Skip to search Skip to main content Skip to navigation

ZW-REC

ZW Series Receiver

3.0

(5)

Click and hold to zoom

Choose a Variant

Device Function

Gateway

See all Models

$612.88

Item# ZW-REC

QTY

Added to Your Shopping Cart

0 In Stock

Lead Time (If not in stock): 6 weeks

+ Add to Project List

See Specs

Product Specs

<< See all Product Models

Brand
Approvals	ECCN 5A992, EMC 2014/30/EU, LVD 2014/35/EU, RED 2014/53/EU
Data Interface	USB, Ethernet, Wireless
Data Interface Note	Ethernet: RJ45, 10/100 Base-T, USB: Micro-USB 2.0 Type B; Devices Supported, Max: 128
Device Function	Gateway
Display Type	N/A
Electrical Output	N/A
Enclosure Type	N/A
Operating Temperature, Max	70 °C
Operating Temperature, Min	0 °C
Relative Humidity	90% RH non-condensing
Software	Compatible with the OMEGA® Dashboard
Supply Power Note	5 to 30 Vdc, 0.8 W, maximum Safety Qualified AC Power Adaptor (Included): Nominal Output: 9 Vdc @ 0.5 A, Input: 100 to 240 Vdc, 50/60 Hz
Supply Power Type	DC
Supply Voltage	5 to 30 Vdc
Wireless Band	2.4 GHz
Wireless Range	1000 m
Wireless Range Note	2.4 GHz (2400 to 2483.5 MHz), 16 channels
See All Specs Show Less

PDFs & Manuals

ZW-REC-Series_spec ZW-RECIEVER View More

View Less

Software & Drivers

zw_rec_software_zip_software_downloads View More

View Less

Compliance

View Less

current tab: Reviews

Reviews

Show Ratings & Reviews

3.0

(5)

Rated 1 out of 5 by Getting bored of this from Nothing but problems with these devices I purchaced several of these along with a bunch of the ZW-ED devices. Getting the ZW-ED device to communicate with the ZW-REC device seems to be a near impossibility. When I have talked to the people over at Omegas data acquisition department, I was told that they "no longer support the onboard dashboard" and that I need to use the "Omega Enterprise Dashboard". When I tried to install that software the installer tried to update my internet settings (something I cannot do due to company policy). The ZW-ED device "connects" to the ZW-REC as in the blue LED indicator blinks 5 times and shuts off indicating a connection per the manual, but doesnt actually connect. I've had devices dead on arrival (it happens I know) and I've had to update firmware right out of the box. If you want to use these, be ready to put in more time into getting the devices to run than they will actually be running. Customer support = frequent disconnects (every time i've tried to talk with them) and restarting the troubleshooting process every time you try to reconnect. I'm so tired of explaining the same problem and answering the same questions.

Date published: 2018-04-04

Rated 1 out of 5 by SSmith from Software Does Not Recognize Device After a successful setup, Omega Sync software no longer recognizes the receiver.

Date published: 2021-03-26

Rated 5 out of 5 by RussPatt1 from Good things come in small packages I was looking for some lab quality sensors with access to the internet for a client and come across this device by Omega and was presently surprised at the simplicity of the operation and setup. With built in webserver the client is extremely happy and that goes double for me!

Date published: 2017-02-15

Rated 5 out of 5 by SUHERTEC from Good DEVICES I have been using these devices since the ZSERIES models and they have been with me for a long time.

Date published: 2022-02-06

Rated 3 out of 5 by Damosluk2020 from It's OK with Limitations This device works ok within ~500 ft. You are risking yourself if you do anything more. It is NOT nema 4X so please cover it. Pros: - Ethernet Cable, detects transmitter XW easily, not to big. Cons: - Add $395 for OEG just to record and scale your signal to psi, gpm, ft/hr, etc. - Not good for environment agents like water, dust, etc. It isn't covered at all. - Need ~30 min to setup and better be concentrated for it. 3 softwares to setup and record your transmission. - Needs outside power source. - ~500 ft, one signal bar (no obstructions). We couldn't find the perfect position for the advertised 1 mile.

Date published: 2020-10-05