Singapore 1800 622 1156 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
TFPS-Th-Series
Thin Film Point Sensitive Thermistor Sensor
박막 점 감지 서미스터 센서- 얇고 유연한 비침습형 서미스터
- 빠르고 정확한 응답
- 폴리이미드, 실리콘 고무, Mylar™ 절연
- 방수 구조
Product Overview
- 정확도 ± 1%
- 정확도 세부 사항 ± 1% @25 °C
- 접착식 백킹 PSA
- 전기 연결 리드 제거
- 단열 PFA
- 리드 길이 40 in
- 명목상 저항 10000 Ω
- 와이어 수 2
- 공정 온도, 최대 125 °C
- 최소 공정 온도 -50 °C
- 센서 높이 0.079 in
- 센서 길이 0.47 in
- 센서 폭 0.2 in
- 시리즈 ID TFPS-Th-Series
- 시간 상수 0.8 s
- 와이어 게이지 26 AWG
Supported Applications
The Omega TFPS-Th Series Thin Film Point Sensitive Thermistor Sensor is designed for accurate point temperature sensing in non-invasive applications. The series supports installation on surfaces where fast response and sensitivity to small temperature changes are required, including aerospace, medical, and industrial devices.
Operating Conditions & Performance
The TFPS-Th Series operates within a process temperature range of -50 to 125°C (-58 to 257°F). The sensing element utilizes an NTC thermistor with resistance values of either 50kΩ or 10kΩ, both specified at ±1% accuracy at 25°C. Response times vary by insulation type: models with polyimide and elastomer coating (TFPS-Th-PE) exhibit a time constant of 0.8 sec., while silicone rubber/foil backed versions (TFPS-Th-SRE) show a time constant of 1.3 sec.
Configuration Options
The series offers configurable options for insulation, lead wire materials, lengths, and mounting methods to accommodate specific installation needs.
- Sensor Elements: Available as NTC thermistor 50kΩ ±1% at 25°C (TF) or NTC thermistor 10kΩ ±1% at 25°C (TK).
- Insulation Types: Polyimide with elastomer coating for TFPS-Th-PE models; silicone rubber/foil backing is available on specific configurations.
- Lead Wire Options: AWG 26 lead wires are standard, insulated with either PFA (suffix T) or Silicone Rubber (suffix R).
- Cable Lengths: Configurable lengths include 12, 36, 40, and up to 120 inches. Note that models PE and SRE have a maximum lead length of 60".
- Mounting: Sensors feature surface or pressure-sensitive adhesive (PSA) backing for quick mounting; the suffix "-P" indicates inclusion of adhesive, while no suffix denotes without adhesive.
- Electrical Connection: Available as lead wire versions. For thermistor models in this series, the number of wires is always 2-wire.
Dimensions by Model Type
- TFPS-Th-PE-*: 0.20 x 0.47 x 0.079" (5.0 x 12.0 x 2.0 mm)
- TFPS-Th-SRE-*: 0.20 x 0.60 x 0.118" (5.0 x 15.2 x 3.0 mm)
Key Product Differences
The TFPS-Th Series is distinguished from other Thermal Ribbon families by its use of NTC thermistor elements rather than RTD or Thermocouple sensors. Within the series, variations are defined primarily by insulation material and resulting physical dimensions: the PE variant uses polyimide with an elastomer coating for a thinner profile (0.079" / 2.0 mm), whereas the SRE variant utilizes silicone rubber/foil backing, resulting in greater thickness (0.118" / 3.0 mm) and a longer time constant.
PDFs & Manuals