Need assistance? Call us: 1-800-663-4209
P-L-A-1/4-6-0-P-3
Choose a Variant
Accuracy
Temperature Probe Style
Insulation
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
|
| Accuracy | Class A |
| Cable Length | 3 ft |
| Electrical Connection | Stripped Leads |
| GrossWeightValue | 0.19 |
| Insulation | PVC |
| Nominal Resistance | 100 Ω |
| Nominal Resistance/Curve Note | Pt100 (100Ω @ 0ºC 0.00385Ω/Ω/ºC) Platinum RTDs with Class “A”, 1⁄3 DIN and 1⁄10 DIN Accuracies |
| Number of Wires | 4 |
| Probe Diameter | 0.25 in |
| Probe Length | 6 in |
| Probe Type | Ultra Precise RTD Sensors |
| Process Connection Size | N/A |
| Process Temperature, Max | 100 °C |
| Process Temperature, Min | -29 °C |
| Series ID | P-Ultra-RTD |
| Sheath Material | 304 Stainless Steel |
| Temperature Coefficient | 0.00385Ω/Ω/°C |
| Temperature Coefficient Note | α=0.00385Ω/Ω/°C |
| Temperature Probe Style | Air Probe |
| Temperature Sensor Type | RTD |
| Wire Gauge | 26 AWG |
| Wire Type | Stranded |
| Country of Origin | United States |
| See All Specs | |
PDFs & Manuals
Accessories
meters/controllers
1/16 DIN On-Off LCD Temperature Controllers with Dual Outputs
$356.81 / each
0 In Stock
sensors
Show Ratings & Reviews
Rated 2 out of
5
by
Engineer8736 from
Not as accurate as indicated
Purchased 2 1/10 DIN RTDs and immediately sent them out for calibration. One is at the accuracy limit and the other is significantly outside the accuracy limit.
Date published: 2018-12-06
Rated 4 out of
5
by
li sev from
Good quality
Good quality. No complaints. Shipped in an acceptable amount of time.
Date published: 2023-12-18
Rated 5 out of
5
by
Phil Chivers from
Accurate Low Temp Sensors for NASA
We identified this sensor as one that could be used with a UWB device, that we build, and use at the NASA Facility in Houston. They are easy to calibrate with our PCB and have an industrial appearance with the sheathing around the wiring. So far, we've installed 20 of these in Building 31 at their facility to monitor low temp freezers. Our UWB devices communicate with a network of receivers through the facility and provide "real-time" notifications and alerts if temps fall "out of range".
Date published: 2026-09-17