation on the capabilities and how to use them. What I have seen thus far is a bit lacking for me. I haven't had the opportunity to play with it outside of performing my calibrations. However, it is great for my calibration needs
Date published: 2018-10-25
Rated 5 out of
5
by
Erich from
Impressive Accuracy
I have purchased 3 of these over the past couple of years for training customers on properly performing SAT's and they work great. They are every bi as accurate as $2,000 calibrators we have used in the past and they handle a wide range of thermocouples.
Date published: 2017-10-10
Rated 1 out of
5
by
Harvey from
Rarely in specification
Always having to adjust and issuing out of tolerances. Get what you pay for, buy a Fluke.
Date published: 2019-10-08
Rated 4 out of
5
by
Advance Electric CoInc from
I is easy to use and fast too, It makes works
It is easy to use and fast too, It makes works simple
Date published: 2025-10-30
Rated 4 out of
5
by
Superstar from
Great!!
Great customer service and fast delivery. Just what we needed.
Date published: 2025-10-13
Rated 5 out of
5
by
Iain C from
1
works as intended to calibrate plc cards. Easy to use.
Date published: 2025-01-24