1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
PHE-45P
Choose a Variant
Supply Voltage
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Additional Features 1 | Sensor |
| Cable Length | 3 m |
| Cable Type | Insulated Shielded |
| Electrical Output | 4 to 20 mA |
| Flow Indication Note | 3 m/sec Max |
| Impedance Input | Greater than 1013 Ω |
| Materials, Wetted | 316 Stainless Steel, Ceramic, EDPM, FKM, Glass, PEEK, Titanium |
| Measurement Pressure, Max | 100 psi |
| Measurement Pressure, Min | 0 psi |
| Measurement Type | pH, ORP |
| Mounting | 1 NPT convertible |
| Non-Linearity | ± 0.1 % |
| Operating Temperature, Max | 95 °C |
| Operating Temperature, Min | -5 °C |
| PH Measurement Range | 0 to 14.00 pH |
| Repeatability | 0.1% of or better |
| Response Time | 4 seconds to 90% of step input at lowest setting |
| Sensitivity | 0.002 pH |
| Sensitivity Note | 0.002 pH, 0.2 mV (ORP) Displayed Parameters: 0.05% of span |
| Sensor Temperature, Max | 110 °C |
| Sensor Temperature, Min | -10 °C |
| Sensor Voltage | ±500 mV |
| Stability | 0.02 pH |
| Stability Note | 0.02 pH or 2 mV per 24 hours, non-cumulative Displayed Parameters: 0.1% of span per 24 hours, non-cumulative |
| Supply Power Effects | ± 0.05% span |
| Supply Voltage | N/A |
| Temperature Drift | Span or zero, 0.02% of span/°C |
| Transmission Distance | 9.1 m no preamp, 914 m with preamp |
| Warm Up Time | 4 sec |
| Weight | 0.45 kg |
| See All Specs | |
PDFs & Manuals
Accessories
Signal Conditioners for Buffer kit accessory - 4,7,10 Capsules(2 of each)
0 In Stock
Show Ratings & Reviews