Italia 800 906 907 | Internazionale +39 022 333 1521 | Benvenuti sul nostro nuovo sito web. Avete riscontrato un problema o un bug? Segnalatelo qui.
Balco-Bullet-Probe
Sonda Balco Bullet
- Unità da tetto
- Temperatura condotto aria di mandata/aria di ritorno/aria mista/aria espulsa
- Rilevamento temperatura remoto
Balco-Bullet-Probe
Da
Panoramica del Prodotto
- Accuratezza 70ºF (21,1ºC): +/- 1%
- Materiale in lega (-) Rame
- Materiale in lega (+) Rame
- Applicazioni Aria e HVAC, Edilizia e Manutenzione, Monitoraggio ambientale
- Opzione di calibrazione N/A
- Collegamento elettrico Cavi pigtail
- Lunghezza di inserimento 1 in
- Colore isolamento Arancione, Giallo
- Numero di punti di rilevamento 1
- Corrente di funzionamento 5 mA
- Umidità di funzionamento Da 10 a 95% UR, senza condensa
- Temperatura di esercizio, max 121 °C
- Temperatura di esercizio minima -40 °C
- Dettagli sull'uscita Uscita sensore a 70ºF (21,1ºC)
- Diametro della sonda 0.25 in
- Lunghezza della sonda 1 in
- Tempo di risposta 8 secondi nominali
- ID serie Balco-Bullet-Probe
- Materiale della guaina Acciaio inossidabile 304
- Stabilità +/- 0,05% dopo 1000 ore a 150ºC (302ºF)
- Temperatura di stoccaggio, max 85 °C
- Temperatura di stoccaggio, min. -40 °C
- Coefficiente di temperatura 4618 ppm/ºC
- Campo di misura della temperatura Da -40 a 121 °C
- Tipo di sensore di temperatura RTD Balco da 1K Ohm
- Peso 0.02 lb
- Calibro del cavo 22 AWG
Supported Applications
The ACI Balco Bullet Probe is a temperature sensor designed for use with electronic controllers in commercial heating and cooling building management systems. The bullet style sensor monitors air temperatures and should not be fully submerged in water.
- Air temperature monitoring in HVAC applications
Operating Conditions & Performance
The series operates within a process temperature range of -40 to 121°C (-40 to 250°F) and an ambient humidity range of 10 to 95% RH, non-condensing. The storage temperature range is specified as -40 to 85°C (-40 to 185°F). Performance characteristics for the Balco RTD sensor include:
- Sensor Output: 1000 Ohms nominal at 70°F (21.1°C)
- Accuracy: +/- 1% at 70°F (21.1°C)
- Response Time (63% Step Change): 8 Seconds nominal
- Sensor Stability: +/− 0.05% after 1000 Hours @ 150°C (302°F)
- Maximum Operating Current: 5 mA
Configuration Options
The ACI Balco Bullet Probe features a one-inch stainless steel probe with two, non-polarity sensitive wires. The sensor is manufactured using a double encapsulation process to eliminate moisture effects and increase thermal response times.
Sensor Elements & Output
- Element Type: Balco RTD (PTC - Positive Temperature Coefficient)
- Nominal Resistance: 1000 Ohms at 70°F (21.1°C) with Orange/Yellow lead wire colors
- Temperature Coefficient (0-100°C): 4618 ppm/°C
Housing & Materials
- Probe Material: 304 Stainless Steel
- Product Dimensions: 1.00" (25.4mm) length x 0.250" (6.35mm) diameter
- Lead Wire Insulation: Etched Teflon Colored Leads rated MIL-W-16878/4 (Type E)
- Conductor Material: Silver Plated Copper, 22 AWG (0.65mm)
Mounting & Accessories
The series supports wall mounting using a ¼" Mounting Clip or adhesive U-Mounting Clip options.
- A/MOUNTING CLIP-1/4": Hardware, ¼" Mounting Clip (Galvanized Metal)
- A/MOUNTING U-CLIP-1/4": Hardware, ¼" U-Mounting Clip Adhesive (Plastic w/ Adhesive)
Approvals
The series carries CE, RoHS2, and WEEE approvals. Note that the 20' Length variant is not CE Compliant but remains RoHS Compliant.
Key Product Differences
Variants within this series differ primarily by lead wire length and cable rating options:
- A/BALCO-BP: Standard configuration with 24" (61.0 cm) Etched PTFE Colored Leads.
- A/BALCO-BP-10'CL2P: Features 10 ft (3.05m), 2 Conductor Plenum Rated Cable.
- A/BALCO-BP-20'CL2P*: Features 20 ft (6.10m), 2 Conductor Plenum Rated Cable; this length is not CE Compliant.
PDF & Manuali
