Need assistance? Call us: 1-800-663-4209
CS8DPT-Series
Universal High Accuracy Digital Benchtop PID Controller with USB
- UL and cUL Certified
- Universal Inputs: Thermocouple, RTD, Thermistor, Process Voltage/Current, and Strain
- Simple to Configure and Use
- Standard USB with Optional RS232/485 and Ethernet Communications
CS8DPT-Series
From
$
1,107.84
Product Overview
- A/D Conversion Dual Slope
- Accuracy Selectable
- Accuracy Detail Process/Strain (Process Voltage): 0.03% FS,Process (Process Current ) : 0.03% FS,Type J (Iron-Constantan) : 0.4°C,Type K (CHROMEGA®-ALOMEGA® ) :1.0°C, 0.4°C,Type T (Copper-Constantan ) :1.0°C,0.4°C,Type E (CHROMEGA-Constantan ) :1.0°C ,0.4°C,Type R (Pt/13%Rh-Pt ) :1.0°C, 0.5°C,Type S (Pt/10%Rh-Pt ) :1.0°C,0.5°C,Type B (30%Rh-Pt/6%Rh-Pt ) :1.0°C,0.5°,Type C (5%Re-W/26%Re-W ) : 0.4°C,Type N (Nicrosil-Nisil ) :1.0°C ,0.4°,RTD (Pt, 0.00385, 100Ω, 500Ω, 1000Ω ): 0.3°C,RTD (Pt, 0.003916, 100Ω ): 0.3°C,RTD (Pt, 0.00392, 100Ω ): 0.3°,Thermistor (2252Ω) : 0.2°C,Thermistor (5K Ω) : 0.2°C,Thermistor (10K Ω) : 0.2°C
- CMRR 120 dB
- Control Output SSR Relay
- Data Interface Note Ethernet: IEEE 802.3 10/100 Supported Protocols: TCP/IP, ARP, HTTPGET RS232/RS485: Selectable from menu; both ASCII and Modbus protocol selectable from menu; programmable 1200 to 115K baud; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status
- Decimal Selection 0,001, 0,01, 0,1, None
- Digital Filter Programmable
- Display Type Note 4 or 6-digit, 9-segment LED with size 21 mm (83") and 10.2 mm (40"); RED, GREEN, and AMBER, and programmable colors for process variable, and temperature units
- Form factor Benchtop
- Height 108 mm
- Input Configuration Differential
- Input Type Thermocouple, RTD, Thermistor, mA, Voltage, Strain
- Input Voltage -100 to 100 mV, -1 to 1 Vdc, 0 to 10 Vdc
- Length 230 mm
- Current, Max 4 to 20 mA
- Measurement Type Current, Strain, Temperature, Voltage
- Measuring Range "Process/Strain (Process Voltage):± 50 mV, ± 100 mV, ± 1 Vdc, ± 10 Vdc, Process (Process Current ) : Scalable within 0 to 24 mA, Type J (Iron-Constantan) : -210 to 1200°C, Type K (CHROMEGA®-ALOMEGA® ) :-270 to -160°C,-160 to 1372°C, Type T (Copper-Constantan ) :-270 to -190°C,-190 to 400°C, Type E (CHROMEGA-Constantan ) :-270 to -220°C,-220 to 1000°C, Type R (Pt/13%Rh-Pt ) :-50 to 40°C,40 to 1788°C, Type S (Pt/10%Rh-Pt ) :-50 to 100°C,100 to 1768°C, Type B (30%Rh-Pt/6%Rh-Pt ) :1100 to 640°C,640 to 1820°C, Type C (5%Re-W/26%Re-W ) :0 to 2320°C, Type N (Nicrosil-Nisil ) :-250 to -100°C°,-100 to 1300°C, RTD (Pt, 0.00385, 100Ω, 500Ω, 1000Ω ):-200 to 850°C, RTD (Pt, 0.003916, 100Ω ): -200 to 660°C, RTD (Pt, 0.00392, 100Ω ): -200 to 660°C, Thermistor (2252Ω) : -40 to 120°C, Thermistor (5K Ω) :-30 to 140°C, Thermistor (10K Ω) : -20 to 150°C
- Number of Inputs 1
- Output Detail SSR, Relay, Analog;5A SSR (internal), 3A relay max, analog process output
- Output Signal Current, Voltage
- Polarity Bipolar
- Power Consumption 6 W
- Ramp and Soak Profiling
- Resolution 1°/0.1°; 10 µV process
- RTD Type 100/500/1000Ω Pt sensor; 2-, 3- or 4-wire; α=0.00385 or 0.00392
- Sampling Rate 20 Hz (20 updates/second)
- Series ID CS8DPT-Series
- Supply Power Type AC
- Supply Voltage Selectable to 5, 10, 12, 24 Vdc @ 25 mA
- Temperature Stability Temperature Stability:RTD: 0.04°C/°C;Thermocouple: 25°C (77°F); coldjunction compensation of 0.05°C/°C;Process: 50 ppm/°C
- Thermistor Type 2252 Ω, 5K Ω, 10K Ω
- Thermocouple Type J, K, T, E, N, R, S, B, C, L
- Weight 1.13 kg
Power cord is not included, please see the accessories tab to purchase the appropriate cord for your region.
The OMEGA CS8DPT/CS8EPT is a portable benchtop digital controller and with a large color-changing display. This benchtop controller features 4 Digit dual LED or 6 Digit displays that can be programmed to change color between Green, Amber, and Red at any setpoint or alarm point. Other options include, serial communications, and Ethernet.
This universal temperature and process instrument handles 10 common types of thermocouples, multiple RTDs,thermistors and several process (DC) voltage & current ranges, and strain type of inputs.
Embedded Internet
This OMEGA benchtop devices can serve Web pages over an Ethernet LAN or even over the Internet, making it possible to monitor and control a process through a Web browser (such as Microsoft Internet Explorer®) from anywhere in the facility or anywhere in the world.
Remote Control
For example, using an CS8DPt Series temperature controller to control a heater, an engineer can monitor the temperature, change setpoints or alarm points, turn the heater on and off, or make other modifications from anywhere on the local network or anywhere on the Internet. The Web pages are easily customized, and secure, password protected access to the devices is easily controlled. And it requires absolutely no special software on the engineer’s computer to view the data and “supervise” the controller— nothing other than a Web browser.
E-Mail and Alarm
In fact, the Cs8DPt controller can even send an e-mail to the engineer (or anyone he or she chooses) about an alarm condition or to update the status. Leveraging the technology of the Internet, the engineer could receive a message from the controller on an Internet-enabled pager or cell phone.
Most remarkable is that all this can be accomplished without a computer. The OMEGA CS8DPt controller with fully loaded communication options connects directly to the Ethernet network—not to the serial port of a computer functioning as a “server” and “master” to “slave” instruments connected through serial communications. With the loaded C24 option, these devices are also available with RS232 and RS485, and MODBUS serial communications.
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews
I would like to purchase the 10 pin plug connector for model CS8DPT controller Can you please advise???
Hi,
The part number for the 10 pin connector is CNi-10PIN-CONN.
Date published: 2020-01-31
A way to set max temperature threshold? Once heater is turned on it heats well beyond to the set temperature in SP1 (no change in SP2). Is there a way to set a maximum to prevent this?
Thank you for your inquiry. You must program the MODE from ON.OF to PID.
Date published: 2025-10-28
What does the error E006 mean?
This is for the Loop break error;
Select the loop break (LPbk) parameter. When enabled, this parameter specifies the amount
of time in Run Mode without a change in input value that would signify a sensor malfunction.
For example, if there were a problem in a thermocouple, the input would not change over
time.
Best regards
OMEGA
Date published: 2024-04-23
Ordered (8) with ENET to network over Modbus. Many issues. 1.) Quality - Had to open (3) of them & reconnect cables that have come loose. 2.) Found Config for Modbus can only be done over USB - Weblink only sets IP. 3.) COMM drops. Need help here.
Thank you for your inquiry.
The Configurator software was designed for automatic use via USB but will work via Ethernet if you do some setting changes.
Please contact us directly so we may assist you in more detail
Date published: 2020-05-11
How can I connect the controller to an AC variable power supply? Do i need to modify the internal connections?
Hi CCarlos,
Thank you for the inquiry. Outputs are not compatible with most variable AC supplies. Please forward your request to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2023-03-24
I have purchased five benchtop controllers CS8DPT-C24-EIP-A. All of them are 5-9 degC out when connected to RTD PR-11-2-100-1/8-6-E. Are they need to be calibrated separately? What are calibration options? are Controller/RTD need to calibrate in pair?
Thank you for your inquiry. Please contact our Temperature Department or email your questions to temp@omega.com
Date published: 2020-12-02
Is it possible to order the Platinum series Benchtop digital Temperature controller with a 10A SSR output?
Thank you for your inquiry. This controller can only come with a 5A SSR.
Date published: 2024-01-30
I am unable to configure the CS8DPT TCP Modbus port via weblink. Weblink prompts for password. Please Email me the password for the weblink. Thanks
Hi Ganesh,
Please use following passwords;
log in password 12345678 , Admin password 00000000
Best regards
OMEGA
Date published: 2020-03-12