G-Series-3-A

Supported Applications

The Omega G Series Sanitary Clamp High Temperature (SIP) Precision Turbine Meters are volumetric flow measurement devices designed for sanitary applications. The series meets 3-A Sanitary Standards via the Third Party Verification (TPV) program and is suitable for Clean in Place (CIP), Steam in Place (SIP), and Clean Out of Place (COP) requirements.

Documented application areas include:

• Food & Beverage
• Pharmaceuticals
• Petro Chemicals
• Fuel
• Batching and Process Control
• Chemical Feed Lines
• Irrigation
• High Water Volume Mixing
• Thin Viscosity Fluids Under 100 Centipoise

Operating Conditions & Performance

The GSCPS series operates within a process temperature range of -100° F to 225° F (-74° C to 107° C). For SIP cleaning, the internal components are limited to less than 285° F (140° C) for up to 1 hour. The pressure rating is defined as "Limited by fitting size, clamp size and temperature."

Performance specifications include an accuracy of ± 0.5% linearity and repeatability of ± 0.1%. The output signal frequency ranges from 100 - 1000 Hz across all sizes.

Configuration Options

The series is available in three meter sizes: 1", 1-1/2", and 2" with Sanitary Clamp fittings. Each size offers a standard profile or a low-profile adapter option (indicated by the "L" suffix, e.g., -100L).

Wetted Materials

• Housing: 316 Stainless Steel
• Bushings & Bearings: PEEK
• Shaft: 316 Stainless Steel
• Rotor: CD4MCu Stainless Steel
• Rotor Supports: 316 Stainless Steel
• Retaining Rings: 300 Series Stainless Steel

Flow Ranges by Size

• 1" (Model -100): 6.7 - 67 GPM (25 - 252 L/min)
• 1-1/2" (Model -150): 17.7 - 177 GPM (67 - 670 L/min)
• 2" (Model -200): 33 - 330 GPM (125 - 1250 L/min)

Accessories and Electronics

The series supports optional weather-proof enclosures in Zinc or Stainless Steel, Remote Electronics (F Series), and adapter kits for QS displays. Calibration reports come standard with G Series meters; N.I.S.T. certification is available.

Key Product Differences

Variants are distinguished by meter size and profile height:

• Standard Profile (GSCPS): 1" models measure 3.56 in (90 mm) length x 1.84 in (47 mm) height; 2" models measure 6.06 in (154 mm) length x 2.39 in (61 mm) height.
• Low Profile Adapter: Reduces the vertical footprint, with 1" low-profile units measuring 1.03 in (26 mm) height and 2" units at 1.45 in (37 mm) height while maintaining standard lengths.

The model number guide follows the format G - FITTING TYPE - SHAFT / SLEEVE BEARING / THRUST BEARING - TURBINE SIZE & FLOWRATE, such as "G SC PS -150" for a 1-1/2" Sanitary Clamp Stainless Steel meter.